MONACOR ATS-22T Communication Systems Instruction Manual

MONACOR ATS-22T Communication Systems

Product Information

The ATS-22T is a 16-channel Digital Voice Transmission System designed for various applications such as tour guide systems, trainer/student systems, and any other scenario where a specific voice source needs to be distributed to one or more receivers. It operates within the frequency range of 863-865 MHz and offers high resistance to interference due to its digital transmission technology. The system allows for parallel operation of up to 4 different channels without any interference. Additionally, it is license-free for use in the EU.

Features:

• 16-channel miniature transmitter
• Can be used with microphones and audio line signals
• Intercom function with headset
• Headset with activation switch for intercom function
• Audio line input via 3.5 mm jack
• LCD display for indicating channel and battery status
• Mute button
• Transmitting power: 10 mW (EIRP)
• Operating range: approximately 70 m
• Power supply via integrated rechargeable lithium battery (3.7 V/600 mAh)
• Micro USB charging connection for ATS-12CB, ATS-35CB, or USB charger (available at option)
• Dimensions: 40 x 80 x 12 mm
• Weight: 37 g

Specifications:

Product Usage Instructions

Charging the Transmitter
To ensure proper operation, it is recommended to fully charge the transmitter before use. Follow these steps:

1. Locate the micro USB charging connection on the transmitter.
2. Connect the supplied ATS-12CB or ATS-35CB charger to the micro USB charging port.
3. Alternatively, you can use a compatible USB charger (not included) to charge the transmitter.
4. Allow the transmitter to charge until the battery is fully replenished. The charging time may vary depending on the remaining battery capacity.
5. Once fully charged, disconnect the charger from the micro USB charging port.

Connecting the Headset and Audio Source
Follow these steps to connect the headset and audio source to the transmitter:

1. Ensure the transmitter is turned off.
2. Locate the 3.5 mm jack on the transmitter.
3. Connect the headset to the 3.5 mm jack. Ensure a secure connection.
4. If using a microphone, connect it to the headset or directly to the 3.5 mm jack.
5. If using an audio line source, connect it to the 3.5 mm jack.

Powering On and Selecting Channels
Before using the transmitter, follow these steps to power it on and select the desired channel:

1. Press and hold the power button located on the transmitter for a few seconds until the LCD display turns on.
2. The LCD display will show the current channel number.
3. Use the channel selection buttons, if available, to navigate through the available channels.
4. Select the desired channel for transmission.

Intercom Function
The ATS-22T transmitter features an intercom function that allows communication between the transmitter and receiver ATS-22R.

Follow these steps to activate the intercom function:

1. Ensure the transmitter and receiver are both powered on.
2. Press the activation switch on the headset to activate the intercom function.
3. Speak into the headset microphone to transmit your voice to the receiver.
4. Release the activation switch to stop transmitting.

Mute Function
The transmitter includes a mute button that allows you to temporarily disable the transmission of audio. To use the mute function, follow these steps:

1. Locate the mute button on the transmitter.
2. Press the mute button to mute the audio transmission.
3. Press the mute button again to unmute and resume audio transmission.

Operating Range
The ATS-22T transmitter has an operating range of approximately 70 meters. Please ensure that the transmitter and receiver are within this range for optimal performance.

Frequently Asked Questions (FAQ)

• Q: Can I use multiple transmitters simultaneously?
  A: Yes, you can operate up to 4 different channels simultaneously without any interference.

• Q: Is the ATS-22T system license-free in the EU?
  A: Yes, the ATS-22T system is license-free for use in the EU.

PRODUCT INFOS

16-channel Digital Voice Transmission System

16-channel Digital Voice Transmission System, 863-865 MHz

• Suitable as a tour guide system, trainer/student system, and for any other application in which a certain voice source is to be distributed to one or more receivers
• High resistance to interference due to digital transmission
• Parallel operation of up to 4 different channels is possible without any interference
• Licence-free in the EU

16-channel miniature transmitter

for microphone operation and audio line signals, with intercom function.

• Supplied with headset
• Activation switch for intercom function with the receiver ATS-22R
• Audio line input via a 3.5 mm jack at the headset
• LCD for indicating channel and battery status
• Mute button
• Transmitting power: ≤ 10 mW (EIRP), operating range: approx. 70 m
• Power supply via integrated rech. lithium battery (3.7 V/600 mAh)
• Micro USB charging connection for ATS-12CB, ATS-35CB, or USB charger, available at option
• Dimensions: 40 x 80 x 12 mm
• Weight: 37 g

Licence-free in the EU.

TECHNICAL SPECIFICATIONS

ATS-22T

General information

• Description 16-channel digital miniature transmitter
• Carrier frequency range 863-865 MHz
• Admiss. ambient temp. 0-40 °C

Specifications transmitter

• Transmitting power ≤ 10 mW
• Operating range 70 m
• Power supply transmitter integrated rech. lithium batt. (3.7 V/600 mAh)
• Width transmitter 40 mm
• Height transmitter 80 mm
• Depth transmitter 12 mm
• Weight transmitter 37 g
• Connections transmitter 3.5 mm jack (microphone/line in), micro USB charging port

Contact Information

• www.monacor.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>