MiCODUS MV930 GNSS Tracker User Manual

: June 15, 2024
: MiCODUS

Table of Contents

MiCODUS MV930 GNSS Tracker
Product Information
Product Usage Instructions
Main Features
Specifications
How to manage
Package Content
Functions Explanation
Installation Recommendation
Troubleshooting
Full SMS Commands List
Download the APP
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MiCODUS MV930 GNSS Tracker

Product Information

Specifications
- Model: MV930
- Weight: 57g
- Dimensions: 57mm(L) 31mm(W) 31mm(H)
- Battery: Built-in 3.7V 60mAh Polymer Battery
- Working Voltage: 9-95V DC
- Working Current: 12V/Average 40mA, 12V/Less than 10mA (Sleep Current)
- Working Temperature: -20°C to 75°C
- Working Humidity: 10% to 85%RH
- Built-in Memory: 5000pcs GPS data can be stored at network blind area
- SIM Card: Nano SIM
- Cellular Antenna Module: Built-in, FPC MC25
- Cellular Specifications: 2G GSM/GPRS: 850/900/1800/1900MHz
Main Features
- ACC Status Detection
- 2G GSM Connectivity
- GPS+GLONASS/BDS Satellite Positioning
- Remotely Cut Off/Resume Fuel
- Real-time Tracking
- Historical Route Playback
- Vibration Alarm
- Tow Alarm
- Geo-fence
- Disconnect Alarm
- Engine On/Off Alarm
- Battery Low Voltage Alarm
- Overspeed Alarm
- Lifetime Free iOS & Android Tracking Platform (APP)

Product Usage Instructions

Device Setup
- Connect the device to the power source using the appropriate voltage range (9-95V DC).
- Insert the Nano SIM card into the device.
- Ensure the device is placed in an area with a clear view of the sky for optimal satellite positioning.
Using the Tracking Platform (APP)
- Download and install the MiCODUS Tracker app on your iOS or Android device.
- Create an account or log in to your existing account.
- Add the MV930 device to your account by following the provided instructions in the app.
- Once the device is added, you can track its real-time location, view historical routes, set up alarms, and manage other settings through the app.
Additional Features
- ACC Status Detection
- The device can detect the ACC status of your vehicle, allowing you to monitor its on/off status.
- Vibration Alarm
- The device has a built-in vibration sensor that can trigger an alarm if any vibrations are detected. This feature can help protect your vehicle against theft or unauthorized access.
- Tow Alarm
- If the device detects that your vehicle is being towed, it will trigger a tow alarm to alert you of the potential theft or unauthorized movement.
- Geo-fence
- You can set up a virtual boundary (geo-fence) for your vehicle. If the vehicle crosses this boundary, an alarm will be triggered to notify you.
- Engine On/Off Alarm
- The device can detect when the engine of your vehicle is turned on or off. This feature can be useful for monitoring the usage of your vehicle and detecting any unauthorized usage.
- Battery Low Voltage Alarm
- If the device’s battery voltage drops below a certain threshold, an alarm will be triggered to notify you. This can help ensure that the device remains powered and functional.
Frequently Asked Questions (FAQ)
- Q: How long does the device’s battery last?
- A: The built-in 3.7V 60mAh Polymer Battery can provide power to the device. The battery life may vary depending on usage and settings.
- Q: Can I use the device with any SIM card?
- A: The device supports Nano SIM cards. Ensure that you have a compatible Nano SIM card from a supported cellular network provider.

Main Features

$MiCODUS-MV930-GNSS-Tracker-FIG-1 $1$$

Specifications

Device Information	Model	MV930
Weight	57g
Dimensions	57mm(L)31mm(W)31mm(H)
Battery	Built-in 3.7V 60mAh Polymer Battery
Working Parameters	Working Voltage	9-95V DC
Working Current	12V/Average 40mA
Sleep Current	12V/Less than 10mA

℃ ℃

Accuracy

| Location accuracy: <10m（1σ）
Timing accuracy: <30ns（1σ）
Speed accuracy: <0.1m/s（1σ）
External Interface| Cut Off Fuel| Built-in with 12V relay

How to manage

How to manage the tracker to get online?

Step 1 SIM card requirements

Please get a suitable SIM card from your local place. The SIM card must meet below points:

It must be compatible with the 4G LTE or 2G GSM network
Please enable SMS, call, internet data traffic of the SIM card
Remove the PIN code
Enable the caller ID display feature
Use Nano size SIM card for the tracker
Please inquire the SIM card provider for the exact correct APN information

Step 2 SIM card installation

$MiCODUS-MV930-GNSS-Tracker-FIG-1 $3$$

Step 3 Wiring

NOTE: After installed SIM card correctly , it is very important to connect the tracker with external power no less than 12V for power supply before operation!

