alula RE603P Panic Pendant Owner’s Manual
- June 1, 2024
- alula
Table of Contents
alula RE603P Panic Pendant
The Alula Panic Pendant is a wearable wireless panic device that utilizes three sensor IDs for versatile applications. The Panic Pendant features multiple mounting and wearable options, including a wristband design that is compatible with Apple Watch™ bands.
Features
- Large, single-button design for simple operation
- Sensor IDs for single, double-press, and press-and-hold
- Includes wristband, lanyard, belt clip, and surface mount
- 5-year warranty
Enrol by placing the panel into wireless enrollment mode and sending an enrollment signal from the wireless panic. Alternatively, the panic sensor can be enrolled by entering one, or multiple of its 8-character serial numbers on the AlulaConnect web portal.
Sending an Enrollment Signal
- Single press, double-press, or press-and-hold depending on the desired sensor ID
- See the Specifications table for button press details
Component Identification
Pro Tip:
Users can personalize their Panic Button with Apple Watch® compatible
wristbands (38/40/41mm)
Wearable/Mounting Options
- On a wrist using a compatible wristband (the colour of the included wristband may vary).
- Around the neck as a pendant using the included pendant inserts and snap-closure adjustable-length rope necklace (color may vary).
- Worn on a belt with the surface mount bracket plus belt clip.
- Mounted to a flat surface with the surface mount bracket and screws.
Product Configuration
When enrolling the device, it is recommended to name each zone ID for easy identification and assignment to the intended action or scene.
Example:
- Zone 1 = “PB1 SP”(Panic Button #1 Single Press)
- Zone 2 = “PB1 DP”(Panic Button #1 Double Press)
- Zone 3 = “PB1 PH”(Panic Button #1 Press and Hold).
Important Notes
- If only one zone ID is enrolled, all three press methods will trigger the panel.
- If more than one zone ID is enrolled, only those press methods will trigger the Panel.
- After the zone is recognized by the panel, be sure to assign a zone type that is“chime only”. Otherwise, the zone will be treated like a Door/Window open and restore and may trigger an alarm.
Wearable Operation
If the Panic Button will be used as a “wearable device”, supervisory should be
disabled on the panel as the wearer may leave the premises. Use the panel
installation guide to verify the proper system configuration.
Specifications
Button Press Options
Single Press
Double Press Press and Hold
| Press and release once
(LED will blink once and stay illuminated for 4 seconds)
Press and release twice, <1 second apart
(LED will blink twice and stay illuminated for 4 seconds)
Press and Hold until LED illuminates (about 5 seconds), then release
(LED will blink three times and stay illuminated for 4 seconds)
Physical
Housing Dimensions Weight with Battery Wearable/Mounting| 1.5 x 1.25 x 0.4
inches (39 x 32.5 x 10 mm)
0.4 ounces (12 grams)
Wrist band, Necklace, Belt Clip, Surface Mount, Screws (provided)
Environmental
Operating Temperature Maximum Humidity| 32 to 110 °F (0 to 43 °C)
95% non-condensing relative humidity
Sensor Specifications
Frequency Replacement Battery Nominal Battery Life Battery Voltage Transmitted
Indications| 433.92 MHz
One Lithium CR2032 4 years
3.0 VDC (Nominal), 2.2 VDC (Low) Low Battery, Supervision
__Specifications subject to change without notice
WARRANTY FCC NOTICE
Alula will replace products that are defective in their first five (5) This device complies with Part 15 of the FCC rules. Operation is years. subject to the following two conditions:
TRADEMARKS (1) This device may not cause harmful interference.
Alula is a trademark owned by Alula Holdings, LLC. (2) This device must accept any interference that may be received,
Ecolink is a trademark owned by Ecolink Intelligent Technology Inc. including interference that may cause undesired operation.
RE603P Designed and manufactured by Ecolink Intelligent Changes or modifications not expressly approved by Alula could void
Technology Inc. 2023. the user’s authority to operate this equipment.
© 2023 Ecolink FCC ID: XQC-WST130
Apple Watch is a registered trademark of Apple Inc.
All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this document are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.
IC NOTICE
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux cnr d’Industrie Canada
47-00038 • REV A • 2023-09-28
Tech Support Line • (888) 88-ALULA • 888-882-5852
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>