Cloudy Bay LFMC1224SMWH 12-Inch LED Flush Mount Ceiling Light Instruction Manual
- June 6, 2024
- Cloudy Bay
Table of Contents
INSTALLATION INSTRUCTIONS
LFMC1224SMXXYY
PLEASE READ CAREFULLY BEFORE INSTALLING FIXTURE
Save these instructions, as you may need them at a later date.
Thank you for purchasing CloudyBay Smart LED Lighting Fixtures.
12INCH ROUND LOW PROFILE SMART CEILING LIGHT
GENERAL: All electrical connections must be in accordance with local and
National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections, contact and obtain the services of a qualified
electrician. Use UL or IEC approved wire only for input/output connections.
Remove fixture and mounting components from the box, and make sure that no
parts are missing, by referencing the illustration in the illustration
instructions.
Turn power off before installation, inspection, or removal. Use all necessary
precautions while performing this procedure.
Consult a qualified electrician to ensure correct branch circuit conductor.
Min 90°C supply conductors.
Properly ground electrical enclosure. IT IS IMPERATIVE THAT THE OUTLET BOX BE
PROPERLY GROUNDED.
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE SAFETY WILL BE
COMPROMISED.
This Integrated LED Fixture has no lamp/bulb to replace.
Procedure to create a group: go to APP home page; b. click one product that you like to add to a group; c. click edit icon on control panel’s top right corner; d. select Create Group; e. click Add icon before product name; 1. name the group and save it.
3-Year Limited Warranty
LIMITED WARRANTY: This fixture is warranted to be free from defects in workmanship and material for up to 3-years. Based upon reasonable household usage, when used in accordance with package and included instructions. If this fixture does not last for the time period guaranteed, manufacture will send you a replacement fixture upon receipt of the returned fixture, register receipt, and proof of purchase. To contact us, please email us at [email protected] to find out how to return the fixture. We are committed to making high quality products. Returning the fixture will help us monitor and further improve product quality. This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.
Installation Instructions
Component List:
|
---|---
① Turn off power supply before you start installation.| ② Use Philips
screwdriver to fix two screws AA to junction box ( junction box is not
included), leave 5mm space between screw head and junction box.
|
③ Raise mounting bracket and let screws go through keyhole slot, twist
mounting bracket till screw go to the end of keyhole slot.|
④ Use Philips screwdriver to fix the mounting bracket BB on junction box firmly.
|
⑤ 0 Identify power supply’s live wire and neutral wire, insert live wire into
connector with black wire, insert neutral wire into connector with white wire,
Note: If power supply’s wires are not soldered or not solid wire, you need
to hold quick connector, and twist wire until it goes out, then use wire
connector CC to do wiring.| ⑥ Tuck wires and connectors into junction box
carefully, twist light unit DD counter clockwise until it lock on mounting
bracket firmly. NOTE: Ground wire is not required for plastic body lighting
fixture.
| ⑦ Installation complete, please refer to User Manual and Voice control EE to
set up this light.
Note: This product is a smart light, using Direct Digital Controls rather
than triac dimming. Here is two dimming way for you reference: 1. Download
Cloudy Bay’s APP, go to product group or single product page, adjust the
brightness and CCT of white light or color light on control panel; you can
also go to home page, click product group or single product’s common function,
adjust brightness and color temperature 2. Control with smart voice device
such as Google Assistant or Amazon Alexa if you have installed it
successfully.
: if you only have a dimmer at hand, set it to highest level only. If light
performance is not good, we strongly advise you to change it to a regular
switch.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiver antenna.
- Increase the separation between the equipment and receiver.
- Install the product onto on a circuit different from that to which the receiver is connected.
- Consult with the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes made to the electronics circuit will void this equipment’s compliance with Part 15 of the FCC Rules and should not be operated.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.