Step 4 Configure APN

Please get the exact correct APN name from local SIM card provider.Take the tracker to a good signal place for operation and configure the APN for it as below:

SMS Command Format	Reply	Example	Note
APN,ApnName,User, Password#	SET APN OK	APN,orange, orange,orange#	If the

SIM card has APN user and APN password, then use this command.
APN,ApnName#| SET APN OK| APN,internet#| If the SIM card operator doesn’t have APN user and APN password, then please use this command.

Note: The APN information is very important, it must 100% correct to match with the sim card of the tracker, if you configured wrong APN, the tracker also will reply “SET APN ok” but it will can’t get online!

Step 5 Indicator status description

LED	Event	State
CELL LED (YELLOW)	Searching for network	Flash every 1 second
Network has been registered	Solid
GPS LED (BLUE)	GPS is in fixing	Flash every 1 second
GPS has fixed	Solid

ALL LED

| Device is working but stopped more than 5min|

ALL LED TURN OFF

Device has not been turn on
Device ran out of battery

Package Content

GPS Main Unit x 1
Function Cable x 1
Pick x 1
User Guide x 1
Genuine Packing Box x 1

Functions Explanation

a. Cut Off Fuel/Resume Fuel
- Set the center number by this SMS command: CENTER,A, center number#
- Send this SMS command from the center number: RELAY, A#
- A= 0/1/2; (0: Resume Fuel; 1: Cut Off Fuel Immediately;
- 2: Cut Off Fuel Safely)
- For example:
b. Vibration Alert:
- This vibration alert function just works under stationary status. How to use this function:
- Configure SOS numbers for the tracker by this SMS command: SOS, A,1st number,2nd number,3rd number# 3 SOS numbers support at the most
- Enable the device to enter into arm mode by this SMS command: ARM#
- Configure the alarm ways by this SMS command: SENALM,[A][, M]#
- A= ON/OFF, default: OFF;
- M= 0/1/2, way of alarming,
- 0: GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default:1
- Keep the device under stationary status for more than 5min to let it enter into sleep arm mode; Vibrate the device then the tracker will send the vibration alarm messages
- For example:
c. External Battery Low Voltage Alarm
- Command format: LVALM,A,B,M#
- A= ON/OFF, default： ON;
- B= 9-95V (voltage alarm threshold), default: 11.1v
- M= 0/1/2, way of alarming,
- 0: Server only,
- 1: SMS+Server,
- 2: SMS+Server+Call, default:1；
- For example: LVA LM, ON,11.5,1#
- This means once the external battery voltage is less than 11.5v the device will send an alarm message via server and SMS.
- For example:
d. Engine Start and Flameout Alarm
- Command format: ACCALM,A,B,M#
- A= ON/OFF, Default: ON;
- B: 0/1/2; 0: ACC ON Alarm; 1: ACC OFF Alarm; 2: ACC ON&OFF Alarm; Default:2
- M: 0/1/2 (way of alarm):
- 0: Server only,
- 1: SMS+Server,
- 2: SMS+Server+Call, Default:1;
- For example: ACCALM, ON,2,1#
- This means once the device detects engine start and engine flameout it will send an alarm message via server and SMS.
- For example:

Installation Recommendation

$MiCODUS-MV930-GNSS-Tracker-FIG-1 $9$$

Troubleshooting

Type	Use
Unable to connect to the tracking platform	Check the APN and settings. Check

whether the data service of the SIM card is enabled. Check the balance of the SIM card.
Tracker shows offline| Check whether external power is still connected. Check if the vehicle entered the network blind area. Check the balance of the SIM card.
Unable to locate| Make sure the top side facing upward without metallic things shielded. Make sure it’s not in an area with no satellite coverage.
Location drift| In areas with poor GNSS signal (tall buildings around or basement), drifting may happen.

Check whether vibration happens around to trigger the accelerator.

No command reply| Make sure the command format is correct. The vehicle may be in a network blind area. Make sure the SIM card is well inserted and has SMS service.

Full SMS Commands List

Setting Commands

Functions| Command Format| Explanation

APN Setting

|

APN,Network name[,name, password]#

| APN,CMNET# (if no name & Password) APN,internet,internet,internet# (if with name & Password)

Server Setting

Internet Traffic Switch

| TRAFFIC,ON#| OPEN TRAFFIC OK
TRAFFIC,OFF#| CLOSE TRAFFIC OK

Time Zone Setting

|

GMT,A, B,C#

| Example: GMT,E,8# (Means East +8 zone, no half-time zone)

GMT, W,9,30# (Means West -9.5 zone, has half time zone)

A: E / W, E: East time zone, W: West time zone B: 0 ~ 12; whole time zone

C: 0/15/30/45, half time zone

Set the angle upload

|

ANGLEREP,X, A,B#

| Example: ANGLEREP, ON,30,3# (This means the tracker will send a data supplement when the angle change exceeds 30 degrees and lasts for 3 seconds)

