Ariete 6235 Steam Iron User Manual

Ariete 6235 Steam Iron

IMPORTANT WARNINGS

• READ THESE INSTRUCTIONS CAREFULLY.
• The appliance has been designed for home use only and must not be used for commercial or industrial purposes.
• We decline any responsibility resulting from misuse or any use other than those covered in this booklet.
• We suggest you keep the original box and packaging, as our free-of-charge service does not cover any damage resulting from inadequate packaging of the product when this is sent back to an Authorised Service Centre.
• This product complies with the 2006/95/EC Directive and EMC Directive 2004/108/EC.

Danger for children

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Do not let the power cord hang in a place where it could be grasped by a child.
• Cleaning and user maintenance shall not be done by children without supervision.
• Children must be supervised at all times to ensure they do not play with the appliance.
• Do not leave the packaging near children because it is potentially dangerous.
• In the event that this appliance is to be disposed of, it is suggested that the power chord be cut off. It is also recommended that all potentially dangerous components be rendered harmless to prevent children from hurting themselves when playing with the apparatus.

A Danger due to

• Boce, ise that the votag so me on the rating plate matches the local voltage supply.
• Always connect the iron to an earthed socket.
• Do not immerse the appliance in water or other liquids.
• Do not start ironing if your hands are wet or if you are barefoot.

Danger of Damage Originating from Other Causes:

1. Fill up the tank with water before starting up the appliance. Ensure to unplug the appliance before pouring water into the tank.
2. When filling the water tank, always use the measuring cup provided. Avoid putting the iron directly underneath the tap.
3. Close the cover after filling, ensuring that it is perfectly closed.
4. Turn on the appliance only when it is in the working position.
5. The appliance may emit a little smoke when used for the first time, which is normal due to lubricated components.
6. Place the appliance on a stable and well-lit horizontal surface during use.
7. Never leave the appliance unattended when connected to the power supply.
8. The appliance must be used and rested on a stable surface.
9. When placing the iron on its stand, ensure that the surface is stable.
10. When leaving, even for a short period, turn off the iron, place it on its stand, and always unplug the power cord.
11. Do not use the appliance if dropped, showing visible signs of damage, or leaking. All repairs, including the replacement of the power cord, must be done by an Authorized Service Centre or qualified personnel.
12. Do not use the appliance if the power cord appears damaged; authorized Ariete service centre must repair and replace the power cable, or the warranty will be forfeited.

Warning of Burns:

1. Never try to iron garments being worn.
2. Do not touch the metal parts of the iron when in operation and for several minutes after it is turned off, as it could cause burns.
3. Do not aim the jet of steam towards parts of the body or pets.

Warning – Material Damage:

1. Remove any labels and protections from the soleplate before using the appliance for the first time.
2. Always unwind the power cord before use.
3. The use of extensions not approved by the manufacturer can result in damage to property and personal injury.
4. Do not use sparkling (carbonated) water; if your water supply is very hard, use demineralized water.
5. Do not place the iron on top of the power cord when it is hot.
6. Do not bend the power cord protection when wrapped around the iron, as the cord could break over time.
7. Do not pull the power cord to unplug the appliance.
8. Clean the appliance only with a soft, slightly damp cloth after unplugging and allowing all parts to cool down. Never use solvents that may damage plastic parts.
9. Do not wrap the power cord around the soleplate when the iron is hot.
10. Do not put the soleplate in contact with metal surfaces.
11. Always turn off the iron by turning the thermostat knob to the position MIN and unplugging the power cord before removing the tank to fill it with water or to empty it, before cleaning the iron, and immediately following use.
12. Always turn off the appliance by turning the temperature control knob to “OFF” and disconnecting the main plug from the wall socket before filling the iron with water or pouring the remaining water out.
13. Do not expose the appliance to atmospheric agents (rain, sun, etc.).

Important Note: When using the iron for the first time, test it on an old piece of fabric to ensure that the soleplate and water tank are completely clean. KEEP THESE INSTRUCTIONS IN A SAFE PLACE AT ALL TIMES.

