FRONT RUNNER F TBMK022 Tent Mount Kit 2 Piece Tall Instruction Manual
- June 13, 2024
- Front Runner
Table of Contents
TENT MOUNT KIT 2 PIECE TALL
TBMK022
TBMK023
TBMK024
F TBMK022 Tent Mount Kit 2 Piece Tall
READ ME !
Thank you for purchasing a Front Runner Tent Mount Kit 2 Piece Tall.
Before you start, take a moment to familiarize yourself with the Fitting
Instructions and the included components.
Refer to Page 2 for a list of all the components, quantities and tools
required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY
ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN
AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE
RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR
VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING
THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE, YOU MUST READ AND
UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT
RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF
THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE
NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE
PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the
failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this
product.
CHECK ONLINE FOR THE LATEST FITMENT GUIDE
GET ORGANIZED
FIT AND SECURE
Depending on the tent opening and orientation the tent base channels may need
to be rotated.
**** Tent Channels must run across the Bracket Bends.
Taking into account the length and width of your tent, choose where you’d like
to position it on the rack, this will determine where you need to fit the Tent
Mount Brackets (Item 1)
**** Where possible use the combined slats to mount the brackets. If this is
not possible then a slat with a leg or foot installed.
Loosely assemble the Tent Mount Brackets (Item 1) to the rack using Channel
Nuts (Supplied with the Tent) M8 x 16 Hex Head Bolts, M8 x 25 x 2 Flat Washers
and M8 Nyloc Nuts (Items 2, 3 & 4).
Loosely assemble the Tent to the Tent Mount Kits (Item 1) using M8 x 25 Hex
Head Bolt, M8 x 25 x 2 Flat Washers and M8 Nyloc Nuts (Items 3, 4 & 5).
** For larger & heavier tents additional mounting brackets may be required.
FIT AND SECURE**
Center the tent left to right and front to rear then fully tighten all fasteners. Place M8 Nut Caps (Item 6) over all Hex Head Bolts.
FINISH
Congratulations! You did it. Take a step back and admire your work!
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
Now’s the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action!
FrontRunnerOutfitters #BornToRoam
Share your adventures on: TBMK025_REV_A00
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>