X=ON/OFF, default： ON;

A=5～180 degrees, diversion angle degree, default: 30 degrees；

B=2～5 seconds, detecting time, default: 3

seconds,

ANGLEREP,OFF#| CANCEL UPLOAD ANGLE OK

Mileage Statistics

|

MILEAGE,A,B#

| Example: MILEAGE, ON,5000# (Means enable the mileage statistics feature, the mileage initial value is 5000km)

A=ON/OFF, On/Off mileage calculation, default: Off B=0～999999， Mileage initial value, unit： km ;

default: 0, mileage return to zero

MIELEAGE#| Query current mileage

Add SOS Administrator Number

|

SOS,A,1st number,2nd number, 3rd number#

| Example:

Set 3 numbers at a time: SOS,A,13800138000,13800138001,13800138002#

Set the first numberseparately: SOS,A,13800138000#

Set the second number separately: SOS,A,,13800138001#

Means to set 3rd number separately:

SOS,A,,,13800138002#

---|---|---

Delete SOS Administrator Number

|

SOS,D,1st number,2nd number, 3rd number# or SOS,D,1,2,3#

| Example:

Directly delete the number: SOS,D,13800138000#

Delete 1st number: SOS,D,1#

Delete 2nd number: SOS,D,2#

Delete the 2nd and 3rd number: SOS,D,2,3#

Add Center Number

|

CENTER,A,center number#

| Example: CENTER,A,008613800138000# (Means

the tracker will just can be controlled by this number 008613800138000, 0086 is country code)

NOTE:

1. Please set up the center number with the country code as prefix!

2. After set up center number, the tracker will just can be controlled by center number, it will not reply commands from other numbers!

Delete Center Number

|

CENTER,D#

|

DEL CENTER OK

Data Upload Time Interval

|

TIMER,T1,T2#

| Example: TIMER,5,180# (Means the tracker will upload data every 5s when ACC is on and 180s when ACC is off)

T1 ranges 0/5~18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 10; T2 ranges 0/5~18000 (seconds), upload interval when ACC OFF, default is 10;

Heartbeat Packet Upload

|

HBT,time#

| Example: HBT,3# (Means the tracker will send heartbeat data package to server every 3 min for connection maintenance)

NOTE: Range :1-60min, default 3min.

Sensor Sensitivity

|

LEVEL,A#

| Example: LEVEL,2# (Means set up the shake sensor level to 2)

NOTE: A：Sensitivity Level 1-9 (1-9 is from week to strong vibration)

Arm manually| ARM#| Set the device into arm mode

Disarm manually

|

DISARM#

|

Set the device out of arm mode

Cut Off / Resume Fuel

|

RELAY,A#

| A=1/2;

1: Enable relay immediately 2: Enable relay safely

For Example:

1. RELAY,1#

A is set to 1, the relay command will be executed immediately.

2. RELAY,2#

A is set to 2, the relay command will be executed safely. The vehicle is safe only when the speed is lower than 20km/h if GPS is fixed, or the vehicle is stationary if GPS is not fixed.

---|---|---
RELAY,0#| RESUME FUEL OK
Inquiry Commands
Functions| Command Format| Explanation

Version Inquiry

|

VERSION#

| Device Reply Example: ID:9301074948 IMEI:354188046912460 ICCID:898602A51314F1298017

VERSION:MV930G_V2.0.2 BUILD:OCT 19

2016 16:31:00

Parameter Inquiry

|

PARAM#

| Device Reply Example： ID:9301074948 IMEI:861157040411486 APN:CMNET IP:47.254.77.28:7700 TIMER:10,180 SPEEDLIMIT: 120km/h ANGLERPT: 30′

CENTER: 13428768257 SOS:13267052361,13488888888,13599999999 GMT:E8.00

Latitude&Longitude Inquiry

|

WHERE#

|

LAT:N23.02930,LON:E114.32180,COURSE:0.00,S PEED:0.00KM/H,DATETIME:2015-05-23 14:39:11

Map URL Inquiry

|

URL#

| http://map.google.com/?q=22.557868,113.935090

<0.0km/h 0.0> <2014-12-12 07:32:13> IMEI:354188047752402

Address Inquiry

|

POSITION#

|

NOTE: Reply message’s language is determined by device’s language setting, if get position content failed, device will reply Google Map location link.