DESCRIPTION OF THE APPLIANCE

• A -Spray nozzle
• B -Water tank filling cover
• C -Steam adjustment selector
• D-Spray button
• E -Steam button
• F -Water measure
• G – Reference for temperature setting
• H-Power cord protection
• -Iron stand
• J- Iron temperature control lamp
• K – Temperature adjustment knob
• L -SELF CLEAN button
• M – Tank
• N – Soleplate

INSTRUCTIONS FOR USE

Filling the Tank Before Use:

• Warning: Make sure the iron is unplugged from the supply mains before filling the tank with water.
• Set the steam control knob (C) onto “0” (Fig. 2).
• Open the door (B) by pushing it upwards and, holding the iron horizontally, fill the water tank up to the maximum level using the measuring cup (F) provided (Fig. 5).
• Close the cover (B) again. If your tap water is very hard, use demineralized water. NEVER exceed the MAX mark when filling the tank.
• Do not pour vinegar, descalers, or other scented substances into the tank; under penalty of immediate cancellation of the warranty.
• If it proves necessary to add water while ironing, always turn off the iron and unplug the power cord before filling the tank with water.
• Open the water filling cover and turn the iron upside down to empty the tank.

Turning On the Appliance:

• It is possible that there white powder leaks from the soleplate the first time the iron is used; this is normal, and the effect will disappear after a few jets of steam.
• You may notice a delay in the formation of steam the first time the iron is used; this is normal and is because the water starts to circulate inside the iron. It may be necessary to press the steam and spray button a few times for it to operate correctly.
• Rest the iron upright on the iron stand (1) (Fig. /).
• Plug it into the socket. The temperature control lamp (J) turns on.
• Select the desired temperature by turning the temperature adjustment knob (K), lining it up with the reference (G) on the iron. When the iron reaches the selected temperature, the lamp (J) turns off (the temperature lamp turns off and on while ironing, indicating that the iron is maintaining the right temperature).
• Follow the instructions on the care label of the garment to be ironed so that the dots shown on the iron correspond to those shown on the label.

Ironing Tips and Suggestions

1. Avoid Hard Objects:
   • Do not run the iron over zippers or other objects made of hard material to prevent damage to the anti-adherent coating.
2. Organize by Material:
   • Divide the articles to be ironed according to the types of material, such as wool with wool, cotton with cotton, etc.
3. Temperature Control:
   • Start with fabrics that require lower temperatures and gradually move on to those requiring higher temperatures since the iron heats up much more quickly than it cools down.
4. Mixed Fiber Materials:
   • If the material is made up of more than one type of fiber, set the temperature to the fiber that requires less heat. For example, if the material is 70% synthetics and 30% cotton, set the temperature control to the position (°) for synthetic fabrics without steam.
5. Unknown Material Composition:
   • If you don’t know the composition of the article to be ironed, choose an inconspicuous part and do a test ironing to determine the appropriate temperature. Always start with a relatively low temperature and adjust until the ideal temperature is reached.
6. Ironing Pure Wool:
   • Pure (100%) wool articles can be ironed with the iron set to one of the steam positions. To prevent shine on pure wool, silk, and synthetic materials, iron them on the reverse side.
7. Preventing Shine on Materials:
   • For materials prone to becoming shiny, like velvet, cover them with a cloth and iron in one direction only, using light pressure. Keep the iron constantly moving over the fabric.

Note:

• The symbol on the label indicating “cannot be ironed” (e.g., chlorofibre, elastodiene) should be heeded and not ironed.

Steam Ironing Instructions

Temperature Preparation:

• Steam ironing is only possible at high temperatures.
• Ensure that there is enough water in the water tank.
• Rest the iron upright on the iron stand (I).
• Insert the plug into the wall socket.
• Position the temperature adjustment knob (K) on position **• or higher.
• When the temperature control lamp (J) turns off, move the steam adjustment selector (C) to the desired position. Maximum steam dispensing is achieved by moving the selector to the highest position. Steam is not dispensed when it is moved to ‘0″ (Fig. 2).
• Note: This model is equipped with a drip-proof system that automatically blocks water from going from the tank to the holes of the soleplate. The drip-proof system automatically cuts out the steam function if the iron’s temperature should be too low.

Shot of Steam:

• If there is water in the tank and the temperature is set on **••• or a higher level, press the steam button (E).

Spray Button:

• Make sure the steam adjustment selector is set on “0” and that there is water in the tank.
• Press the spray button (D).
• It may be necessary to press the spray button repeatedly to activate this function.

DRY IRONING:

• Insert the plug into the wall socket.
• Move the steam adjusting knob (C) onto “0′.
• Set the temperature control knob (K) according to the type of fabric to be ironed.
• Wait a few minutes for the soleplate to reach the set temperature.

VERTICAL IRONING:

• Set the iron temperature by turning the adjustment knob (K) past the symbol (***).
• Put the curtain or fabric in the position you want to iron vertically and press the steam button.
• If the temperature lamp is on, do not press the steam button more than three times in a row.
• Caution: Avoid ironing fabrics held by other people.

