Ariete 6248 Stiratrice Verticale Garment Steamer User Manual
- June 1, 2024
- Ariete
Table of Contents
- 6248 Stiratrice Verticale Garment Steamer
- WITH REGARD TO THIS MANUAL
- INTENDED USE
- SAFETY WARNINGS
- SUGGESTIONS
- DESCRIPTION OF THE APPLIANCE
- INSTRUCTIONS FOR USE
- HOW TO USE THE ACCESSORIES
- AFTER USING THE DEVICE
- CLEANING AND MAINTENANCE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Garment steamer
6248 Stiratrice Verticale Garment
Steamer User Manual
6248
6248 Stiratrice Verticale Garment Steamer
WITH REGARD TO THIS MANUAL
This appliance is made in conformity with appropriate European Regulations in force, to protect the user wherever possible from potential hazards. Even if you are familiar with this type of appliance, carefully read this manual before use. Only use this appliance for the purpose it is designed for in order to prevent accidents and damage. Keep this manual close by for future consultation. If you should decide to give this appliance to other people, remember to also include these instructions.
The information provided in this manual is marked with the following symbols indicating:
Danger for children
Warning of burns
Danger due to electricity
Warning — material damage
Danger of damage originating from other causes
INTENDED USE
You can use the appliance to revive fabrics after they have been hanging or
closed for a long time. It is also possible to remove creases from delicate or
difficult to iron garments. It is recommended to use the appliance positioning
it on the ground on a horizontal surface.
The appliance has been designed for home use only and must not be used for
commercial or industrial purposes.
SAFETY WARNINGS
READ THESE INSTRUCTIONS CAREFULLY.
-
This appliance is intended to be used in household and similar applications. Any other use of the appliance is not intended by the Manufacturer who does not accept any responsibility for damages of any kind caused by improper use of the appliance itself. Improper use also results in any form of warranty being forfeited.
-
We decline any responsibility resulting from misuse or any use other than those covered in this booklet.
-
We suggest you keep the original box and packaging, as our free-of-charge service does not cover any damage resulting from inadequate packaging of the product when this is sent back to an Authorised Service Centre.
-
Using accessories not recommended or not supplied by the manufacturer of the appliance may entail risks of fire, electric shock or injuries to people.
Danger for children -
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance or its components. Cleaning and maintenance by the user must not be carried out by children without supervision.
-
The cleaning and maintenance must not be carried out by children under 8 years without supervision.
-
Always keep the appliance and the power cord out of the reach of children under the age of 8 years.
-
Do not leave the packaging near children because it is potentially dangerous.
-
In the event that this appliance is to be disposed of, it is suggested that the power cord is cut off. It is also recommended that all potentially dangerous components including the power cord are rendered harmless to prevent personal injury. Do not let children play with the appliance or its components.
Danger due to electricity -
Before plugging the appliance into the mains socket, ensure that the voltage shown on the rating plate matches the local voltage supply.
-
The use of extensions not approved by the manufacturer can result in damage to property and personal injury.
-
Always connect the appliance to an earthed socket.
-
Do not immerse the appliance in water or other liquids.
-
Do not use the appliance if your hands are wet or if you are barefoot.
-
Do not connect any other high-power equipment (stoves, irons, radiators, etc) to the same power outlet. Danger of electric overload.
Danger of damage originating from other causes -
Fill up the tank with water before starting up the appliance. Be sure to unplug the appliance before pouring water into the tank.
-
Turn on the appliance only when it is in working position.
-
Place the appliance on the ground on horizontal surfaces. Do not place the appli- ance on tables or mounts: danger of falling!
-
Do not move the appliance pulling it from the steam pipe.
-
Never leave the appliance unattended when it is connected to the power supply.
-
When you have to leave the appliance for a short time, always place the steam dispenser in its holder (B), always turn off the appliance and unplug the power cord from the mains supply.
-
The appliance is not to be used if it has been dropped, if there are visible sign of damage, faults or suspected defects after dropping or if it is leaking water. Immediately unplug it from the socket-outlet. Never operate the appliance if defective.
To prevent any accident, all repairs, including the replacement of the power cord, must be carried out by an Authorised Service Centre or by suitably qualified personnel. Otherwise, the warranty may be revoked.
Warning of burns -
Never try to use the appliance turned to yourself to iron the garments you wear.
-
Do not touch the metal parts of the appliance, the hot water or the steam when it is in operation and for several minutes after it is turned off since it could cause bums.
-
Do not leave the steam pipe on the ground or wrapped on itself when the appliance is on or immediately after it is turned off.
-
Do not remove the steam pipe when ironing. Danger of hot water leakage.
-
Bum Hazards – The appliance construction features, covered by this publication, do not allow to protect the user from possible contact with the steam pipe or the steam dispenser when the appliance is in use or in the minutes following its switching off. It is also advised to pay close attention during steam dispensing.
-
Do not point the steam dispenser towards body parts or pets.
-
During ironing operations put the nozzle on the support with the nozzles turned on the opposite side compared to the position of the folding rack.
-
After turning off the appliance and pulled the plug from the socket leave it on the ground.
-
Never direct the steam jet towards people, animals, plants or towards equipment containing electrical components (for example inside ovens).
Warning – material damage -
To move the appliance grasp the telescopic rod. Do not pull the steam pipe to move the appliance. If wheels should block, switch off the appliance and empty the water tank. Tilt the device to inspect the wheels.
-
Do not lift the appliance holding it by the telescopic rod or the steam pipe.
-
Fully unwind the cord before use.
-
The use of extensions not approved by the manufacturer can result in damage to property and personal injury.
-
Using the appliance with no water in the boiler may damage the pump. Check the water level in the tank on a regular basis.
-
Do not use sparkling (carbonated) water. If your water supply is very hard, we suggest you use demineralized water instead.
-
Do not pull the power cord to unplug the appliance.
-
The appliance must only be cleaned with a soft, slightly damped, cloth after unplugging the appliance and allowing all its parts to cool down. Never use solvents which may damage the plastic parts.
-
Do not pour vinegar, descales or other scented substances into the tank; Otherwise, the warranty may be revoked.
-
Before storing the appliance, turn it off by pressing the button (L). Always unplug the power cord from the mains supply. Wait until it has cooled down (30 minutes).
Fully empty the tank. -
Do not leave the appliance exposed to weathering ( rain, sun, etc.).
-
ALWAYS KEEP THESE INSTRUCTIONS.
SUGGESTIONS
This appliance is not designed to replace an iron. Before you start to use the
appliance check the instructions on the fabric label. If you are not aware of
the composition of the fabric of the garment to work, search for a point of
the fabric that is not visible. Make a test in this point.
Do not use the appliance on silk or velvet fabric. Some garments are ironed
well upside down or from the bottom upward.
If you iron in very low position, close to the floor, it is necessary to
occasionally raise the steam dispenser to allow the condensate to fall back
into the boiler.
If the nozzles begin to be clogged, you will hear a gurgling noise.
For harder and thicker garments it is necessary to move the steam dispenser
several times on them.
DESCRIPTION OF THE APPLIANCE
A – Steam nozzle | K – Handle |
---|---|
B – Dispenser support | L – Power switch with indicator light |
C – Telescopic rod | M – Steam adjustment knob |
D – Telescopic rod adjustment hook | N – Tank cap |
E – Power cord | O – Water tank |
F – Rod connection | P – Boiler drain cap |
G – Front swivel wheels | Q – Foldable hanger with garment pliers |
H – Base with boiler | R – Brush accessory and for trousers creases |
I – Steam pipe connection | S – Glove |
J – Steam pipe |
Technical and identification data
The plate below the base contains the following data:
- manufacturer and CE marking
- model (Mod.)
- serial number (SN)
- electrical supply voltage (V) and frequency (Hz)
- electrical power consumption (W)
- assistance toll-free phone number
When ordering at Authorized Service Centers, indicate the model and serial number.
INSTRUCTIONS FOR USE
Assembling
Warning!
Before using the appliance for the first time remove any labels and
protections from the dispenser support.
Remove the components from the box. Position the appliance on the ground on a
horizontal surface.
Open the rod adjustment hook (D) and extend the telescopic rod to the desired
level (Fig. 2).
Open the specific hook and insert the rod into the joint on the base (Fig. 3).
Close the hooks again to lock the rod into place.
Install the dispenser support (B) in the upper part of the rod (Fig. 4).
Connect the steam tube (J) to the base (Fig. 5). Screw the connection (F) in
the direction indicated by the arrow.
Position the steam dispenser on the support (Fig. 6).
Filling the tank before use
Warning!
Make sure the appliance is unplugged from the supply mains before filling the
tank with water.
Remove the tank (Fig. 7).
Turn the tank upside-down and remove the cap (N) (Fig. 8).
Fill the tank directly beneath the tap with cool tap water (Fig. 9).
NEVER fill the tank beyond the MAX level.
The product functions with normal tap water.
In the case of particularly calcareous waters (with hardness greater than
20°f) use a mixture composed of 50% of tap water and 50% of demineralized
water.
Never use pure demineralized water.
Do not add any additives or chemicals (such as for example, amides, starches,
perfume or other); Otherwise, the warranty may be revoked.
Warning!
Never use the appliance without water in the tank.
