alula M2M Bat Mini Communicator Installation Guide

alula M2M Bat Mini Communicator

Scan QR for most up to date manual, features, and compatibility Alarm Panel Compatibility Guide alula.com/communicators/bat- mini

Product Information

BAT-Mini is a device that connects to security panels to deliver central station monitoring, interactive services, and remote panel configuration.

Features

•  5G CAT-M1 cellular communicator
• Dual SIM: AT&T and Verizon
• Wi-Fi broadband
• Dial Capture interface, supporting Ademco Contact ID
• Key bus integration with selected panels
• Key switch with Arm/Disarm status via 1/Os
• Supply Voltage: +10 to + 17 VDC
• Power Consumption: Nominal 15 mA, Peak 200 mA
• Compact Dimensions: 5.125 ” x 3.625″ x 1″
• Weight: 3.75 oz

Warnings

1. The wiring should be done only when the panel and the communicator are disconnected from power!
2. PRIMARY USE ONLY – NOT TO BE USED WITH LANDLINE!
3. Having a phone line connected will damage the unit!
4. Connect + and – of the communicator to a max of 12V – 15V DC power supply.
5. WARNING: USB PORT TO BE USED WITH M2M/ALULA ADD-ON MODULES ONLY.

Become an M2M/Alula dealer
If you are not a registered M2M/Alula dealer, please visit www.alula.com/pro- signup to register, or call 1.888.88.ALULA

Create the Account

1. Create customer account on www.alulaconnect.com and enter your customer’s required information such as username, password, etc.
2. Register hardware by entering the MAC ID and CRC found on the inside and back cover of BAT-Mini and configure device information
3. Set customer notification preferences
4. Add Central Station connection type, Caller ID number and account number

Configure the Alarm Panel

Refer to the panel’s installation manual to configure the following options:

• Enable the PSTN dialer of the panel
• Select DTMF mode (Tone Dialing)
• Select Contact ID Full communication format
• Enter a telephone number for dialing (you can use any number, e.g. 9999999)
• Enter a 4-digit account number in the panel

Find configuration guides for popular panels at alula.com/communicators/bat- mini/
Remote Arming/Disarming via Key bus for supported Honeywell, DSC, Napco and Interlogix Alarm Panels (Optional)
Panel compatibility list for Key bus integration is available at alula.com/communicators/bat-mini Wire the device to the panel according to the Key bus wiring diagram (Page 2)

• Honeywell panels ONLY: Program an alpha keypad address on the panel for each partition in use, starting from address 21 to 28 (21 for partition 1, 22 for partition 2, etc.)
• The addresses should be reserved for the M2M/Alula communicator use only
• Once the panel and BAT-Mini are online, navigate to the Communications tab of AlulaConnect enter the nanel’s installer code and initiate Device Action > Svnc. Panel Data
• Napco panels ONLY: Program a Wizard keypad address on the panel for each partition in use, starting from keypad 2 (21 for partition 1, 22 for partition 2, etc.).
• The address should be reserved for the M2M/Alula communicator only
• Having a physical keypad on the first address is mandatory

Remote Arming/Disarming via Key switch (Optional)

• Configure a zone as a momentary key switch (refer to the panel’s installation manual).
• Configure a PGM output of the panel to activate (switch to ground), when the panel is armed, and to deactivate, when disarmed (refer to the panel’s installation manual
• Wire the device to the panel according to the keyswitch wiring diagram (Page 2)
• For panels that don’t have a status PGM, the status can be received through the OPEN/CLOSE reporting

Guidelines for configuring the key switch and the output for popular panels are available at alula.com/communicators/bat- mini/

Initial pairing prodecure for Remote Arming/Disarming via Keyswitch:

• Enable Open/Close reporting (at least during the initial pairing procedure).
• Log in to the Alula App and press Sync with Panel
• Ask the end user to enter a Remote PIN code of his/her choice.
• Disarm (or Arm) from the keypad within 2 minutes to complete the pairing