AFTER IRONING:

• Turn the temperature control knob (K) to “OFF”.
• Disconnect the plug from the wall socket.
• Put the iron in a vertical position and let it cool down.
• Empty the tank: open the water filling cover (B), turn the iron upside-down, and let the water pour out (Fig. 8).
• Let the iron cool down before emptying the tank to avoid potential hazards.
• Wrap the power cord around the iron without pulling it too tight (Fig. 6).
• Store the iron in a vertical position (Fig. 7).

CLEANING THE APPLIANCE

• Before cleaning, disconnect the plug from the power point and allow the iron to cool down.
• Never immerse the appliance in water or other liquids.
• Regularly check the state of the power cable, and if damaged, have it replaced by specialized personnel.

Self-Clean System:

• Fill the tank one-fourth full with water using the measuring cup (F) provided (Fig. 5).
• Set the iron on a stable surface in a vertical position on the iron stand ().
• Plug it into the socket. Ensure the steam adjustment selector is set on “0”.
• Position the temperature adjustment knob on “MAX”.
• Heat the iron until the lamp (J) turns off a second time.
• Position the temperature adjustment knob on “OFF”.
• Unplug the iron and keep it in a horizontal position on a sink.
• Press the self-clean button (L) and keep the iron horizontal. Steam and boiling water will remove lime deposits.
• Move the iron back and forth until the tank is empty.
• Put the steam adjustment selector back on minimum “0” after self-cleaning.
• Put the iron in a vertical position on its stand and wait for the soleplate to cool down completely.
• Ensure the soleplate is dry before storing the iron.
• Before use, test the iron on an old cloth to ensure the soleplate and tank are clean.

Cleaning the Soleplate and Shell:

• Warning: Do not use abrasives for cleaning the soleplate. Keep the soleplate smooth and avoid contact with metal objects.
• Remove deposits and residues on the soleplate with a rough cloth soaked in a vinegar water solution.
• Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry cloth.
• Failure to observe the rules above causes the warranty to be forfeited.

Contact Information

• Numero Unico: 199 202 250

Ariete – De’Longhi Appliances Srl Divisione Commerciale Ariete

• Address: Via San Quirico, 300, 50013 Campi Bisenzio (FI)
• E-Mail: info@ariete.net
• Internet: www.ariete.net

Frequently Asked Questions

Can children use the Ariete 6235 Steam Iron?

This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning its safe use. Always ensure children are supervised when using the iron.

Can the Ariete 6235 iron be used for commercial or industrial purposes?

No, the appliance has been designed for home use only and must not be used for commercial or industrial purposes.

How do I ensure the Ariete 6235 iron's safety when disposing of it?

It is suggested to cut off the power cord when disposing of the appliance and render potentially dangerous components harmless to prevent children from hurting themselves.

What should I do if the Ariete 6235 iron is damaged or the power cord is damaged?

Do not use the appliance if it is damaged or leaking. All repairs, including power cord replacement, must be done by an Authorized Service Centre or qualified personnel.

How do I clean the Ariete 6235?

Clean the appliance only with a soft, slightly damp cloth after unplugging and allowing all parts to cool down. Never use solvents that may damage plastic parts.

What is the self-clean system of Ariete 6235, and how do I use it?

The self-clean system helps remove lime deposits from the iron. Follow the provided instructions for self-cleaning.

What precautions should I take when using the Ariete 6235 iron for the first time?

It's normal for the iron to emit a little smoke when used for the first time due to lubricated components. This is not a cause for concern.

How do I select the desired ironing temperature in Ariete 6235?

Turn the temperature adjustment knob to the desired temperature, aligning it with the reference on the iron. The temperature control lamp will turn off when the iron reaches the selected temperature.

Can I dry Ariete 6235 iron with this appliance?

Yes, for dry ironing, insert the plug into the wall socket, move the steam adjusting knob to 0 set the temperature control knob, and wait for the soleplate to reach the desired temperature.

Can I use regular tap water in the Ariete 6235 iron?

Yes, you can use tap water, but if your tap water is very hard, it's recommended to use demineralized water to prevent the build-up of mineral deposits.

What do I do if the Ariete 6235 iron's soleplate becomes dirty or sticky?

Use a rough cloth soaked in a vinegar-water solution to remove deposits and residues from the soleplate. Avoid using abrasive materials or solvents.

Is it safe to leave the Ariete 6235 iron plugged in while not in use?

No, it's not recommended to leave the iron plugged in and unattended, even for a short period. Always turn it off, place it on its stand, and unplug the power cord when not in use.

Reference:Ariete 6235 Steam Iron User Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>