intempo WDS580 Bluetooth Party Speaker Instruction Manual

www.intempo.co.uk
WDS580 BLUETOOTH® PARTY SPEAKER
INSTRUCTION MANUAL

Description of Parts

1. Karoke Speoker main nit
2. Spesker
3. Micophone
4. LED indictr lghts
5. LED lghts
6. Micophone on/offsvitch
7. LED disloy sreen
8. Speaker ON/0FF sitch
9. Ploy/pause buton [ ]
10. Skipbock button [ ]
11. Skip forvrd buton [ ]
12. REC buton [REC]
13. Volume coirol dial [MASTER VOLUME]
14. Equoliser buton [EQ]
15. MC buton [MIC)
16. LED light buton [LED]
17. Made/TWS button [MODE/TWS]
18. SD/TF cord sl
19. USB port
20. Aux, inpt port
21. Micophone nput port
22. Type-C 5V charging port
23. Chrging indictor lght
24. Type chrging able
25. Linein Aux.cble

Plase et srcions for fulurerefrnce.

Safety Instructions

When using electica products,basic afey precautons should alvays be followed.
Keep the product and its occessories out of the reach of children. Keep smal pars oway from children as these may present a dhoking hazard.
Chidren under 8 years shoud be supervised 1o ensure that they do not ply with he product.
This product s ot o foy.
This product confoins no user serviceable pars. If he produci ond any of ifs acesores are molfncioning or domoged; he unt shoukd be reyce. Keep the productand i accessories away fom heat souce, direc sunlight,humidit, woterand any aher iquid, or sharp edges that could couse domge.
Ensure the speaker is well-venfloed.
Do o leave any objecs suscepible to mognetsm (cush cards fc) near the product.
Da not operate the productwith wet hands.
Do nof operate the product if it has been exposed o water, moisture or any ther iui,fo preventagansteletic shoc,explosion and/or inury 10 yourselfand domage fothe product.
Do o usethe product for anything other than i intended use Do ol use any acessores other than those supplie.
Do not put objeds info oy ofthe openings.
This product s infended for domestic use only. It should not be used for commercial purpaes,
To preven pssible hearing domage, do ot fien o bigh vlume fevels for long prids oftm — this may s damoge the produc.
NOTE: it is advised that the product is not used whilst charging, as this could reduce the life of the battery.

Battery Safety

The supply terminals are not to be short-circuited.
In the event of a battery and cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Secondary cells and batteries need to be charged before use. After extended periods of storage, it may he necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
Keep batteries out of the reach of children.
Do not crush, puncture, dismantle or otherwise damage batteries.
Do not store above 60 °C.
Avoid storage in direct sunlight.
Do not dispose of exhausted batteries in household waste.
Do not expose the batteries to heat or fire as they may explode.
Once the batteries have heen exhausted, dispose of the product at a local recycling station. Contact the local government offices for further details.
This product is fitted with a 3.7 ¥ 2200 mAh lithium ion rechargeable battery (non-removable).

Declaration of Conformity

UP Global Sourcing UK Ltd. hereby declares that this product is in compliance with the essential requirements and other provisions of directive 2014/53/EU.
The declaration of conformity may be consulted ot UP Global Sourcing UK Lid., Victoria Street, Manchester OL9 ODD, UK/Edmund-Rumpler StraBe 5, 51149 Koln, Germany or https://intempo.co.uk/decloration-letters/
Model No. EE7515

Disposal of Waste Batteries and Electrical and Electronic Equipment

This symbol on the produc, its batteries or its packaging means ps4 that this product and any batteries it contains must not be mms “isposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recyding will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of  hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some retuilers provide take-back services which allow the user to return exhausted equipment for appropriate disposal. Ht is the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more information about where to drop batteries, electrical and electronic waste off, please contact the local city/municipality office, household waste disposal service, or the retailer.

Care and Maintenance

Wipe the speaker with o soft, lint-free cloth.
DO NOT:
Use any abrasive cleaning solvents to clean the speaker.
Expose the speaker to extremely high or low temperatures.
Drop the speaker.
Attempt to disassemble the speaker.
Dispose of the speaker in a fire as if will result in an explosion.

Instructions for Use Charging the Battery

The speaker is fitted with a 3.7 ¥ 2200 mAh lithium ion rechargeable battery (non-removable). It is recommended that the battery is fully charged before first use; this will take approx. 5 hours.
Connect the Type-C USB end of the USB charging cable into the Type-C 5 V charging port on the speaker and the other end to a compatible USB port.
Whilst charging, the LED indicator light will illuminate red. Once charging is complete, the LED indicator light will switch off.
Carefully disconnect both ends of the USB charging cable and store it safely for future use.

Using the Karaoke Speaker Basic Functionality

Turn on the speaker by pressing the ‘ON/OFF’ switch towards the ‘ON’ position.
To adjust the volume of the speaker, use the ‘VOLUME’ diol. Turn it in o clockwise direction to increase the volume; turn it in an anticlockwise direction to decrease the volume. The LED display will indicate the volume level.
Pause a track by pressing ‘ ’; push it again to resume the track.
To switch to the next track, press ‘ ’ once. Play the previous track by pressing ‘ ’ once.
Press ‘LED’ once to cycle through different colour options. Press and hold ‘LED’ to turn off the LED lights.
Press ‘EQ’ to cycle through the different sound options. There are 4 sounds in total: ‘WORMAL’, ‘POP’, ‘ROCK’ and ‘JAZZ’.
Press the ‘ON/OFF’ switch towards the ‘OFF’ position to turn the speaker off.