Status Inquiry

|

STATUS#

| BATTERY: XX% (Built-in Battery Power Percent)

INTERNET: CLOSED (No Network)

FAILED (Connecting Network or Failure)

SUCCESS (Connected to Network）

NET: NONE (No celluar Signal), HIGH / MED / LOW (Signal Strength) , 18(Signal value) GPS: CLOSED (GPS Module Closed); FIXED,N (Positioned and satellite number); UNFIX,0 (Not Positioned yet)

SPEED: 30KM/H

ACC: ON / OFF (ACC on or oﬀ)

RELAY: ON / OFF (Relay on or oﬀ)

POWER: CONNECTED / DISCONNECTED

(1P2o.5wVe(rVCeohnicnleecbtaetdteorryDvioslctoagnen)ected),

SENSOR: ON/OFF (S sor on or oﬀ), LEVEL: 3 (Sensitivity level 1-9) STATE: ARM (Arm or Disarm)

---|---|---

Alarms Parameters

|

ALARM#

| ID: 19172012644 (ID number of device)

STATE: ARM(DISARM)(Defense status of device) SPEED: ON/OFF(alarm status); 30km/h(alarm value);alarm way

SHIFT: ON/OFF(alarm status); 300m(alarm value);alarm way

VIBRATE: ON/OFF(alarm status);3(sensitivity level);alarm way

ACC: ON/OFF(alarm status); 0/1/2(0: ACC ON, 1: ACC OFF; 2: ACC ON&OFF) (alarm situation); alarm way ; ;

POWER DOWN: ON/OFF(alarm status);alarm way LOW VOLTAGE: ON/OFF(alarm status);alarm way NOTE: Alarm Ways: 0/1/2 ( 0 : SERVER only, 1: SMS+GPRS, 2 : GPRS+SMS+CALL )

Alarm Commands
Functions| Command Format| Explanation

Overspeed Alarm Setting

|

SPEED,A,B,M#

|

Example: SPEED,ON,100,1# (When the speed of the tracker exceeds 100km/h it will send an alarm message via SMS and server)

A=ON/OFF, enable or cancel over speed alarm, default: OFF

B=1～255(km/h), speed limit, default：100(km/h); M=0/1/2, way of alarm, 0 : Server only, 1: SMS+Server, 2: SMS+Server+Call default：1.

SPEED, OFF#

|

CANCEL THE OVERSPEED ALARM OK

Vibration Alarm Setting

|

SENALM,A,M#

| Example: SENALM,ON,2# (Means enable the vibration alarm, and the alarm message will be sent via SMS, server and call once it is triggered)

A=ON/OFF, default: OFF;

M=0/1/2, way of alarming, 0 : Serveronly, 1: SMS+Server, 2 : SMS+Server+Call, default:2

---|---|---
SENALM,OFF#| CANEL VIBRATE ALARM OK

Shift Alarm Setting

|

SHIFT,A, B,M#

| Example: SHIFT, ON,300,1# ( Means Setting 300 meters shift alarm range, when the ignition is turned off, the vehicle’s 300 meters’ shift will trigger the alarm, the alarm message will be sent via SMS and server )

A=ON/OFF; default:ON

B=Shift Distance (Range: 100-9999m)

M=0/1/2; way of alarm, 0 : Server only, 1: SMS+Server, 2: Server+SMS+CALL, default:1

SHIFT,OFF#| CANCEL SHIFT ALARM OK

Auto Arm By ACC

|

ACCARM,ON,M#

| Example: ACCARM,ON,60# (Means when the engine turned to off status, the tracker will enter into arm status automatically after 60s)

Arm Time: M=5-1800s, default: 60s

ACCARM,OFF#| Close auto arm function
ACC Status Change Alarm| ACCALM, A, B, M#| Example: ACCALM,ON,2,2# (Means enable this alarm type, the tracker will send alarm message via SMS, server and call when the engine starts and flameout)

A=ON/OFF, Default: ON;

B: 0/1/2; 0: ACC ON Alarm; 1: ACC OFF Alarm; 2: ACC

ON&OFF Alarm; Default:2

M: 0/1/2 (way of alarm): 0 : Server only, 1: SMS+Server, 2: SMS+Server+Call, Default:1;

ACCALM, OFF#| Cancel ACC alarm function
Power Disconnect Alarm| PWRALM,A, M#| Example: PWRALM,ON,1# (Means when the external power disconnects the tracker will send an alarm message via SMS and server)

A=ON/OFF, default ON;

M=0/1/2, ways of alarming, 0: Serveronly, 1: SMS+Server, 2 : SMS+Server+Call, default:2；

PWRALM, OFF#| Close the power disconnect alarm
Low Voltage Alarm Setting| LVALM,A, B,M#| Example: LVALM, ON,11.2V,1# (Means once the external power voltage is less than 11.5v the tracker will send an alarm message out via SMS and server)

A=ON/OFF, default： ON;

B=9-95 V, Low voltage threshold, can be a decimal, such as

12.5 V

M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2: SMS+GPRS+Call,default:1

LVALM, OFF#| CANCEL LOW VOLTAGE ALARM OK

Any Questions?