Cloudy Bay LMFFM714SMWH 7.5 Inch Round Low Profile Smart Disk Light Instruction Manual

INSTALLATION INSTRUCTIONS
LMFFM714SMWH 7.5INCH ROUND LOW PROFILE SMART DISK LIGHT

LMFFM714SMWH 7.5 Inch Round Low Profile Smart Disk Light

Thank you for purchasing CloudyBay Smart LED Lighting Fixtures.
‘GENERAL: All electrical connections must be in accordance with local and National.
Electrical Code (N.E.C) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL o IEC approved wire only for input/output connections.
Remove fixture and mounting components from the box, and make sure that no parts issing, by referencing the illustration in the illustration instructions

PRODUCT CARE

After Sales Service

1. Please discontinue to use product right away if product shows any visible defect and contact customer service.
2. If there s any problem with our lights for non-human reasons, please contact customer service, we will send you brand new replacement without need to returning goods or full refund
3. If you are not completely satisfied with product after installation but prefer not to disassemble, contact with us right away, we will provide comparable compensations.

3-Year Limited Warranty

LIMITED WARRANTY: This ixture i warranted to be ree from defects in workmanship and material for up to 3-years. Based upon reasonable household usage, when used in accordance with package and included nstructions. I this ixtre does notLast for the time period guaranteed, manufacture willsend youa replacement fixture upon receipt of th returned fixture, reiste receipt, and proof of puchase. To contact us, please email us at smart@cloudybaylighting.com to find out how to return the fixture. We are committed to making high quality products.Returning the ixture will elp us monitor and frther improve product quality. This replacement s the sole remedy aveilzble, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.
Note: This product is a smart light, using Direct Digital Controls rather than triac dimming. Here is two dimming way for you reference:

1. Download Cloudy Bay’s AP, go to product group or single product page, adjust the brightness and CCT of white light or color light on control panel; you can also go to home page, click product group or single product’s common function, adjust brightness and color temperature.
2. Control with smart voice device such as Google Assistant or Amazon Alexa if you have installed it successfully.

If you only have a dimmer at hand, set it to highest level only, if light performance is not good, we strongly advise you to change to a regular On/Off switch instead.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inferference to radio communications. However, there is no guarantee that interference will not occur in a particular instalation. If this equipment does cause harmiul interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consultthe dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicilly approved by manufacturer could void your authority to operate this equipment
‘This device complies with part 15 of the FCC Rules. Operation s subject to the following two condions: (1) This device may not cause harmful interference, and (2) ths device must accept any interference received, including interference that may cause undesired operation
RF Exposure Information
‘This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

PLEASE READ CAREFULLY BEFORE INSTALLING FIXTURE
Save these instructions, as you may need them at a later date
Component List:

WARNING

• Risk of fire or electrical shock. LED Panel installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualifiedelectrician. The use of a licensed electriian is highly recommended.
• As with all electrical components there is always a isk of fre or electric shock if handled and/or installed incorrectly.
• Disconnect power at circuit breaker panel before any installation.
• Installthis product only n situations as per the general nstructions above.
• Do not make or lter any open holes in any enclosure or any electrical component during installation.
• To prevent wiring damage or abrasion to the wires do not expose wiring to sharp edges of sheer metal or other sharp objects.
• Do not use when the enclosure is damaged or broken in any way.
• Do not ater, relocate or remove wiring, lamp holder power supply or any other electrical component.
• Minimum operating temperature 4°F (-15.5°C). Lamp life may be affected outside these temperatures.

1. SHUT OFF MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOXCIRCUIT BREAKER!

2. Remove contents from box. Ensure that not part is missing. Refer to the illustration cluded with this instruction manual.

3. Thread fixture screw into appropriate threaded holes of outlet box (Refer to Figure one).

4. Make the following wire connections (Fig. 1 using the wire nuts in package) BLACK SUPPLY WIRE(Line) TO BLACK FIXTURE WIRE WHITE SUPPLY WIRE(Neutral) TO WHITE FIXTURE WIRE SUPPLY GROUND WIRE TO FIXTURE GROUND WIRE
   If necessary, wrap all wire connection in electrical tape to ensure a secure connection.

5. Carefully tuck all wires back into the outlet box .

6. Align the fixture pan over the outlet box and feed the fixture screw through the keyhole slots.

7. Rotate the fixture clockwise until fixture screw slide into the narrow end of keyhole slots, then tighten it firmly.

8. Attach the lens cover by rotating clockwise to secure in place.

9. Restore power at fuse box/circuit breaker, check operation of integrated light fixture(Figure 2)

10. Installation is completed , follow User Manual to set up light.

INSTALLATION INTO EXISTING RECESSED FIXTURE WITH COMPATIBLE ORANGE

CONNECTORS

1. Fix torsion springs on light body using 2 screws attached in package.

2. Remove the existing trm instaled i the recessed housing (if necessary).

3. Discard the medium base adapter.

4. Connect the two terminals together.

5. Insert the torsion springs into the fixture housing brackets. Gently push the product  up and torsion springs 5o they begin to expand and lift the product in place.

6. Gently push the product in until it is flush to the ceiling.
   

7. Refer to Owner Manual and Voice Control Guide to set up products.

INSTALLATION INSTRUCTIONS FOR EXISTING RECESSED FIXTURE

1. Remove the existing trim installed in the recessed housing (if necessary).

2. If applicable, side the lamphalder bracket o ts upward maximu position. f ecessary, remove the lampholder mounting bracket by removing the wing nut and the lampholder from the bracket, then attach the provided label o the exsting luminaire.

3. Install the medium base adapter into the socket.

4. Connect the two terminals together.

5. Insert the torsion springs into the fixture housing brackets.
   

6. Gently push the product in until it is flush to the ceiling.

7. Referto Owner Manual and Voice Control Guide to set up products.

QUESTIONS? COMMENTS? SUGGESTIONS? COMPLAINTS?
Please contact with us through
Toll-Free Phone Number: (1)877-870-5171
smart@cloudybaylighting.com
orinfo@cloudybaylighting.com
We will do our best to make it right for you. Thank you very much!

Documents / Resources

| Cloudy Bay LMFFM714SMWH 7.5 Inch Round Low Profile Smart Disk Light [pdf] Instruction Manual
LMFFM714SMWH 7.5 Inch Round Low Profile Smart Disk Light, LMFFM714SMWH, 7.5 Inch Round Low Profile Smart Disk Light, Round Low Profile Smart Disk Light, Low Profile Smart Disk Light, Profile Smart Disk Light, Smart Disk Light, Disk Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>