BEGA 85025K3 3000 K Building Light Instruction Manual

: June 15, 2024
: BEGA

Table of Contents

BEGA 85025K3 3000 K Building Light
Product Information
Specifications
Product Usage Instructions
DIMENSIONS
Instructions for use
Product Description
Lamp
Installation
Cleaning and Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85025K3 3000 K Building Light

Product Information

This product is a system light building element with shielded light for illuminating and designing squares. It is made of cast aluminum with a clear synthetic cover with an optical structure. The luminaire has a silicone gasket and a reflector surface made of pure aluminum. It operates on an LED power supply unit with a voltage of 220-240 V and frequency of 50-60 Hz, with a DC voltage range of 176-264 V. The luminaire is DALI controllable with 1 DALI address. It has a safety class I and protection class IP 65, making it dust- tight and protected against water jets. The impact strength is IK04, protecting against mechanical damage. The product weighs 5.6 kg.

Specifications

Material: Cast aluminum
Cover: Clear synthetic with optical structure
Power supply: LED power supply unit
Voltage: 220-240 V
Frequency: 50-60 Hz
DC Voltage Range: 176-264 V
DALI Controllable: Yes
DALI Addresses: 1
Safety Class: I
Protection Class: IP 65
Impact Strength: IK04
Weight: 5.6 kg

Product Usage Instructions

Installation
The installation of this luminaire must be carried out by a qualified electrician in compliance with national safety regulations. The luminaire requires a light-building element tube for installation, which must be ordered separately. The tube is not included with the luminaire. Ensure that the power cable and control cables are properly connected. For additional protection against overvoltage and transients, separate overvoltage protection components are recommended.

Usage
To use the luminaire, connect it to a suitable power source within the specified voltage range. The luminaire is DALI controllable, allowing for remote control and dimming of the light output The light is directed evenly and efficiently onto the surface to be illuminated, with no light emitted into the upper half-space of the luminaire. The luminaire is designed to be dust- tight and protected against water jets, making it suitable for outdoor use. It is also resistant to mechanical damage with an impact strength of IK04.

FAQ

Q: Can I install this luminaire myself?
A: No, the installation of this luminaire must be carried out by a qualified electrician.
Q: Is the light output dimmable?
A: Yes, the luminaire is DALI controllable, allowing for remote control and dimming of the light output.
Q: Can this luminaire be used outdoors?
A: Yes, the luminaire is designed to be dust-tight and protected against water jets, making it suitable for outdoor use.

Light building element

DIMENSIONS

$BEGA-85025K3-3000-K-Building-Light-fig- $2$$

Instructions for use

Application

System light building element with shielded light for illuminating and designing squares, driveways, and entrance areas.
Light exit 360°. The light is deflected using a conical reflector onto the surface to be illuminated.
A light-building element tube is required for the installation of the light-building element head, which must be ordered separately (see accessories).

Product Description

Luminaire made of cast aluminium, aluminum, and stainless steel
BEGA Unidure® coating technology Clear synthetic cover with optical structure Silicone gasket
Reflector surface made of pure aluminium Connecting cable X05BQ-F 5 G 1 mm² Cable length 4 m
BEGA Ultimate Driver® LED power supply unit 220-240 V x 0/50-60 Hz DC 176-264 V
DALI controllable Number of DALI addresses: 1
Basic isolation exists between the power cable and control line BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK04
Protection against mechanical impacts < 0.5 joule
Conformity mark
Horizontal wind-catching area: 0.043 m²
Weight: 5.6 kg
This product contains light sources of energy efficiency class(es) C, D

Dark Sky
The light of this luminaire is directed evenly and highly efficiently onto the surface to be illuminated. No light is emitted into the upper half-space of the luminaire.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.

You can find them on our website at www.bega.com.

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp

Module connected wattage 28 W
Luminaire connected wattage 30 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 60 °C

85 025 K3

Module designation 4x LED-1313/830
Color temperature 3000 K
Color rendering index CRI > 80
Module luminous flux 4640 lm
Luminaire luminous flux 3451 lm
Luminaire luminous efficiency 115 lm / W

85 025 K4

Module designation 4x LED-1313/840
Color temperature 4000 K
Color rendering index CRI > 80
Module luminous flux 4860 lm
Luminaire luminous flux 3615 lm
Luminaire luminous efficiency 120,5 lm / W

Installation

Thread the connection cable into the light-building element tube. Align the light building element head and secure it in place.
Tighten the lateral hexagon socket screws (wrench size 5 mm).
- Torque = 16 Nm
Open the connection box.
Lead the luminaire wiring and mains supply cable through the cable entry into the connection box.
Note the correct configuration of the main supply cable. Make mains supply connections at the brown (L), blue (N), and green-yellow lead (1).
The connection of the control cables is achieved using both leads marked with DALI.
In case these leads are not used the luminaire will be operated at full light output.
Close the connection box.

Cleaning and Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high-pressure cleaners.

Please note:
Do not remove the desiccant bag from the luminaire housing. It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
The defective synthetic diffuser must be replaced.
Close the luminaire.

Accessories

The light-building element head can be combined with the following light- building element tubes:

Cylindrical aluminum light building element tube, lacquered, complete with door and connection box 71 084
- 84 712 with anchorage unit H 3900 mm
- 84 713 with base plate H 3900 mm
Cylindrical aluminum light building element tube, lacquered, with door, connection box
- 71 084 and integrated adjustable floodlight
- 84 714 with anchorage unit H 3900 mm
- 84 715 with base plate H 3900 mm
Cylindrical aluminum light building element tube, lacquered, with door, connection box
- 71 084 and 2 integrated adjustable floodlights
- 84 716 with anchorage unit H 3900 mm
- 84 717 with base plate H 3900 mm
Cylindrical laminated wood and aluminium light building element tube, with door and connection box 71 084
- 84 718 with anchorage unit H 3900 mm
- 84 719 with base plate H 3900 mm 70 899 Anchorage unit for light building element tube with base plate