Using the Mic

STEP 1: Insert a mic connector into the mic input port and switch on the mic by sliding the ‘MICROPHONE ON/OFF’ switch to the ‘ON’ position.
STEP 2: Adjust the volume of the mic by pressing ‘MIC’. The LED display with show ‘ ’. Press and hold ‘ ’ to increase the volume of the mic. Press and hold ‘tea’ to decrease the volume of the mic.
STEP 3: Adjust the echo level of the mic by pressing ‘MIC’ twice until the LED display shows ‘E’. Press and hold ‘ ’ fo increase the echo level of the mic. Press and hold ‘ ’ to decrease the echo level of the mic.
WARNING: when using the mic, give the speaker a 1 metre exclusion radius, os being too close could cause loud feedback and damage the speaker.
Modes
The speaker must be turned on before using any of the following modes.

Bluetooth Mode Pairing with a Bluetooth Compatible Device

STEP 1: Once the speaker has been turned on, the LED indicator light will flash ond a fone will sound to indicate that the speaker is ready to he paired with a Bluetooth compatible device.
STEP 2: Search for the speaker using a Bluetooth compatible device. Select ‘EE7515° to connect ond poir. Once a connection has been made, the LED indicator light will remain lit to signal the devices are paired.
STEP 3: To unpair or remove a Bluetooth compatible device from the speaker, turn off the Bluetooth function on the compatible device. The speaker can now be paired with a new compatible device.
NOTE: Once connected, sound can be contralled using the master volume control dial or the relevant controls on the Bluetooth compatible device.

Connecting to Another TWS Speaker

STEP 1: Turn on both the speakers. Press and hold ‘MODE/TWS’ on either speaker and a tone will sound to indicate that both speakers have successfully paired with each other.
STEP 2: Connect both the speakers to a Bluetooth compatible device following the instructions in the section entitled ‘Pairing with a Bluetooth Compatible Device’. Once a Bluetooth connection has been made, the LED indicator lights will remain lit on both speakers. When playing music, the LED indicator lights will start flashing.
STEP 3: To disconnect the speakers from each other, press and hold ‘MODE/TWS’ on cither speaker. A tone will sound to indicate that pairing has been disconnected and the LED indicator lights on both speakers will start flashing

TF Card/USB Mode

STEP 1: To use TF cord mode, insert a TF cord (not included) into the TF card slot. The speaker will automatically change to TF card mode.
STEP 2: To use USB mode, insert a compatible USB drive into the USB port. The speaker will automatically change to USB mode.
STEP 3: If the speaker does not automatically change to TF card/USB mode, press ‘MODE/TWS’ until the desired operation is selected.
NOTE: once connected, sound can be controlled using the speaker.
No USB drive should be inserted whilst using TF card mode or vice versa, as this could interfere with playback.
The speaker will only recognise MP3 audio files; if other files are present on the TF card or USB drive, this may prevent the speaker from playing.
Aux. Mode
Connect one end of the line-in Aux. cable to the Aux. input port on the speaker and the other end to an MP3 player or other compatible audio source.
NOTE: Once connected, volume can be controlled using the master volume control dial or the relevant controls on the compatible device.
The speaker cannot be used to skip tracks during Aux. mode.

Recording/Playing Audio

STEP 1: Insert a TF Card or USB stick into the relevant port on the speaker. The moximum size is 126 GB.
STEP 2: Insert the mic into the mic input port. Press ‘REC’ once and record through the mic. Press ‘REC’ again to stop recording.
STEP 3: To ploy a recorded file, insert the TF Card or USB into the relevant port. Press ‘REC’ twice to start playing the recorded files.
Use ‘ ’ and ‘ ’ to cycle through the recordings.

Troubleshooting

The speaker has no power.
The speaker has run out of charge. Charge the speaker following the instructions in the section entitled ‘Charging the Battery’.
The specker hos no sound.
The volume level is set too low. Check that the volume level is set ot an audible level and adjust accordingly with both the connected device and the speaker.
The speaker is not paired with a Bluetooth compatible device. Follow the instructions in the section entitled ‘Bluetooth Mode’.
The speaker is not connected to a compatible audio source. Follow the instructions in the section entitled ‘Aux. Mode’.
Unable to pair a Bluetooth device with the speaker.
The Bluetooth device is not compatible with the speaker. Check that the Bluetooth device is compatible with the speaker and that the Bluetooth function is switched on.
The speaker is already connected to another device. Turn Bluetooth off on the device and try connecting again.
Follow the instructions in the section entitled ‘Bluetooth Mode’.
The charge of the speaker depletes quickly.
The volume level is set too high. Excessive use of the speaker at high volumes will drain the battery quickly. Charge the speaker following the instructions in the section entitled ‘Charging the Battery’ and listen af a lower volume for better results.
The battery may be reaching the end of its service life and will need to be removed. See the section entitled ‘Battery Safety’.
The mic is not working.
The mic is not securely connected to the speaker. Connect the mic to the speaker following the instructions in the section entitled ‘Using the Mic’. Check that the mic is switch on.

Specifications

Product code: EE7515
Bluetooth version: 5.3
Wireless range: up to 25 m’
Speaker oufput: 2 x 8 W
Frequency ronge: 2402-2479 MHz
Power supply: 5 V
Rechargeable battery: 3.7 V 2200 mAh
Operating frequency: 2.4 GHz
Max. RF output: < 10 dBm
Microphone cable: approx. 190 cm
Effective range may be reduced due the presence of obstacles between connected devices,
The Bluetooth® word, mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks are under license.
Other trademarks and trade names are those of their respective owners.

www.fsc.org

Manufactured by
UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 ODD. UK.
Edmund-Rumpler StraBe 5, 51149 Kiln. Germany.
MADE IN CHINA.
©lntempo trademark. All rights reserved.
www.intempo.co.uk
(D210623/MD000000/V1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>