MOEN INS13349 Single Handle Pulldown Kitchen Faucet Installation Guide
- June 16, 2024
- Moen
Table of Contents
INSTALLATION GUIDE
INS13349 – 06/23 SINGLE HANDLE PULLDOWN
KITCHEN FAUCET
INS13349 Single Handle Pulldown Kitchen Faucet
PLEASE CONTACT MOEN FIRST
For Installation Help, Missing or Replacement Parts
(USA) 1-800-BUY-MOEN (1-800-289-6636)
www.moen.com
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen recommends the use of these
helpful tools. Safety Glasses Adjustable Pliers
Adjustable
Phillips Screwdriver
Image is for reference only (Style varies by model)
Record Purchased Model Number:
(Save instruction sheet for future reference)
Register Online: www.moen.com/product-registration
Parts List
A. Installation Tool
B. Deck Gasket
C. Mounting Washer
D. Mounting Nut
E. Hose Guide Nut
F. Hose Weight
G. Faucet Body
H. Spray Wand
I. Pulldown Hose
J. Pulldown Hose Weight Indicator Mark
K. Outlet Hose
L. Supply Hose Hot
M. Supply Hose Cold
N. Hose Swivel Cover
O. Set Screw
P. Hex Wrench – 3/32”
Q. Alternate Handle
CAUTION — TIPS FOR REMOVAL OF OLD
FAUCET:
Always turn water supply OFF before removing existing faucet or disassembling
the valve.
Open faucet handle to relieve water pressure and ensure that complete water
shut-off has been accomplished.
Place deck gasket (B) onto base of faucet body (G). Place into sink
hole. NOTE: Install with handle on right side only.
Slide mounting washer (C) up onto faucet body (G) under sink and
secure with mounting nut (D).
Tighten mounting nut (D) with
installation tool (A). Use screwdriver through hole in installation tool (A)
to tighten firmly.
Install Hose Guide Nut (E). Finger
tighten.
Connect hot (L) and cold (M) supply
hoses to water supply valves.
Slide hose swivel cover (N)
onto Pulldown Hose (I). Push over swivel until cover snaps in place.
Insert small end of pulldown hose (I) into spout and feed
through Faucet Body (G).Remove and discard plastic cap from end of Pulldown Hose (I).
Insert hose into end of Outlet Hose (K). Push until a “click” is heard. Tug downward to test engagement.
IMPORTANT – Locate Hose
Weight Locator Mark (J) on Pulldown Hose (I). Install Hose Weight (F) just
above start of loop curvature in hose on the same side of hose as locator
mark. Channel Locks may be useful to securely clamp Hose Weight (F).
For the best performance of your new pulldown faucet, Moen
recommends the following:-
Maintain 8″x8″ clear area for the hose and weight to travel, free of any moveable items including (bottles, cleaning supplies, etc.].
See Illustration. -
If non-moveable pipes or other fixtures are interfering, consider repositioning the weight higher on the hose.
-
Periodically check to be sure no obstructions have entered this clear zone.
-
To enhance the performance of your
pulldown or pullout wand, Moen offers the 159060 Hose Guide to isolate the
hose from plumbing lines and other items under the kitchen sink. Call our
Product Consultants at 800-289-6636 or
visit www.moen.com to order part #159060.
Flushing
- Turn on hot (L) and cold (M) water supply.
- Hold Pulldown Hose (I) and turn on faucet (G), allow water to run for 15 seconds.
- Turn off faucet (G).
1. Remove protective cap from Spray
Wand (H). 2. Attach Spray Wand (H) to Pulldown Hose (I). 3. Finger
tighten.
Tighten Pulldown Hose (I), flush
with Spray Wand (H). Do not overtighten.
Check operation of
spray wand. Turn on faucet, spray wand should be in stream mode. Push and
release button on spray wand. The spray wand should change to spray mode. To
enter PowerBoost™ mode, press top button. To exit the boost mode, turn off the
faucet. Note: The spray wand will remain in the last used mode, once faucet is
turned off. Manually choose your desired spray setting as faucet is turned
back on.
A. Unscrew Pulldown Hose (I) from
Spray Wand (H) and remove screen and o-ring.
B. Rinse debris from screen.
C. Reinstall screen and o-ring as shown. Thread Pulldown Hose (I) onto Spray
Wand (H) and tighten as shown in Step 11.
D. Re-check water flow.
- Re set screw (O) using 3/32″ hex wrench (P) and discard.
- Re handle from faucet.
Moen Limited Lifetime Warranty
Moen products have been manufactured under the highest standards of quality
and workmanship.
Moen warrants to the original consumer purchaser for as long as the original
consumer purchaser owns their home (the “Warranty Period” for homeowners),
that this product will be leak -and drip-free during normal use and all parts
and finishes of this product will be free from defects in material and
manufacturing workmanship. All other purchasers (including purchasers for
industrial, commercial and business use) are warranted for a period of 5 years
from the original date of purchase (the “Warranty Period” for non-homeowners).
If this product should ever develop a leak or drip during the Warranty Period,
Moen will FREE OF CHARGE provide the parts necessary to put the product back
in good working condition and will replace FREE OF CHARGE any part or finish
that proves defective in material and manufac-turing workmanship, under normal
installation, use and service. Replacement parts may be obtained by calling
1-800-289-6636 (Canada
1-800-465-6130), or by writing to the
address shown. Proof of purchase (original sales receipt) from the original
consumer purchaser must accompany all warranty claims. Defects or damage
caused by the use of other than genuine Moen parts is not covered by this
warranty. This warranty is applicable only to products purchased
afterDecember, 1995 and shall be effective from the date of purchase as shown
on purchaser’s receipt.
This warranty is extensive in that it covers replacement of all defective
parts and finishes.
However, damage due to installation error, product abuse, product misuse, or
use of cleaners containing abrasives, alcohol or other organic solvents,
whether performed by a contractor, service company, or yourself, are excluded
from this warranty. Moen will not be responsible for labor charges and/or
damage incurred in installation, repair or replacement, nor for any indirect,
incidental or consequential damages, losses, injury or costs of any nature
relating to this product.
Except as provided by law, this warranty is in lieu of and excludes all other
warranties, conditions and guarantees, whether expressed or implied, statutory
or otherwise, including without restriction those of merchantability or of
fitness for use.
Some states, provinces and nations do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from state to state, province to
province, nation to nation. Moen will advise you of the procedure to follow in
making warranty claims. Simply write to Moen Incorporated using the address
below. Explain the defect and include proof of purchase and your name,
address, area code and telephone number.
Moen Incorporated
25300 Al Moen Drive
North Olmsted, Ohio 44070-8022
U.S.A.
INS13349 -06/23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>