MiCODUS MV720 GPS Tracker User Manual

: October 30, 2023
: MiCODUS

Table of Contents

MiCODUS MV720 GPS Tracker
Product Information
Main Features
Specifications
Product Usage
Main Features
Specifications
How to manage the tracker to get online
Package Content
Functions Explanation
Installation Recommendation
Troubleshooting
Full SMS Commands List
Any Questions
Download the APP
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MiCODUS MV720 GPS Tracker

Product Information

The MV720 MiCODUS Tracker is a GPS tracking device that allows real-time tracking of vehicles and other assets. It comes equipped with GPS, GLONASS, and LBS positioning technology, which ensures accurate and reliable tracking of assets.

Main Features

GPS+GLONASS+LBS Positioning
Realtime Tracking
9-90V Wide Working Voltage
Vibration Alarm
Tow Alarm
Power Disconnect Alarm
Geo-fence
Overspeed Alarm
Lifetime Free Tracking Platform

Specifications

Device Information: MV720
Weight: 53g
Dimensions: 31mm(L) 31mm(W) 57mm(H)
Working Voltage: DC 9-90V
Working Current: 20mA@12V (standby), 50mA@12V (working)
Sleep Current: <2mA@12V
Battery Capacity: No battery, external power only
Working Temperature: -20°C ~ +70°C
Working Humidity: 5% ~ 95% RH
Working Frequency: Quad-band GSM/GPRS 850/900/1800/1900MHz
SIM Card: Standard SIM card
Cellular Antenna: Internal GSM antenna, external GPS antenna
GNSS Specifications:
- Positioning Type: GPS, GLONASS, LBS
- GPS Antenna : External GPS antenna
- Cold Start: 30s (typical)
- H ot Start: 1s (typical)
- Tracking sensitivity: – 165dBm
- GPS Channels: 66
- P osition Accuracy: <10m (2D RMS)

Product Usage

Connect the MV720 Tracker to an external power source with a DC voltage range between 9-90V.
Insert a standard SIM card into the device.
Install the external GPS antenna and place the device in a suitable location.
Log in to the Lifetime Free Tracking Platform to access real-time tracking information of your asset.
Configure the device settings, such as vibration alarm, tow alarm, and geo-fence, according to your preferences.
In case of overspeed or power disconnect, the device will send an alarm notification to the platform and your registered mobile number.
The historical route playback feature allows you to view the asset’s past movements.
You can remotely cut off fuel or resume fuel supply to the asset using the platform.

Main Features

Specifications

Device Information
- Model: MV720
- Weight: 53g
- Dimensions: 31mm(L) 31mm(W) 57mm(H)
Working Parameters
- Working Voltage: DC 9-90V
- Working Current: <30 mA
- Sleep Current: <15 uA
- Battery Capacity: 3.7V 80mAh Lion Polymer battery
- Working Temperature: -20℃ – 75℃
- Working Humidity: 10%-85%RH non-condensing
Cellular Specifications
- Working Frequency: 2G GSM/GPRS: 850/900/1800/1900MHz
  SIM Card: Nano SIM Card
  Cellular Antenna: Built-in
GNSS Specifications
- Positioning Type: GPS+GLONASS+LBS
- GPS Antenna: Built-in
- Cold Start: ≤32 Seconds
- Hot Start: ≤1 Second
- Tracking sensitivity: -162 dBm
- GPS Channels: 64
- Position Accuracy: 5-10m

How to manage the tracker to get online

Step 1: Please get a suitable SIM card from your local place. The SIM card must meet below points:
- It must be compatible with the 2G GSM network
- Please enable SMS, call, internet data traﬃc of the SIM card
- Enable the caller ID display feature
- Remove the PIN code
- Use Nano size SIM card for the tracker
- Please inquire the SIM card provider for the exact correct APN information
Step 2: SIM card installation
Step 3 Wiring
Step 4: Configure APN
Please get the exact correct APN name from local SIM card provider.Take the tracker to a good signal place for operation and configure the APN for it as below:
Note: The APN information is very important, it must 100% correct to match with the sim card of the tracker, if you conﬁgured wrong APN, the tracker also will reply “SET APN ok” but it will can’t get online!
Step 5 Indicator status description

Package Content

GPS Main Unit: x1
Function Cable: x1
Pick: x1
User Guide: x1
Genuine Packing Box: x1

Functions Explanation

Please follow with the quick user guide carefully!

Vibration Alert:
This vibration alert function just work under stationary status. How to use this function:
- Set admin number by this sms command: admin123456+space+mobile number with country code
- Enable the device to enter into arm mode by this sms command: 111
- Conifgure the alarm ways by this sms command: vibalm123456
- Keep the device under stationary status more than 5min to let it enter into sleep arm mode;
- Vibrate the device then the tracker will send the vibration alarm messages
Cut Off Fuel/Resume Fuel
- Set admin number by this sms command: admin123456+space+mobile number with country code
- Send this sms command from the admin number to cut off fuel:555
  NOTE :About the cut off fuel function, firstly please make sure the fuel circuit is connecting to main power. Secondly, it has 3 different performance, please read it carefully:
- If the network signal and satellite signal both are available, when the equipment speed exceeds 20km/h, the fuel circuit will not be cut off immediately, it will cut off intermittently till the speed is below 20km/h, then just can be completely cut off.
- In the tracker has network signal and but no satellite signal, the fuel circuit will be cut off intermittently, after 2, 3 minutes it will be cut off completely;
- If the tracker stopped more than 5 minutes, the fuel circuit will be cut off immediately, and then connected, but if you vibrate the tracker or vibrate the tracker the fuel cirsuit will be cut off immediately;