Put the tank back in, paying attention to match the tank valve with the pin in
the appliance seat (Fig. 10). Press the tank all the way down until it is
completely inserted and check that it is correctly installed.
Appliance switching on and use
Before plugging it in, completely unwind the power cord.
Insert the plug into a power outlet (Fig. 11).
Press the on/off button (Fig. 12). Make sure the button indicator light (L)
tums on. After about 45 seconds, steam will come out from the dispenser.
Place the garment on the specific hooks of the dispenser support (B).
Turn the steam adjustment knob (Fig. 13) to select the desired quantity of
steam.
The first time the appliance is switched on, it is possible to see a light
emission of smoke: This transitory effect is perfectly normal and will
disappear very soon.
Use the steam dispenser only performing vertical movements from the bottom
upwards and vice versa (Fig. 14).
Attention
Do not use the steam dispenser horizontally or upside down, with the nozzles
tumed down. Danger of hot water leakage from the nozzles.
Warning!
Position the steam dispenser on the dispenser support holding the nozzles
facing the opposite side to your body (Fig. 6). Risk of burns.
During use, the steam pipe and the steam dispenser reach high temperatures.
This is completely normal. Do not touch, risk of burns.
Do not use the appliance on fabrics that are supported by other people.
Filling the boiler during use
Always check the level of water in the tank while you are ironing.
Turn off the appliance by pressing the on/off button (L).
Unplug the power cord from the socket (Fig. 11).
Remove the tank (Fig. 7).
Turn the tank upside-down and remove the cap (N) (Fig. 8).
Add water directly from the tap (Fig. 9). NEVER exceed the MAX mark when
filling the tank.
Place the tank back on the appliance (Fig. 10), plug the cord in and turn on
the appliance again.
HOW TO USE THE ACCESSORIES
The appliance is provided with accessories: a brush accessory (R), which can
also be used to make hems and creases on trousers, a glove (S) and a foldable
hanger with pliers (Q) to hang clothes.
Warning!
Before proceeding with the accessories installation or removal, tum off the
appliance. Wait until the appliance has completely cooled.
Using the brush accessory
This accessory can be used as a lint brush, but also to make hems and creases
on trousers. Attach the steam dispenser accessory (Fig. 18). To make hems and
creases, press the lever of the accessory and place the edge of the trousers
inside. Release the lever and, when steam is being distributed, slowly pull
the dispenser to iron the cloth (Fig. 19).
Using the glove
This accessory allows you to keep a hand behind the garment that is being
ironed, to keep it taut without getting bumed.
Using the folding rack
Lift the vertical bars of the folding rack, until the horizontal bars are
aligned. Fit the horizontal bars in the seats located on the folding rack body
(Fig. 15). Remove the dispenser support from the rod. Insert the folding rack
in the rod (Fig. 16). Fit the dispenser support in the pin on the folding
rack.
AFTER USING THE DEVICE
Tum off the appliance by pressing the on/off button (L).
Remove the power cable from the socket-outlet.
Remove the tank from the base housing the boiler (Fig. 7).
Empty the water tank completely so as to prevent the water from stagnating,
which may form lime deposit (Fig. 20).
Allow the appliance to cool for at least 30 minutes.
Remove the steam tube (J). Close the telescopic rod (C).
Place the appliance horizontally and hold it above a sink. Unscrew the cap and
empty the boiler completely (Fig. 21).
Put the appliance in a dry place and away from the reach of children.
CLEANING AND MAINTENANCE
Warning!
Before cleaning or maintenance, always disconnect the plug from the mains
supply. Allow the appliance to cool for at least 30 minutes.
Cleaning the appliance
Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry
cloth. Do not use abrasive products to clean the device.
Tank cleaning
To clean the tank, insert fresh water, rinse and drain. Do not put vinegar,
decalcifying agents or other fragrant substance inside the tank; Otherwise,
the warranty may be revoked.
Emptying the boiler and cleaning it internally
Warning!
This operation shall be only carried out after the appliance has cooled down
completely.
Warning!
Do not put vinegar, decalcifying agents or other fragrant substances inside
the boiler; Otherwise, the warranty may be revoked.
Remove the tank (O) and empty it completely before emptying the boiler.
Place the appliance horizontally and hold it above a sink. Unscrew the cap and
empty the boiler completely (Fig. 21}. Fasten the cap back.
Pour a cup of tap water through the steam tube joint (|) into the boiler (Fig.
22).
Shake the appliance and empty it again, removing all water (Fig. 21). Repeat
this operation until the water coming out of the boiler is clean and clear.
Clean the boiler at least once a month, so as to remove any residue of lime
that could jeopardize proper operation of the appliance.
THE WARRANTY DOES NOT COVER DAMAGES DUE TO LIMESTONE OBSTRUCTIONS.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>