Shopify Scene10cas Casambi Scene Controller Selector User Guide

Shopify Scene10cas Casambi Scene Controller Selector

Specification

• Product Name : Scene10cas
• Manufacturer : DMX Engineering LLC
• Product Type : Casambi Scene Controller/Selector
• Model Number : N/A
• Website : http://dmx.engineering
• Radio : Casambi CBM003 Long Range Radio
• Input Voltage Range : 12-24 VDC, Class 2
• No-load Input Current : 30 mA
• Connection Type : 0-10VDC Analog Dimming Master Controller
• Supported Devices : iPhone 4S or later, iPad 3 or later, iPod Touch 5th gen or later, Android 4.4 or later devices produced after 2013 with full BT 4.0 support
• Dimensions : 2.2 x 1.2 x 0.7 inch (72.6 x 30.0 x 18.0 mm)
• Weight : 0.8 oz (23 g)
• Certifications : FCC ID: 2ALA3-CBM002A, IC: 22496-CBM002A, UL STD 916, CSA STD C22.2#205
• Connectors : Wire range, solid & stranded: 0.5 – 1.5 mm2 (14 – 22 AWG)
• Indoor Use Only : Yes

Product Description

• The Scene10cas is a Casambi Gateway device designed to connect a standard 0-10VDC analog dimming master controller to provide remote selection of pre-defined Casambi Scenes and Scene Intensity. It acts as an intermediate device between a 12-24 VDC Class 2 power supply and a two-channel 0-10VDC master controller.
• The Scene10cas decodes both 0-10VDC channels and provides Scene selections by mapping the first 0-10V channel into voltage segments. The second 0-10VDC channel allows for 0-100% intensity selection for the selected Casambi Scene. It also offers voltage trim and hysteresis values to accommodate installations where the 0-10VDC levels may not be full range or are noisy due to installation factors.
• The Scene10cas can be configured using the Casambi app, which is available for free download.

Mechanical Data

• Compatible devices
  • iPhone 4S or later
  • iPad 3 or later
  • iPod Touch 5th gen or later
  • Android 4.4 or later devices produced after 2013 with full BT 4.0 support
• Input : 12-24 VDC, 30mA, Use Class 2 power supply
• Dimensions : 2.2 x 1.2 x 0.7 inch (72.6 x 30.0 x 18.0 mm)
• Weight : 0.8 oz (23 g)

Technical Data

• Input Voltage range : 12-24 VDC, Class 2
• No-load input current : 30 mA
• 0-10VDC Input (A and B) : Configuration 2-wire analog 0-10VDC, two channels
• 1mA source current, input must sink for control
• Top and bottom trim and hysteresis user programmable
• Casambi Vendor Parameters
  • Scene Control/Selection Number of Scenes : Determines the voltage window range for each Scene. For example, if 4 Scenes are desired, this sets the voltage window to 2.5V (10V/4 = 2.5V) per Scene
  • Channel 1 : Scene selection
  • Channel 2 : Intensity level
• Radio transceiver : Casambi CBM003B Radio Module
  • Operating frequencies : 2.401-2.483 Ghz
  • Maximum output power : typ. +8 dBm
  • -103 dBm RX sensitivity in long-range mode

Connectors
Wire range, solid & stranded: 0.5 – 1.5 mm2 (14 – 22 AWG) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning
Changes or modifications not expressly approved by DMX Engineering and Design LLC could void the user’s authority to operate the equipment. Frequently Asked Questions

1. *  **Can I use the Scene10cas outdoors?  

   ** No, the Scene10cas is rated for indoor use only.

• *  **How do I configure the Scene10cas?  

  ** The Scene10cas can be configured using the Casambi app, which is available for free download. Please refer to the user manual for detailed instructions on configuring the device.

• • What are the compatible devices for the Casambi app?
    The Casambi app is compatible with iPhone 4S or later, iPad 3 or later, iPod Touch 5th gen or later, and Android 4.4 or later devices produced after 2013 with full BT 4.0 support.
• • What is the voltage range for each Scene selection?
    The voltage window range for each Scene selection is determined by the number of Scenes. For example, if 4 Scenes are desired, the voltage window will be set to 2.5V (10V/4 = 2.5V) per Scene.
• • What is the maximum output power of the Casambi CBM003B Radio Module?
    The maximum output power of the Casambi CBM003B Radio Module is typically +8 dBm.

Scene10cas

• USA & Canada
• Casambi Scene Controller/Selector
• DMX Engineering LLC
• http://dmx.engineering

0-10VDC Casambi Scene Selector with Casambi CBM003 Long Range Radio

Product Description

• Scene10cas is a Casambi “Gateway” device designed to utilize a connection to a standard 0-10VDC analog dimming master controller to provide remote selection of pre-defined Casambi Scenes and Scene Intensity. Scene10cas is connected between a 12-24 VDC Class 2 power supply and a two-channel 0-10VDC master.
• Scene10cas decodes both 0-10VDC channels, and provides Scene selections by mapping the first 0-10V channel into voltage segments, which are then selected depending on the voltage level. The second 0-10VDC channel provides 0-100% intensity selection for the selected Casambi Scene.
• Voltage trim and hysteresis values are also provided to implement installations where the 0-10VDC levels may not be full range, or are noisy due to installation factors.
• Scene10cas can be configured with the Casambi app which can be downloaded free .

Typical Connection Diagram

Mechanical Data

Dimensions are in mm. * To point is on bottom side

• Dimension s: 2.2 x 1.2 x 0.7 inch 72.6 x 30.0 x 18.0 mm
• Weight : 0.8 oz (23 g)
• DMX Engineering LLC
• 9221 E. Baseline Road, Suite 109-492 Mesa, AZ 85209

Certifications
FCC ID : 2ALA3-CBM002A IC: 22496-CBM002A
Conforms to UL STD 916 Certified to CSA STD C22.2#205

RATED FOR INDOOR USE ONLY

• Compatible devices
• iPhone 4S or later
• iPad 3 or later
• iPod Touch 5th gen or later

Android 4.4 or later devices produced after 2013 with full BT 4.0 support

Technical Data

• Input
  Voltage range : 12-24 VDC, Class 2
  No-load input current : 30 mA

• 0-10VDC Input (A and B) Configuration
  2-wire analog 0-10VDC, two channels
  1mA source current, input must sink for control Top and bottom “trim” and hysteresis user programmable Casambi Vendor Parameters

• Scene Control/Selection
  Number of Scenes —determines the voltage window range for each Scene. For example, if 4 Scenes are desired, this sets the voltage window to 2.5V (10V/4 = 2.5V)per Scene
  Channel 1 —Scene selection
  Channel 2 —Intensity level

• Radio transceiver
  Casambi CBM003B Radio Module
  Operating frequencies: 2.401-2.483 Gaz Maximum output power: typ. +8 dBm
  -103 dBm RX sensitivity in long-range mode

• Operating conditions
  Ambient temperature, ta: -13…+113°F (-25…+45°C)
  Max. case temperature, tc: +167°F (+75°C) Storage temperature: -13…+167°F (-25…+75°C) Max. relative humidity: 0…80%, non-cond.

• Connectors
  Wire range, solid & stranded: 0.5 – 1.5 mm2
  14 – 22 AWG

Installation

• Connect a Class 2 power supply with 12-24 VDC output voltage to the input connector of Scene10cas. Make sure not to use a constant current LED driver and make sure that the cable polarity is correct.The product has two 0-10VDC analog positive input connections, plus one common (RETURN) ground. Connect the 0-10VDC load wires to a 0-10VDC master of your choice to give you 0-10VDC control of your Casambi Scene lighting network. Add Scenes to the Casambi network, the  Scene10cas will allow up to 10 Scenes to be selected.
• Using the Casambi app, go to Gateways, and press on the Scene10cas device, and add it to your Casambi network. Now press on the Scene10cas icon, and scroll to the bottom of that screen. Note at the bottom of this screen there are 16 user programmable parameters—Number of Scenes, High and Low Trim, and Hysteresis for each channel, plus 10 Scene selectors. First choose how many Scenes you are wanting to control, and not that this now divides the 10V span into “voltage segments” which now depending on the input voltage to channel A, will now select Scenes. The Trim fine tune the bottom and top analog voltage input, and hysteresis allows for managing inputs that may be noisy. Then select up to 10 Scenes from your pre-defined Scenes in your Casambi network.
• Scene10cas should not be placed in a metal enclosure, such as metal junction boxes. Metal will attenuate radio signals which are crucial to the operation of the product. If the product will have to installed into a junction box, make sure to use a plastic junction box. Scene10cas is an ETL Listed Open-Type device which means that it will have to be used together with a Class 2 power supply with maximum output power of 100 VA. The product can be installed outside of junction box. Make sure to comply with National Electric Code in installation and when selecting installation wires.

Range
The range between two Scene10cas’s or between a Scene10cas and a smart phone can vary depending on obstacles and surrounding material. In open air the range between two Scene10cas can be in excess of 200 ft, but if the unit is encapsulated into a metal structure, the range can be only few feet. Therefore, thorough testing is high suggested. Casambi uses mesh network technology so each Scene10cas acts also as a repeater. When testing the network, it is important to test that each unit can be controlled from any point of the network covered area.

Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation.

Warning
Changes or modifications not expressly approved by DMX Engineering and Design LLC could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement for Canada
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions

1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment is exempt from the routine RF exposure evaluation requirements of RSS-102. This equipment should be installed and operated with a minimum dis-tance of 20 cm between the antenna and the user or bystanders.

Information in this document is subject to change. Copyright DMX Engineering LLC 2023
Scene10cas User Guide v2.02 USA and Canada

WARNING
Cancer and Reproductive Harm www.P65Warninas.ca.aov.

DMX Engineering LLC
9221 E. Baseline Road, Suite 109-492 Mesa, AZ 85209

References

• DMX Engineering | DMX & Casambi Lighting Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>