iottie iTap2 Wireless Air Vent User Guide

iottie iTap2 Wireless Air Vent

Product Information

Specifications:

• Input Charging Port: Micro USB
• Length: 2.85 inches
• Width: 2.6 inches
• Height: 3.65 inches
• Weight: 3.8 ounces
• Input: 9.0V-1.67A
• Output: 5.0V-20.A
• Compatibility: 12V~24V

Product Usage Instructions

Step 1: Preparing the Metal Plates

A. Lift the Guide from the bottom to stick the Protective Film onto the area where the Metal Plate will be.
B. Put Placement Guide back down, flat against your phone or case.

Step 2: Placing the Metal Plate
Place one of the Metal Plates as indicated by the cut-out on the Guide. Save the other Metal Plate as backup.

Step 3: Mounting and Charging
Connect the charger’s Micro USB input to the charging port of the mount.

Attach the mount to a compatible surface in your vehicle using the provided adhesive or suction cup.

Ensure that your smartphone is positioned correctly on the mount, making contact with the Metal Plate.

If the mount has a solid green light, it indicates that your smartphone is charging successfully.

If the mount has a blinking red light, it indicates that your smartphone is not charging. This could be due to a foreign object detected or overheating of the mount or smartphone. Please remove any foreign objects and ensure that the mount and smartphone are not overheating.

Frequently Asked Questions (FAQ)

Q: How do I attach the Metal Plate to my phone or case?
A: Lift the Guide from the bottom, stick the Protective Film onto the area where the Metal Plate will be, and then put the Placement Guide back down, flat against your phone or case.

Q: What should I do if my smartphone is not charging on the mount?
A: If the mount has a blinking red light, it indicates that your smartphone is not charging. This could be due to a foreign object detected or overheating. Please remove any foreign objects and ensure that the mount and smartphone are not overheating.

Q: Can I dispose of old electrical appliances with the residual waste?
A: No, old electrical appliances must not be disposed of together with the residual waste. They must be disposed of separately.

Q: Where can I find the EU Declaration?
A: You can find the EU Declaration at https://www.iottie.com/support/customerservice

Air Vent Mount

Getting Started

For optimal mounting and charging, please follow the detailed instructions within this manual when using the iTap 2 Wireless Charging Mount. iOttie is not liable for possible damages due to product misuse.

Critical Information

• Placing a Metal Plate
  The position of the Metal Plate on the phone is very important for receiving an optimal charge. Please review installation instructions. Inaccurate placement of the metal plate may cause slow charging and overheating.

• Recommended Mounting
  For optimal holding, it is recommended to portrait mount your phone.
  For thick phone cases or landscape mounting, place the Metal Plate outside of your case to minimize the possibility of slippage. Please review installation instructions.

• Compatibility
  Before using product, make sure your device is Qi Wireless compatible. Compatible devices include iPhone X, iPhone Xs, iPhone Xs Max, iPhone XR, Samsung Galaxy Note S9, S9, S9+, and S8.

• Qi Wireless Charging in Vehicle
  Use the included iOttie Car Charger and Micro USB Cable. If you do use a third party car charger, use a Qualcomm Quick Charge 2.0 or equivalent adapter to receive a wireless charge (with compatible devices).

At a Glance

Metal Plate Alignment Guide

The Qi Receiver Coil is usually located in the center area of the phone. Check with your phone’s manufacturer for Qi coil location. Below are some examples for commonly used phones.

• We strongly suggest you use the included Placement Guide to place the Metal Plate at the bottom of your smartphone or case for receiving an optimal charge.

1. A. Align the + symbol and the side marker lines with the center of your phone or case, making sure the cut-out for the Metal Plate is at the bottom.
   B. Once aligned, remove adhesive strip at the top and stick the Placement Guide to phone.

2. A. Lift the Guide from the bottom to stick the Protective Film onto the area where the Metal Plate will be.
   B. Put Placement Guide back down, flat against your phone or case.

3. Place one of the Metal Plates as indicated by the cut-out on the Guide. Save the other Metal Plate as backup.

4. Remove the placement guide.
   Then, simply position the metal plate on top of the magnetic mount head.

Mount Installation

Please use caution when adjusting the Twist Lock on air vent blade.
Do not apply excessive pressure to Twist Lock as this may damage the blades. iOttie is not liable for damages due to product misuse.

1. Open Twist Lock and push mount completely onto vent blade.
2. Slowly tighten Twist Lock for a secure connection to the air vent.
3. Plug Micro USB into the charging mount on back of magnetic mounting head.
4. Insert car charger into your vehicle’s power port.

The iTap 2 Wireless Air Vent Mount | does not have an on/off switch. Once the device is plugged into the power source it will stay on.

Wireless Charger Specifications

INPUT| 9.0V-1.67A

5.0V-20.A

---|---
CHARGING PORT| MICRO USB
LENGTH| 2.85″
WIDTH| 2.6″
HEIGHT| 3.65″
WEIGHT| 3.8oz

Car Charger Specifications

5V – ЗА
9V – 2A
12V – 1.5A

Charging Indicator

Declaration of Conformity (FCC)

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
You can refer to the following completed FCC warnings.
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Operational Warnings

During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot. if the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. Device is only to be operated in a dry, indoor environment.

Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the manufacturer.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Operating this device in a hot environment or in direct sunlight for a long period of time may cause malfunctions. We recommend keeping the product in cooler temperatures.
Please use included components for an optimal experience. To support Qi wireless charge when using a third party car charger or a USB Power Adapter use a minimum output of both “9.0V-1.67A or 5.0V-2.0A” and at least QC 2.0.
The product’s signal could possibly interfere with you TPMS (tire pressure monitoring system). If you notice that your TPMS light turns on, please try using your mount in different locations to avoid the signals from interfering with each other.
California Proposition 65 this product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

Caution
OLD ELECTRICAL APPLIANCES MUST NOT BE DISPOSED OF TOGETHER WITH THE RESIDUAL WASTE, BUT HAVE TO BE DISPOSED OF SEPARATELY.

IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

EU Declaration
Hereby, iOttie declares that the radio equipment type HLCRIO138 is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following web address: https://www.iottie.com/wp-content/uploads/2023/05/doc- hicrio138.pdf

If you love your iOttie product, let us know by leaving a review online, or connect with us on our social platforms.

www.iottie.comcs

cs@iottie.com

References

• iottie.com/wp-content/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>