Mofa M7 Wireless Microphone Instruction Manual

September 12, 2024
Mofa

Mofa M7 Wireless Microphone

Product Information

The wireless microphone set consists of a microphone, receiver, lightning adapter, Type-C adapter, and various buttons for different functions.

Product Usage Instructions

Turning On the Microphone

Take out the microphone and press and hold the power button on the receiver for 3 seconds to turn it on.

Mobile Phone Usage Instructions

  1. Click the receiver mode button to switch to phone mode.
  2. Insert the adapter labeled “For Mobile” into the phone and the receiver charging port.
  3. The connection light will remain on when properly connected for use.

Camera Usage Instructions

  • Attach the back clip to the receiver and insert it into the camera hot/cold boot interface.
  • Connect the Type-C port of the receiver to the camera MIC audio input interface using a Type-C to 3.5mm TRS cable.
  • Set the camera recording volume to a minimum.
  • Click the receiver mode button to switch to camera mode.
  • Keep the connection light on for proper use.

Phone Charging

When shooting short videos or live broadcasts, the phone can be charged through the receiver interface if supported by your configuration.

Product Introduction

Dear user, thank you for choosing to use our wireless lavalier microphone. This manual will provide you with a clear user guide to help you quickly get started and fully utilize the product’s features. This product consists of three parts: microphone, receiver, and charging compartment. We can provide professional-level recording and live streaming output, plug and play, without the need for an APP. It can be used for online live streaming, VLOG video shooting, program interviews, interview recording, video teaching and other scenarios

Microphone – Button

Multi-function button

Power on/off –

  • long press the multifunction key

Noise reduction –

  • click on the multifunction key

Reverb –

  • Double-click the multifunction key
  • Shut down the microphone – three hit multifunction key

Microphone – indicator light

Receiver – Button

  • Mode key:
    Click to switch between camera mode and phone mode

  • Power button:
    Power on/off – long press the power button

Receiver/charging compartment- pilot lamp

Mode indicator light

Battery indicator

Usage method

Take out the microphone and press and hold the power button on the receiver for 3 seconds to turn it on.

Mobile phone usage instructions

Click the receiver mode button to switch to phone mode, insert the adapter with the For Mobile label on one side into the phone and the receiver charging port on the other side, and the connection light will remain on to use.

Camera usage instructions

  • Attach the back clip to the receiver and insert it into the camera hot/cold boot interface.
  • Connect the Type-C port of the receiver to the camera MIC audio input interface through a Type-C to 3.5mm TRS cable.
  • Click the receiver mode button to switch to camera mode, set the camera recording volume to the minimum, and keep the connection light on to use

Phone charging

When shooting short videos or live broadcasts, the phone can be charged through the receiver interface

Frequently asked question

Why can't I record normally after connecting to my phone?

Can't the microphone record for the camera app that comes with the device?

Some brands of mobile phones have strict restrictions on the system, which prevent the microphone from obtaining audio permissions, not due to the quality of the microphone. If this situation occurs, please contact the brand phone manufacturer. *This product is compatible with the vast majority of apps on the market. Please try using other apps instead.

Is there noise in the recorded sound?

*Check if the microphone is in noise reduction mode (the second indicator light is always on). Click the multifunction button to turn on noise reduction.

Is the recorded sound too low?

What should I do if there is wind noise?

*If you purchased a model equipped with a windshield, please install the windshield on the microphone.

What should I do if the connected phone has low battery during recording?

*Please connect the charging cable to the charging port on the receiving end to charge the phone.

What if there is an echo?

Check if the microphone has the reverb function turned on (the third indicator light is on). Double click the multifunction button to turn off reverb. *Enter the song request interface in the live broadcast room and set it to the original sound in the tuning section.

What if there is an echo during the live broadcast?

*Please turn off the sound on your phone while watching the live broadcast, otherwise there will be echoes (phones in the same space cannot have sound while watching the live broadcast).

Product parameters

  • Wireless transmission: 2.4GHz
  • Sound delay:<20ms
  • Frequency response: 20Hz-20KHz
  • Sensitivity: -35dB
  • Signal to noise ratio: -65dB
  • Transmission distance: 30 meters (turning) -70 meters (visible)
  • Microphone: 360 degree omnidirectional
  • Battery life: Microphone: Approximately 6H
  • Used with charging case: about 12H
  • Battery capacity: Microphone: 80mAh
  • Receiver/Charging case: 230mAh
  • Input voltage: DC4.5-5.2V
  • Adapter: 5V/1A
  • Weight: Microphone: 9g
  • Receiver/charging compartment: 19 grams
  • Size: Microphone: 3516.215.7mm
  • Receiver/charging compartment: 3516.234mm

Safety precautions

  1. The product contains strong magnetism. To avoid magnetization effects, please stay away from easily interfering devices such as magnetic cards, IC cards, implanted medical devices (such as pacemakers), hard drives, RAM chips, etc.
  2. It is strictly prohibited to let the product come into contact with any liquid, and do not immerse the product in water or wet it. Do not use the product in rain or damp environments. After contact with water inside the product, corrosion reactions may occur, leading to battery self ignition or even explosion.
  3. If the product catches fire, please immediately use water, water mist, sand, fire blanket powder, and carbon dioxide fire extinguishers to extinguish the fire. Please choose the fire extinguishing method in the order recommended above based on the actual situation.
  4. Please use the product in an environment between -10°C and 45°C, with a charging environment temperature of 5°C to 45°C.
  5. It is prohibited to disassemble the product in any way. If the battery is punctured during disassembly, it will lead to electrolyte leakage inside the battery, and even cause a fire or explosion.
  6. Mechanical impact, rolling or throwing of products is prohibited. Do not place heavy objects on the product.
  7. Do not place the product in the accessories or inside of heating equipment, cooking equipment, high-pressure containers, etc. (such as microwaves, battery ovens, electric ovens, electric heaters, high-pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating and exploding.
  8. It is prohibited to place products near heat sources (such as stoves or heaters) or in cars on hot days. Do not store the product in an environment exceeding 60°C.
  9. Do not store the battery for a long time after fully discharging it, to avoid damage to the battery cell caused by excessive discharge, and it will not be able to be used again.
  10. The charging compartment, data cable, and battery of the original matching model must be used.
  11. Using noncertified or non matching charging compartment data cables or batteries may cause electric shock, fire, explosion, or other hazards.

Attention:

Due to product version upgrades or other reasons, this manual may be updated from time to time. Unless otherwise agreed, this document is only intended as a guide for use. All statements, information, and suggestions in this document do not constitute any express or implied warranties

FCC Statement

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals