CHAUVET DJ 4BAR-LTBT-ILS LED Lighting System User Guide
- June 15, 2024
- Chauvet DJ
Table of Contents
CHAUVET DJ 4BAR-LTBT-ILS LED Lighting System
Product Information
Specifications
- Product Name: 4BAR LTBT ILS
- Language: English, Spanish, German, Italian, Dutch
- FCC Compliance: Part 15 Part B
- Connection: DMX data connection and D-Fi USB
Safety Notes
- Always connect to a grounded circuit.
- Connect to operating voltages as specified on the product’s spec sticker.
- Disconnect from power before replacing the fuse.
- Disconnect from its power source during periods of inactivity.
- Use a safety cable when suspending overhead.
- Heed all restrictions and warnings on the spec sticker.
- Mount in a location with at least 20 in (50 cm) of ventilation.
- Replace the fuse with the same type and rating.
- In the event of a serious operating problem, stop using immediately.
- Do not expose the product to moisture, extreme temperatures, or shock.
FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
What is Included
- 4BAR LTBT ILS
- Power cable
- Carrying bag
- Tripod
- Footswitch
- Hanging brackets
- Quick Reference Guide
Control Panel Description
| Button | Function |
|---|---|
| Exits | Exits from the current menu or function |
| Navigate Up | Navigates upwards through the menu list and increases the |
numeric value when in a function
Navigate Down| Navigates downwards through the menu list and decreases the
numeric value when in a function
Enable| Enables the currently displayed menu or sets the currently
selected value into the selected function
ILS Connection
The 4BAR LTBT ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending). For more information about configuring the 4BAR LTBT ILS into ILS mode, please refer to the User Manual available at www.chauvetdj.com.
Product Usage Instructions
Safety Precautions
- Always connect the product to a grounded circuit.
- Ensure that the operating voltages are within the specified range mentioned on the product’s spec sticker.
- Before replacing the fuse, disconnect the product from power.
- During periods of inactivity, disconnect the product from its power source.
- When suspending the product overhead, use a safety cable to secure it.
- Read and follow all restrictions and warnings mentioned on the spec sticker.
- Mount the product in a location with at least 20 inches (50 cm) of ventilation.
- Only replace the fuse with the same type and rating.
- If you encounter a serious operating problem, stop using the product immediately.
- Avoid exposing the product to moisture, extreme temperatures, or shock.
FCC Compliance
This device complies with Part 15 Part B of the FCC rules. To ensure proper operation and compliance, follow these guidelines:
- The device should not cause harmful interference to other electronic devices.
- The device must accept any interference received, including interference that may cause undesired operation.
- Do not make any changes or modifications to the product that are not approved by the responsible party as it may void your authority to operate the equipment.
Facility
Follow these steps to install the 4BAR LTBT ILS:
- Ensure that the product is connected to a grounded circuit.
- Check the operating voltages specified on the product’s spec sticker and connect accordingly.
- Before replacing the fuse, disconnect the product from power.
- If the product will not be used for an extended period, disconnect it from its power source.
- If suspending the product overhead, use a safety cable to secure it.
- Ensure that the product is mounted in a location with at least 20 inches (50 cm) of ventilation.
Operation
Follow these steps to operate the 4BAR LTBT ILS:
- Use the control panel buttons to navigate through the menu and adjust settings.
- Press the “Exits” button to exit from the current menu or function.
- Press the “Navigate Up” button to move upwards through the menu list and increase numeric values when in a function.
- Press the “Navigate Down” button to move downwards through the menu list and decrease numeric values when in a function.
- Press the “Enable” button to enable the currently displayed menu or set the currently selected value into the selected function.
ILS Connection
The 4BAR LTBT ILS can be connected to the Integrated Lighting System (ILS) ecosystem using the DMX data connection and D-Fi USB. To configure the product into ILS mode, please refer to the User Manual available at www.chauvetdj.com.
FAQ
Q: How do I replace the fuse?
A: To replace the fuse, follow these steps:
- Disconnect the product from power.
- Locate the fuse on the product.
- Remove the old fuse.
- Insert a new fuse of the same type and rating.
- Reconnect the product to power.
Q: What should I do if I encounter a serious operating problem?
A: If you encounter a serious operating problem, stop using theproduct immediately and contact our customer support forassistance.
Q: Can I make modifications to the product?
A: No, any changes or modifications not expressly approved by the responsible party may void your authority to operate the equipment.
Safety Notes
These Safety Notes include important information about installation, use, and
maintenance of 4BAR LTBT ILS.
- ALWAYS :
- Connect to a grounded circuit.
- Connect to operating voltages as specified on the product’s spec sticker.
- Disconnect from power before replacing the fuse.
- Disconnect from its power source during periods of inactivity.
- Use a safety cable when suspending overhead.
- Heed all restrictions and warnings on the spec sticker.
- Mount in a location with at least 20 in (50 cm) of ventilation.
- Replace the fuse with the same type and rating.
- In the event of a serious operating problem, stop using immediately.
- DO NOT:
- Open this product or attempt any repairs. It contains no user-serviceable parts.
- Look at the light source when the product is on.
- Use if the power cord is crimped or damaged.
- Disconnect by pulling on the power cord.
- Allow flammable materials close to the product when it is operating.
- Touch the housing when it is on.
- Block any ventilation holes/slots in the housing.
- Connect to a dimmer or rheostat.
- Carry the product by its power cord.
- Operate in temperatures higher than 104°F (40°C).
- Expose to environments that exceed the Ingress Protection (IP) rating.
- Expose to rain or moisture.
- Use outdoors.
- Submerge.
- Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation, or shock.
FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
What is Included
- 4BAR LTBT ILS
- Power cable
- Carrying bag
- Tripod
- Footswitch
- Hanging brackets
- Quick Reference Guide
Control Panel Description
| Button | Function |
|---|---|
| < MENU> | Exits from the current menu or function |
| < UP> | Navigates upwards through the menu list and increases the numeric |
value when in a function
< DOWN>| Navigates downwards through the menu list and decreases the
numeric value when in a function
< ENTER>| Enables the currently displayed menu or sets the currently
selected value into the selected function
ILS Connection
The 4BAR LTBT ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending). For more information about configuring the 4BAR LTBT ILS into ILS mode, please refer to the User Manual available at www.chauvetdj.com
Scan the QR code to maranty terms, and age, complete User Manual
CONTACTS
General Information / Technical Support
- Chauvet World Headquarters
- Address: 3360 Davie Rd. Davie, FL 33314
- Voice: 954-577-4455
- Fax: 954-929-5560
- Toll-Free : (900) 762.1094
- Voice: 844-393-7575
- Fax: 954-756-8015
- Email: chauvetcs@chauvetlighting.com
- Website : www.chauvetdi.com
- Chauvet U.K.
- Address: Pod 1 EVO Park Little Oak Drive, Sherwood Park Nottinghamshire, NG15 0EB UK
- Voice : +44 (0) 1773 511115
- Fax: +44 (0) 1773 511110
- Chauvet Benelux
- Address : Stokstraat 18 9770 Kruishoutem Belgium
- Unino: +29 0 299 02 07
- Email : BNLtech@chauvetlighting.eu
- Website: www.chauvetdi.eu
- Chauvet France
- Address : 3, Rue Ampère 91380 Chilly-Mazarin France
- Voice : +33 1 78 85 33 59
- Email: ERtech@chauvetlighting.fr
- Website : www.chauvetdj.eu
- Chauvet Germany
- Address : Bruno-Bürgel-Str. 11 28759 Bremen Germany
- Voice: +49 421 62 60 20
- Email: DEtech@chauvetlighting.de
- Website : www.chauvetdi.eu
- Chauvet Mexico
- Address: Av. de las Partidas 34 – 3B (Entrance by Calle 2) Zona Industrial Lerma Lerma, Edo. de México, CP 52000
- Voice : +52 728-690-2010
- Email: servicio@chauvet.com.mx
- Website : www.chauvetdj.mx
Visit the applicable website above to verify our contact information and
instructions to request support. Outside the U.S., IK Troland Maxien Franca
Carmanut ArRanalin contart the donor of card
© Copyright 2023 Chauvet
All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>