alula BAT Mini Universal Communicator 5G Ready Bat Connect Instruction Manual
- June 1, 2024
- alula
Table of Contents
alula BAT Mini Universal Communicator 5G Ready Bat Connect
Product Information
Specifications
- Product Name : BAT-MiniTM
- Compatibility: Honeywell Vista 15P & 20P, DSC 1616/1832/1864, Interlogix NX, Napco GEM 1632
- Interface: RS485 Communication
- Power Input : 12V DC
- Connection : Phone Line Interface
Product Usage Instructions
Honeywell Vista 15P & 20P
To enable Contact ID Reporting:
- Enter the programming menu by typing 4112,8,00
- Configure settings as needed using the provided keypad entry actions
- Verify proper enrollment and operation using your control panel’s installation manual
DSC 1616 / 1832 / 1864
To enable Contact ID Reporting:
- Follow similar steps as outlined for the Honeywell Vista systems
- Verify proper enrollment and operation using your control panel’s installation manual
Interlogix NX
To enable Contact ID Reporting:
- Follow similar steps as outlined for the Honeywell Vista systems
- Verify proper enrollment and operation using your control panel’s installation manual
Napco GEM 1632
To enable Contact ID Reporting:
- Follow similar steps as outlined for the Honeywell Vista systems
- Verify proper enrollment and operation using your control panel’s installation manual
FAQ
- How do I know if the BAT-Mini is properly connected to my control panel?
- To verify proper connection, check the enrollment status on your control panel according to the installation manual provided. Ensure that the wiring is correctly set up based on the wiring and programming guide.
- Can I use the BAT-Mini with other control panels not listed in the manual?
- The BAT-Mini is specifically designed for compatibility with the listed control panels. It is recommended to use it with the supported models for optimal performance.
- What should I do if I encounter issues during programming?
- If you encounter any difficulties during programming, refer to the wiring and programming guide for troubleshooting tips. You can also reach out to technical support for further assistance.
Program the panel for Full Interactive control with BAT-Mini.
- The installer code provided is the default. This code may vary by installation.
- Power down the system and proceed to wiring
Enable Contact ID Reporting:
Optional: Programming an Alpha Keypad Address for Keybus
- Power up the panel
- In AlulaConnect, enter the Honeywell Installer Code. Saving the installer code will automatically run a Panel Sync.
- anel Sync synchronizes panel programming with the BAT-Mini
Verify proper enrollment and operation using your control panel’s installation manual.
DSC 1616 / 1832 / 1864
Program the panel for Full Interactive control with BAT-Mini.
- The installer code provided is the default. This code may vary by installation.
- Power down the system and proceed to the wiring
Enable Contact ID Reporting
- Power up the system.
- In AlulaConnect run a Panel Sync command to synchronize panel programming with the BAT-Mini.
Interlogix NX
Program the panel for Full Interactive control with BAT-Mini.
- The installer code provided is the default. This code may vary by installation.
- If Quick Arm is enabled, Arming Events are reported as user 0.
- Power down the system and proceed to wiring
Enable Contact ID Reporting:
- Power up the system
- In AlulaConnect run a Panel Sync command to synchronize panel programming with the BAT-Mini.
Program the panel for Full Interactive control with BAT-Mini.
- The installer code provided is the default. This code may vary by installation.
- Power down the system and proceed to the wiring
Enable Contact ID Reporting:
- Power up the system
- In AlulaConnect run a Panel Sync command to synchronize panel programming with the BAT-Mini.
REV A • 2024-02-08
Tech Support Line
- (888) 88-ALULA
- 888-882-5852
- alula.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>