RAB HID-XX-E26-8XX-BYP-3SP LED Light Instruction Manual

: June 15, 2024
: RAB

Table of Contents

RAB HID-XX-E26-8XX-BYP-3SP LED Light
INSTRUCTIONS
WARNINGS
LAMP INSTALLATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RAB HID-XX-E26-8XX-BYP-3SP LED Light

INSTRUCTIONS

RAB L1ght1ng 1s committed to creating h1gh-qual1ty affordable well-designed and energy-efficient LED l1ght1ng and controls that make 1t easy for electricians to install and end users to save energy Wed love to hear your comments Please call the Marketing Department at 888-RAB-1000 or email market1ng@rabl1ghting.com

HID-XX-E26-8XX-BYP/3SP, HID-XX-EX39-8XX-BYP/3SP HID-XXX-EX39-8XX-BYP-PT, HID-XXX-EX39-8XX-BYP-PT-G2

Our sensor product numbers include MW-S/SMW-5, PIR-5/SPIR-S and DAYLIGHT-5 are optional accessories for select Post Top lamps. The lamps will perform as normal if no sensor is inserted. Please note that RAB lamps can’t operate with other brand sensors.

IMPORTANT

READ CAREFULLY BEFORE INSTALLING LED HID BULBS. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. RAB LED HID Bulbs must be wired in accordance with the National Electrical Code and all applicable codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

WARNINGS

Main applications include for use in post top, street lights and other suitable light fixtures.
Operating temperature:-30 °C to 60 °C (-22°F to 140 °F).
These LED Lamps require all ballasts, capacitors, and ignitors to be bypassed or removed. Do not operate lamps on existing ballasts.
Dimmable with optional control modules.
Do not use with standard dimmers. Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
This device is not intended for use with emergency exits.
Can be used in enclosed fixtures. DO NOT install 80W 1 00W 120W these lamps in horizontal applications.
Before installation make certain the AC power to the fixture is off.
Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for the installation of LED retrofit kit. Check for enclosed wiring and components.
Risk of fire or electric shock. LED Retrofit lamp installation requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Installers should not disconnect existing wires from lamp holder terminals to make new connections at lamp holder terminals. Instead, installers should cut existing lampholder leads away from the lampholder and make new electrical connections to lamp holder lead wires by employing applicable connectors.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.
Use only with a portable luminaire that is provided with a shade.
The added weight of the device may cause instability of a free-standing portable luminaire.
THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION.

LAMP INSTALLATION

Turn off the power before installation. Remove old ballast or disconnect from existing lamp holder. Shown as Figure 1. Remove and dispose of ballast in correct manner. (North America 100-277VAC)
Reconnect directly to the existing lamp holder. Shown as Figure 2. (North America 100-277VAC) Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
Install new LED replacement lamp. Shown as Figure 3. Please make sure the old fitting is correctly grounded. Attach retrofit label to luminaire. (North America 100-2771/AC)

Securely fasten the ground wire to the main body structure. If the wire is damaged in any way please replace it. (Do not use existing burnt-out wire). If needed, the replacement ground wire must be 1.0mm in size and insulateo from heat.

SAFETY CABLE INSTALLATION INSTRUCTION

You must use the safety cable to secure the lamps equal to or over BOW in case of fall down due to an old socket.