Cloudy Bay LJD008SMXX-4PK 8 Inch Smart LED Recessed Down Light Instruction Manual
- June 6, 2024
- Cloudy Bay
Table of Contents
Cloudy Bay LJD008SMXX-4PK 8 Inch Smart LED Recessed Down Light
GENERAL: All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL or IEC-approved were only for Input/output connections. Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions. This retrofit assembly is accepted as a component of a led luminaira where the suitability of the combination shell be determined by csa or canadian authorities having jurisdiction. This device is not in!Bad for use with emergency exitsTurn power off before installation, inspection, or removal. Use all necessary precautions while performing this procedure. Properly ground electrical enclosure. IT IS IMPERATIVE THAT &. THE OUTLET BOX BE PROPERLY GROUNDED. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE SAFETY WILL BE COMPROMISED. This Integrated LED Fixture has no lamp/bulb to replace.
WARNING- RISK OF FIRE OR ELECTRIC SHOCK
LED Ultra Slim Panel kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the panel kit does not exceed the input rating of the luminaire. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation. To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. The inside of the ceiling must be waterproof
Component LIST
Note : This product is a smart light, using Direct Digital Controls rather than triac dimming. Here is two dimming way for you reference
- Download Cloudy Bay’s APP, go to product group or single product page, adjust the brightness and CCT of white light or color light on control panel; you can also go to home page, click product group or single product’s common function, adjust brightness and color temperature
- Control with smart voice device such as Google Assistant or Amazon Alexa if you have installed it successfully
FCC STATMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:This device may not cause harmful end 1This
device must accept any received, including Interference that may cause
undesired operation.
NOtE : This equipment has been tested end pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful in18rferance in a residential installation . This equipment generates,
uses end can radiate radio frequency energy end, if not installed end used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there Is no guarantee that Interference wlll not
occur In a particular Installation. If this equipment does cause hannful
interference to radio or television reception, which can be determined by
turning the equipment off end on, the user is encouraged to try to C0IT’8Ct
the interference by one or mora of the following measures: Reorient or
relocate the receiver antenna. Increase the separation between the equipment
and receiver. Inst.all the product onto on a circuit different that 1o which
the receiver Is connected. Consult with the dealer or an experienced radio/TV
technician for help.
CAUTION : Any changes made to the electronics circuit will void this
equipment’s compliance with Part 15 of the FCC Rules and should not be
operation
3-Year Limited Warranty
LIMITED WARRANTY: This fixture is warranted to be free from defects in workmanship and material for up In 3-years. Based upon reasonable household us.age, when used In accordance with the package and included Instructions. If this fixture does not Last far the time period guaranteed, the manufacturer will send you a replacement filter upon receipt of the returned filter, register, and proof of . To contact us, please email us at to find out how to return the fixture. We are committed In making high-quality pm ducts. Returning the fixture will help us monitor and further impmve pmduct quality. This replacement is the soil! remedy available, and LIABllllY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED
INSTALLATION INSTRUCTIONS
- Cut a round hole in 08-1/4inch with a template in the package. (Fig.1)
- Insert flat screwdriver’s blade into knock-out hole, swing left and right until the metal plate fall down. (Fig. )
- Put wire clamp into knock-out hole. (Fig. )
- Open connection box by pulling up the cover (Fig. )
- Insert the white supply wire (neutral) into quick wire connector with the preassembled white fixture wire. Insert the black supply wire (hot) into quick wire connector with the preassembled black fixture wire. Insert supply ground wire into quick
- re connector with the preassembled ground wire. Make sure all connections are secure tuck all wires into the junction box. Put on the cover of junction box(Fig. )
- Connect the low voltage cable to the light kit – the arrows on the male and female parts of the connector between the driver and the fixture should match. (Fig. )
- Squeeze both TORSION SPRINGS arms together and insert into the above ceiling. (Fig. ) Installation is completed. (Fig. )
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>