Cloudy Bay CBST03BLORB Indoor/Outdoor Step Light Instruction Manual

Cloudy Bay CBST03BLORB Indoor/Outdoor Step Light

GENERAL

All electrical connections must be in accordance with local and national electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring Connections, contact and obtain the services of a qualified electrician. Use UL or IEC-approved wire only for input/output connections. Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions. # Need to work with Bluetooth gateway, Model CBSTO3BLWHG-6PK, CBSTO3BLORBG-6PK include gateway Turn power off before installation, inspection, or removal. Use all necessary precautions while performing this procedure. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90°C supply conductors. Properly ground electrical enclosure. IT IS IMPERATIVE THAT THE OUTLET BOX BE PROPERLY GROUNDED. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE, SAFETY WILL BE COMPROMISED. This Integrated LED ixture has no lamp/bulb to replace. DON’T SUBMERGE THE LIGHT BODY INTO WATER INSTALL IT IN AN AREA WITH HIGH SALTY MOISTURE OR A CORROSIVE ENVIRONMENT WILL LEAD TO FAST CORROSION SINCE IT IS NOT DESIGNED FOR THIS PURPOSE

TROUBLESHOOTING

1. Check that the line voltage at the fixture is correct
2. Ensure that there is the voltage at lamp fixture wires
3. If there is no voltage, then check all connections.
4. Check that fixture is grounded properly.-

fixture does not light:

1. Check switch to ensure that there are no defects. Check fuse/circuit breaker for trips, then check wiring connections.

CLEANING AND MAINTENANCE

CAUTION: Ensure fixture temperature is cool enough to touch. DO NOT clean or perform maintenance while fixture is energized.

• Clean lens and fixture with a non-abrasive cleaning solution.
• Do not open fixtures to clean LED. Do not touch the LED.
• Do not spray liquid directly on to LED, LED driver or wiring.

3-Year Limited Warranty

LIMITED WARRANTY: This fixture is warranted to be free from defects in workmanship and material for up to 3-years. Based upon reasonable household usage, when used in accordance with the package and included instructions. If this fixture does not last for the time period guaranteed, manufacture will sendyou a replacement fixture upon receipt of the returned fixture, register receipt, and proof of purchase. To contact us, please email us at smart@cloudybaylighting.com to find out how to return the fixture. We are committed to making high quality products. Returning the ixture will help us monitor and further improve product quality. This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.

PARTS

1. 0UTLET BOX (EXCLUDED)
2.  FIXTURE SCREWS*
3.  MOUNTING BRACKET
4. BLACK FIXTURE WIRE
5. WHITE FIXTURE WIRE
6.  FIXTURE GROUND WIRE
7.  WIRE NUTS
8.  LIGHT BODY INTEGRATED WITH FACE COVER
9.  HOUSE GROUND WIRE
10. LIVE WIRE
11. NEUTRAL WIRE
12.  SPRING CLIP
13.  WASHER

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Ihis equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocCur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase tne separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer COuld void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Ihis device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>