Ferono FSS630 FSS Axial Fans Installation Guide
- June 6, 2024
- Ferono
Table of Contents
Ferono FSS630 FSS Axial Fans
Installation and importance
- When installing and caring, be careful not deform to the impeller. If the blades are deformed,it will be unbalanced and cause noise and vibration.
- Fans can be mounted to a window, ceiling, or wall, The fan is intended for mounting in outside windows or walls. Install the fan on a solid surface, like a wall column or other solid wood.
- Precautions must be taken to avoid the back-flow of gases into the room from the open flue of gas or other fuel-burning appliances.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Caution on installation
Do not install in the following areas:
- A place of frequent vibration or where vibration easily occurs. (Installation has to be a sound place where there is no vibration.)
- A place where the temperature is too low and high.
- A place where there is corrosive gas or use of chemical products.
- A place where there is an explosive duct or gas or where it may occur.
- A place where there is significant humidity over 90% of humidity.
Installation
- When installing and carrying, be careful not to deform to the impeller. If the blades are deformed, they will be unbalanced and cause noise and vibration.
- The fan can be mounted to a floor, ceiling, or wall. Install the fan on a solid surface, like a wall column or other solid wood. Do not install it on an unstable surface like sheetrock.
Drawing and dimensions
Model| A
(mm)
| B
(mm)
| C
(mm)
| D
(mm)
| E
(mm)
| F
(mm)
| G
(mm)
---|---|---|---|---|---|---|---
FSS250| 92| 250| 270| 70| 95| 4| 320
FST250| 92| 250| 270| 70| 95| 4| 320
FSS300| 92| 300| 320| 80| 116| 4| 360
FST300| 92| 300| 320| 80| 116| 4| 360
FSS350| 102| 350| 370| 80| 130| 6| 422
FST350| 102| 350| 370| 80| 130| 6| 460
FSS400| 102| 400| 420| 90| 135| 6| 470
FST400| 102| 400| 420| 90| 135| 6| 500
FSS450| 102| 450| 470| 90| 147| 6| 522
FST450| 102| 450| 470| 90| 147| 6| 540
FSS500| 138| 500| 520| 90| 158| 6| 570
FST500| 138| 500| 520| 90| 158| 6| 570
FSS550| 136| 550| 570| 100| 160| 6| 675
FST550| 138| 550| 570| 100| 173| 6| 622
FSS630| 136| 630| 650| 100| 185| 7,8| 775
FST630| 138| 630| 650| 100| 193| 7,8| 750
Wiring diagram
Maintenance
- Before cleaning the fan, disconnect the power cord.
- Make periodic cleaning on ring & fan impeller.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>