Creatuis 9210-N Elderly Massage and Heat Large Lift Recliner Chair User Manual

: June 14, 2024
: Creatuis

Table of Contents

Creatuis 9210-N Elderly Massage and Heat Large Lift Recliner Chair
Specifications
introduction
General warnings
Speciﬁc Warnings
Remote control

Creatuis 9210-N Elderly Massage and Heat Large Lift Recliner Chair

Specifications

Electronic components (motor/transformer/controllers) warranty:1 year
Cover (fabric/PU/PVC/combined fabric/leather/etc) warranty: 2 years
Reclining mechanism warranty: 3 years

chair series-9210-N

We hope this chair brings convenience and comfort to your daily life. If you have any ideas on how we can improve the chair to provide a user experience, please send them to us via email. Your will help us grow and produce more professional products that be?er serve our customers. Thank you for your help!

introduction

Thank you for choosing our product!

We hope our product meets or exceeds your Should you have any quoins, feel free to contact the seller including your contact Informa on (Name, Phone Number, Address). Our customer represented will contact you as soon as possible.
We suggest that you keep this manual in a safe place. It containsessenal informant regarding the operon of your chair.

General warnings

Indoor use only.
Ensure that only one person uses this chair at a ?me.
Do not dry wet areas with hair dryers, etc.
Do not over expose the leather to sunlight.
Do not leave the chair in the recline potion.
Take care to avoid sharp objects coming into contact with the chair such as needles, pins, scissors, etc.
Do not leave the chair in the UP or DOWN when not in use.
Do not drag the chair when moving or as this may cause damage to the mechanism and trap the cables.

Caution!

The rise/recline of the footrest is sup-ported by a scissor mechanism. Do not leave children or pets unsupervised or directly around the chair. There is l risk of trapping by the mechanism. Take care to avoid trapping 11 clothing, blank ets, ﬁngers etc.
Make sure there is enough distance between the wall and the chair back BEFORE fully reclining. Reclining the chair too close to the walk will damage the chair. We suggest you keep 20 inches between the wall and your chair.

Speciﬁc Warnings

Maximum loading capacity 350 lbs!
Ensure that only one person sits in the chair at a ?me.
Do not route any cables under the chair or through any moving part of the chair. There is a risk of the cable being damaged which could cause an electric shock.
Do not use the chair with an electric blanket.
Do not move the chair while the power cable is connected to the outlet.
Keep all electronics away from moisture and extreme tempera-tures.
If the chair becomes damaged, unplug and contact the seller for service.
Unplug the base before cleaning.
Avoid liquid on to the electrical system.
Do not step on the armrests or footrest ,the mechanism may be damaged by too much weight on it.
When the chair is in the raised not sit down heavily onto it,
Ensure that the footrest does not catch on the carpet.
Be careful while using sharp objects such as needles, pins ,scissors, etc.
Do not drag the chair as this may damage the mechanism or break the cables.
We do advise that the chair be checked once every 12 months.
Only use authorized accessories for the chair .but, lower yourself gently. Severe impact could damage the mechanism.

Step 1. Fasten the castors on the rear of the chair.
- Lay the chair base evenly as shown below.
- Fasten the castors using a wrench.
Step 2:Assemble the chair arms
- A. Align the locking clips.
- B. Push the arm down evenly with both hands to the boom.
Step 3. Assemble the chair back.
- A. Align the locking clips.
- B. Slide the backrest into the chair base.
Step 4. Assemble the chair ears.|
- A. Align the locking clips
- B. Push the ear down evenly with two hands to boom.
Step 5. Connect the AC adapter and the cord as shown below.
Step 6. Arrange the position of controller.
- a. Press this “a” button to lift chair in the highest position as show above.
- b. Customer can choose to place the controller on the left or right side of the chair according to their preference as show below

Remote control

Before you operate the controller. Ensure all the cables are clear of the mechanism. The chair isn’t situated on top of any cables.
a Lowers/Closes footrest and lis chair.
- /Opens footrest and lowers chair.
- c Lowers/Opens backrest.
- Closes backrest.

Speciﬁc Warning

People with heart disease should be when using this massage.

Tip
This pillow is recommended when lying down on this chair it will help to support your body and make you more comfortable during sleep.

Cleaning-quick steps to clean the chair

Please dust the chair frequently.
Wipe over using a damp and so cloth. Let the chair dry thoroughly before use.
Use a vacuum equipped with a so brush abashment.
Use eco-friendly soap(we highly recommend using cleaners and that are made speciﬁcally for leathern ever use any type of harsh cleaners, especially alcohol-based products.)

Safe Seating

Position The chair is a lifting device and it is important that you are positioned correctly in the chair when it is rising and lowering .If the correct body position is not maintained, there is a risk of injury or damage to the chair. The central position should be used either in the standing or sitting mode.

A:Correct position

Sit centrally with arms on the chair.
B:Incorrect position: The body is unstable and there is a possibility of injury.
C:Keep your feet on the floor as the chair is lifting.

General Troubleshooting Guide.

How can I ask for help when something goes wrong with my product?
Click contact link, send us an email, please include

Batch Number.
Brief problem description.
Contact info. (phone number email).
Video and pictures demonstrating the problem.

What if my lift chair does not work at all?

Make sure the outlet is turn on and has electricity.
Ensure the chair is plugged.
Make sure there are no cable damages.

My chair only partially working, what is the reason?

The uncorking part may need to be replaced. (All the accessories can be replaced very easily, the seller will provide an online teaching video if needed.)

What if my chair or controller starts to overheat or smell like smoke?

Unplug the chair and discontinue use of the chair immediately. Contact seller for further assistance.

Noises All motors hum and vibrate slightly. This is normal. There are many moving parts and you may hear noises when operating the chair. However, if the noise is excessive, contact a customer service representative.

Where do I ﬁnd the batch number on my chair?

You can ﬁnd the batch number in two is on the back of this manual and the second is underneath the footrest of the chair. Please note that batch numbers must be provided in order for any replacement parts or service to be carried out.
If you are uncertain about your chair and the way it is working, unplug it and contact seller for father assistance.

WARRANTY

Electronic components(motor/transformer/controllers)-1 year. 2.Cover (fabric/PU/PVC/ combined fabric/leather/etc)-2 years. 3.Reclining mechanism-3 years.
Your new chair is covered by above warranty ,please note that this does not include the man-made damage.
If man-made damage is found during the company will answer for the maintenance and will charge maintenance costs generated by this(shipping and handling).