zidoo Z2000PRO 4K UHD Media Player Instruction Manual

zidoo Z2000PRO 4K UHD Media Player

Product Information

Specifications:

• Device Type: [Insert Device Type]
• Model Number: [Insert Model Number]
• Compliance: FCC Part 15
• Radiation Exposure Limits: FCC approved for an uncontrolled environment
• Minimum Distance: 20cm between the radiator and the body

Product Usage Instructions:

Step 1: Unboxing and Setup

1. Remove the device from its packaging.
2. Inspect the device for any physical damage or missing components.
3. Place the device on a stable surface near a power outlet.
4. Connect the power cable to the device and plug it into a power outlet.
5. Wait for the device to power on and initialize.

Step 2: Connecting to a Network

1. Ensure that your Wi-Fi network is operational and within range.
2. Access the device’s settings menu by [Insert Method – e.g., pressing the settings button on the device or using a mobile app].
3. Select the “Network” or “Wi-Fi” option.
4. Choose your Wi-Fi network from the available list.
5. Enter your Wi-Fi password if prompted.
6. Wait for the device to establish a connection with the network.

Step 3: Using the Device

[Insert specific instructions on how to use the device, including any buttons, controls, or settings. Provide information on how to navigate menus, adjust settings, and perform common functions.]

Step 4: Maintenance and Safety

To ensure the longevity of your device and maintain safety standards, please follow these guidelines:

• Keep the device away from water and other liquids.
• Avoid exposing the device to extreme temperatures or direct sunlight. Regularly clean the device using a soft, dry cloth.
• Avoid using abrasive cleaners or solvents that may damage the device’s surface.
• If you encounter any technical issues or have questions about the product, refer to the troubleshooting section in the user manual or contact our customer support.

FAQ (Frequently Asked Questions)

Q: Can I modify the device in any way?

A: No, any changes or modifications to the device not explicitly approved by the manufacturer may void your authority to operate the equipment. Please refer to the user manual for further details.

Q: What are the FCC Rules that this device complies with?

A: This device complies with part 15 of the FCC Rules, which states that it should not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.

Q: How far should I keep the device from my body?

A: To comply with FCC radiation exposure limits, it is recommended to maintain a minimum distance of 20cm between the radiator of the device and your body.

Introduction to Hardware of 22000 PRO

Device Interface
Zidoo Z2000 PRO is equipped with audio and video input & output ports and data transmission ports. Please refer to the descriptions in this manual.

Front

Right

Back

Note:

• Please load/change the hard disk after turning off the power. If it is a brand-new hard disk, Please load it after formatting it.
• Please prevent the orifice of the cooling fan from being blocked.
• Do not touch any liquid in case the liquid runs into the inner part of the device and damage it.
• Any maintenance personnel who are not appointed are not allowed to open the case.

Load the Hard Disk

Z2000 PRO is equipped with 3.5 inches HDD Bay and high speed SATA transmission port. The hard disk can be loaded by pushing with hand. (The maximum hard disk supports 14 TB )

Note: Do not load or change the hard disk while the power is on to avoid damage of the device or hard drive data. If it is a brand-new hard disk, please format it before loading it to the device. This device supports hard disk of the following formats: EXT3, EXT4, NTFS, FAT32, EXFAT.

Device Connection

1. Connect HDMI Cable to TV
2. Cut off the power. Please make sure the power of the TV and media playerare off.
3. When the TV is turned off, please connect HDMI port on Zidoo to HDMI IN port on TV.
4. Connect with the power. This device is equipped with suitable AC power adapter. Please connect the head of AC power adapter to the AC power input port of this device, then insert the plug of AC power adapter into the socket of 11 OV -240V.
5. Press the power button on the front panel of the device or press the power button on remote control to turn it on. And then turn on the TV.
6. Corresponding video source is selected on TV.
7. Connect AV Cable to TV
   The connection method is same as connecting HDMI cable.

22000 PRO Specification

• Front Display LED
• Shell Aluminum Alloy
• OS Android 11
• CPU Rea Itek RTDl 6 l 9BPD ARM Cortex-A55(Quad-core)
• GPU ARM Mali-G57
• NPU l .6TOPS
• RAM 4GB DDR4
• Internal Storage 32GB eMMC
• Bluetooth BT 5.2
• WIFI 2.4G + 5G dual-band WiFi, 802.11 a/b/g/n/ac/ax 2T2R, 802.11 ax MIMO OFDM
• Ethernet 1 *RJ-45 Ethernet Jack (10/100/1 000Mbps)
• HDMI Out HDMI 2.1, support up to 4K @ 60p,  HDR, 12Bit, YCbCr 4:4:4 color range, support audio pass-through
• Video Decoding 4K@60p,AV1 /HEVC/H.265, l 2Bit, HDRl 0, HDRlO+, Dolby vision
• Audio Decoding Support high-definition audio pass-through and audio decode
• Intelligent Control Mobile APP control, RS-232, TCP/IP control and WOL support
• SATA l*HDD Bay
• USB 1 USB 3.0, 2USB 2.0
• Power Supply 100-240V-,50/60Hz,Max 0.25A
• Other interface 1 IR Receiver, 1 RCA Cvbs, 1 RCA Audio L/R Channels, 1 Coaxial/1 SPDIF(2CH, 5.1 CH), 1 RS-232

Boot Initialization Wizard

Before using the machine formally, the system will perform the initial setup. Please set according to devices and requirements to get the best visual experience.

1. System language selection, screen zoom, time zone setting Choose the system language according to your language habit.

   • Press the UP and DOWN buttons on remote control to adjust screen display area.
   • Select the time zone for the system according to your location.

2. Bluetooth Match-Up
   Let remote controller be aligned with media player and press Page-Down KEY and Menu KEY at the same time for least 5 second until indicator light blinking.The light will be off after matching successfully.

3. Network Setting
   Configure network to connect device with network quickly.
   WIFI: choose network SSID, input password and connect WIFI. Ethernet: plug in the network cable to connect the network automatically .

4. Select output mode
   Please select the corresponding mode according to your needs, then it will finish relevant setting.
   Wizard mode: select the corresponding option according to your usage environment and device connection.

   • Expert mode: The audio and video output is customized by users, it is recommended for professionals.

5. The key definition
   Define the corresponding functions for number keys, timing key, subtitle key, audio key, up and down keys and page keys on the remote control according to your usage habits.
   After completing settings above, please follow prompts and click “Next” to finish initial setup. Enjoy Zidoo audio visual feast!

OTA System Update

Zidoo will update the firmware from time to time.
Find the update icon in APPs and click it, online update and local update are supported. After ticking “Automatically check online upgrade”, you will receive the prompt for the latest firmware update automatically.

1. Online Update
   Click “Online Update” to obtain information of online update.

2. Local Update
   Users can download the update files on the forum or official website and update firmware through files.
   Copy the downloaded update file to USB disk. Click “USB update” to select the update file.
   Download the update file by online update or local update. Click “Update” to update it.

The system will automatically check the update file whether is completed or not.

Note: Automatically access to system upgrade. Please don’t power off in the progress.

Once the update process is completed, the system will automatically restart.

Special Note

To guarantee user experience, Zidoo will update the firmware from time to time. Therefore, this manual may not be totally in line with the product.

Guarantee

User File

Guarantee Item

1. One year guarantee from date of purchased(not including fittings).
2. All of damage by man-made(tear open the housing, tear off the sticker, un normally using), or losing this card, we will not guarantee.

FCC

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>