Wiring the Communicator to the Alarm Panel

12-15VDCPower +
Supply Ground GND
RING RING
TIP TIP

*Key bus Wiring
Honeywell Vista and DSC Power Series Panels**

Green (Data IN) G / IN
Yellow (Data Out) Y / IN

Napco Panels
RX (Yellow) G / IN
TX (Green) Y/ IN ****

Interlogix NX Panels
DATA G/IN
DATA Y/IN

*Key switch Wiring
** Armed Status Output G/IN
Key switch Zone Y / IN

• Optional – wire only if interactive features will be used. Panel compatibility list is available at alula.com/communicators/bat-mini/

LED Indicators

• Slow flashing – trying to establish connection
• Constantly On – connection established at good signal level
• Constantly On, blinking every 5 sec. – connection established at low signal level
• Fast flashing – transferring data

Troubleshooting the DTMF Communication
If you have issues receiving the events, try the following additional panel settings:

• Disable “Telephone line monitoring”
• Disable “Wait for dial tone” option
• Use “A” instead of “0” in the account number
• If there is more than one partition, enter an account number for each partition

For certain panels, you might need to also specify an account number for the main partition 0 (sometimes referred as system account number)

Specifications

• Model: DRAFT DRAFT
• Product Code: &&’
• Weight: $7+0LQL
• Dimensions: – ./00123456/7-

Product Usage Instructions

Safety Precautions
Before using the product, please read and follow these safety precautions:

• Ensure the product is placed on a stable surface.
• Avoid exposing the product to extreme temperatures or direct sunlight.
• Keep the product away from water and other liquids.
• Do not disassemble or attempt to repair the product yourself. Contact customer support for assistance.

Assembly
To assemble the product, follow these steps:

1. Remove all packaging materials.
2. Place the main body of the product on a flat surface.
3. Attach any additional components according to the provided instructions.
4. Ensure all connections are secure before proceeding.

Operation
To operate the product, follow these steps:

1. Connect the power cable to a power source.
2. Press the power button to turn on the product.
3. Use the provided remote control or buttons on the product to navigate through the menu options.
4. Refer to the user manual for specific instructions on using different features and settings.

Maintenance
To maintain the product and ensure its longevity, follow these guidelines:

• Regularly clean the product with a soft, dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.
• Keep the product away from excessive heat or humidity.
• Check for any loose connections or damaged parts and contact customer support for assistance if needed.

TRADEMARKS
Alula is a trademark owned by Alula Holdings, LLC. Alula products will function with one of either Honeywell or DSC systems. However, no Alula product is produced by, endorsed by, nor is officially associated with Honeywell or DSC. Alula recommends verifying proper enrollment and operation, per control panel installation instructions, at installation.
AT&T is a trademark of AT&T Intellectual Property II, L.P. Verizon is a trademark of Verizon Trademark Services LLC. Honeywell is a registered trademark owned by Honeywell International Inc. DSC is a registered trademark owned by TYCO
Google Play is a trademark owned by Google LLC.

IC NOTICE
This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC NOTICE

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may be received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Alula could void the user’s authority to operate this equipment.

RF Exposure:
To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended.

Frequently Asked Questions (FAQ)

1. Q1: How do I reset the product to its factory settings?
   To reset the product to its factory settings, follow these steps:
   Go to the Settings menu.
   Select the “Reset” option.
   Confirm the reset process by following the on-screen prompts.

2. Q2: Can I use the product with other devices?
   Yes, the product can be used with other devices such as smartphones, tablets, and computers. Refer to the user manual for instructions on how to establish a connection.

3. Q3: What should I do if the product stops working?
   If the product stops working, try the following troubleshooting steps:
   Check if the power cable is properly connected.
   Ensure the power source is functioning.
   Try resetting the product to its factory settings (refer to the user manual).
   If none of the above steps resolve the issue, contact customer support for further assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>