ASAHINA YD-1198 Hands Free Breast Pump S12 Updated Instructions
- June 2, 2024
- ASAHINA
Table of Contents
WEARABLE
BREAST PUMP
MODEL: YD-1198
YD-11988
User Manual
YD-1198 Hands Free Breast Pump S12 Updated
Thank you for buying our product. Please read this manual carefulluy before using and keep it for easily checking in the future. Wish you have a pleasant using experience with our smart electic breast pump.
Product Introduction
1.Specification
Product name: Wearable Breast Pump
Rated Voltage: DC 5V
Charging time: about 2 hours
Model: YD-1198
Rated Power: 5W.
Working time: about 120 minutes
Product Features
BPA-FREE Compatible Material
Pump and accessories are made by food-grade material
Anti-back flow protection design
Closed system to prevent breast milk from backing up to the pump, prevent
infection,and keep the milk fresh.
‘Smart Touch Screen Technology
Digital display features a memory fuction, and backiight for easy tracking and
recording pump sessions.
Portable and Easy to Clean
Compact design, only 5 parts, easy to carty.
Meet Different Needs
9 levels Stimulation Mode & 9 levels Expression Mode & 9 levels Mixed Mode.
Quiet and Lightweight
The quiet breast pump allows for discreet pumping anywhere. Light weight,
portable pump designed for moms on the go who pump several times a day.
Large Capacity Battery
Using large capacity rechargeable lithium battery, fully charged can be used
for 2 hours, no need to connect to AC power. Moms can enjoy pumping anywhere
at anytime.
Wearable & Pump Everywhere
No tube, No wire. tis so convenient that you can wear inside your nursing bra,
you can use it on the go and let your hands-free when you have to purp.
Accessory List
| Desc.| Material| Temp.| 1 PK
Qty| ,
2PK
Qty
---|---|---|---|---|---
A| Dust Cap| PP| -20 C-120 C| 1| 2
B| Connector| liquid silicone| -20 C -200 C| 1| 2
C| Pump Motor| /| /| 1| 2
D| Diaphragm| liquid silicone| -20 C -200 C| 1| 2
E| Silicone Stopper| silicone| -20 C -200 C| 2| 4
F| Charging Cable| /| /| 1| 2
G| Valve| liquid silicone| -20 C -200 C| 2| 4
H| Milk Collector Cup| pp| -20 C -120 C| 1| 2
I| Silicone Insert| liquid silicone| -20 C -200 C| 2| 2
J| Manual| /| /| 1| 1
Power in:110-240V 50-60Hz
Power Out: 5V 1A
Size: 120*80°148mm
Motor Weight: 317g
Mik Cup Capacity: 150m!
Battery Capacity and Type: 3.7V 1400mAh Li-ion
Cleaning Overview
Washing and sanitizing are two different activities. They must be done separately to protect you,your baby and the performance of your breast pump.
- Wash — To clean the surfaces of the parts by physically removing contamination.
- Sanitize — To kill living organisms, such as bacteria or viruses, that may be present on the surfaces of the parts.
-
Dry all the parts after wash or sanilize, Wash your hands and assemble the complete breast pump according to below pictures.
-
Insert the valve into the sificone connector.
-
Insert the silcone shieldinto the collector cup and make sure ts in right position.
-
Assembly the suction bow! lnto the milk collector cup:
-
Pross and rotato pump motor onto the collector cups in CW direction and make sure they ft at comect position.
-
Put the breast pump into the nursing bra and get a comfortable gusture, then start to pump.
-
Steps for Pouring Out the Mik
-
Rotate the pump in CCW drection and take it off.
“The pump unit can ot be (aid flatto avoid breast mik backfow. -
Insert the silicone stopper into the collector cup as ‘above picture shows.
-
Pouring the breast milkinto ‘milk botle in the indicatod direction as above picture shows.
Icon Display
Operation Instruction
- Power Button/Pause Button: Press 2 seconds to tum on or to turn off the breast pump.Tap the power button to pause the pumping when need.
- Mode Change: Tap the mode change button to change mode.
- Initial set-up: The initial stimulation mode will automatically change to expression mode after 2 minutes of use. Digitel display features a memory function for easy tracking When switched on, the pump’s memory wil automatically use the suction settings from the previous pumping session
- Suction Level: + suction increase – suction decrease (Stimulation Mode: L1-L9 Expression Mode: L1-L9 Mixed Mode: L1-L9)
- Battery Percent: Indicates remaining battery lfe. Please charge breast pump when low in battery.
- The pump will automatically switch off after 30 minutes use.
- Hold the breast shield and connector onto your breast with your thumb and index finger. Support your breast with palm of your hand.
- Tum on the brast pump by tapping the power button and choose the mode you prefer.
- Collecting the milk after expression. Or you can keep in in the refrigerator.
Tips
-
Your breast pump will begin in Stimulation Mode . Adjust the pumping level by using the controls to find a comfortable level.
-
Stimulation Mode: a fast pumping rhythm that mimics the baby’s natural sucking pattem to stimulate milk flow. After 2 minutes, your pump will automatically switch to expression mode.
If your milk begins to flow before 2 minutes, press the mode change button to manually switch to expression mode. -
Expression Mode: a slower pumping rhythm for gentle and efficient milk collection after milk has started flowing. Once you are pumping in the Expression Mode , increase the speedivacuum until pumping feels slightly uncomfortable(not painfu), then decrease sighly.
-
Mixed Mode: a mixed pumping hythm of stimulation mode and expression mode,which can stimulate the breast to produce more milk Adjust the pumping level sing the controls to find the maximur level of comfortable vacuum for you.
Long Storage
Your breast pump contains a rechargeable battery. To preserve your breast
pump, when rot n use for an extended amount of time, it wil automatically
transition into storage mode.
To remove from storage mode, plug your breast pump into an external power
source and fully charge the battery for up to 2 hours.
Before storing your breast pump for an extended amount of time remember to:
Clean breast pump kit| Cloan pump machine| Make sure breast pump battery is fully- charged
Trouble Shooting
Unable to start
- Make sure the power button be tapped for at least one second.
- Make sure the pump machine be fullly charged.
• Suction is insufficient
- Make sure all the parts are correctly screwed and assembled.
- Please check whether the valve is installed in place or not, ensure the silicone breast shield fits the breast closely and no air leakage.
- Adjust the “+ button of the control panel to increase the suction.
• Breast milk can’t be pumped out.
- Ensure all parts are installed in place and the suction is good, then release your body and try it again.
- Please use the hot towel to apply hot compress on your breast and do some massage, extruding breast by your hands and check if the milk flow fluently, 50 as to ensure the mammary gland is opening.
• Feeling pain when pumping the milk
- Please adjust the “* button on the control panel to reduce the pumping level to be comfortabe.
- Please use the hot towel to apply hot compress on breast and do massage with a lttle bit downward gesture, then do the pumping again.
Thanks for your using our products.
Sincerely hope our products and services will bring you and your family
convenience and happiness.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>