Cloudy Bay LFMC815SMWH 8 Inch Round Low Profile Smart Ceiling Light Instruction Manual
- June 15, 2024
- Cloudy Bay
Table of Contents
INSTALLATION INSTRUCTIONS
LFMC815SMXX
LFMC815SMWH 8 Inch Round Low Profile Smart Ceiling Light
PLEASE READ CAREFULLY BEFORE INSTALLING FIXTURE
Save these instructions, as you may need them at a later ate
Thank you for purchasing Cloudy Bay Smart LED Lighting Fixtures.
8 INCH ROUND LOW PROFILE SMART CEILING LIGHT 
GENERAL: All electrical connections must be in
accordance with local and National. Electrical Code (N.E.C) standards. If you
are unfamiliar with proper electrical wiring connections, contact and obtain
the services of a qualified electrician. Use UL or IEC approved wire only for
input/output connections.
Remove fixture and mounting components from the box, and make sure that no
parts are missing, by referencing the illustration in the illustration
instructions.
PRODUCT CARE
After Sales Service
- Please discontinue to use product right away if product shows any visible defect and contact customer service.
- If there is any problem with our lights for non-human reasons, please contact customer service, we will send you brand new replacement without need to returning goods or full refund.
- If you are not completely satisfied with product after installation but prefer not to disassemble, contact with us right away, we will provide comparable compensations.
3-Year Limited Warranty
LIMITED WARRANTY: This ixture s warranted to be free from defects in
workmanship and material for up o 3-years. Based upon reasonable household
usage, when used in acordance with package and included nstructions. If this
ixtue does not Lt or the time period guaranteed, manufacture willsend youa
replacement fixture upon receipt of the returned fixture, registe receipt, and
proof of purchase. To contact us, lease emal us at
[email protected] o find out
howto retun thefxture, We are committed to making high quality products.
Returning the ixture will elp us monitor and frther improve product qulity.
This replacement s the sole remedy available, and LIABILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.
Note: This product is a smart ight, using Direct Digital Controls rather
than triac dimming. Here is two dimming way for you reference:
- Download Cloudy Bay’s AP, go to product group or single product page, adjust the brightness and CCT of white light or color light on control panel; you can also go to home page, click product group o single product’s common function, adjust brightness and color temperature.
- Control with smart voice device such as Google Assistant or Amazon Alexa if you have installed it successfully.
**** If you only have a dimmer at hand, set it to highest level only, if light performance is not good, we strongly advise you to change to a regular On/Off switch instead.
Installation Instructions
Component List:
-
TURN OFF POWER SUPPLY BEFORE YOU START INSTALLATION!
-
Fix the MOUNTING BRACKET CC to junction box( excluded) with 2×32 SCREW AA.
-
Pull utive wire, neutral wie and ground wire with junction box, and connect with LIGHT UNIT’s live wire, neutral wire and ground wire accordingly with WIRE NUT BB.
-
4-Raise up light unit, insertinto MOUNTING BRACKET CC.
-
Detalsinstruction or step 4
1. Align the notch on MOUNTING BRACKET CC and buckle the LIGHT UNIT into it
2. Rotate the LIGHT UNIT counter clockwise (refer to open and close icon on back-ite diffuser) il it goes to edge of rail.
-
RESTORE POWER
-
Installation is completed, please go ahead to USER MANUAL & VOICE CONTROL GUIDE EE 10 complete setting
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residental installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmiul interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmiul interferens o radio oreleison reception
which can be delermined by uming the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment nto an outlet on a cirauit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications o this device not explicily
approved by manufacturer could void your authoriy to operate this equipment
This device complies with part 15 of the FCC Rules. Operation s subject to the
following two conditions: (1) This device may not cause harmful inteference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
** Driver unit of this product can’t be inserted into pancake junction
box(1/2” Deep).
Please confirm it before your purchasing and installation!
QUESTIONS? COMMENTS?
SUGGESTIONS? COMPLAINTS?**
Please contact with us through
[email protected] or
[email protected] We will do our
best to make it right for you. Thank you very much!