MiCODUS ML300G Rastreador 4G GPS Mini Localizador User Manual
- June 13, 2024
- MiCODUS
Table of Contents
- MiCODUS ML300G Rastreador 4G GPS Mini Localizador
- Main Features
- Specifications
- Activate Device
- Package Content
- Functions Explanation
- Installation Recommendation
- Trouble Shooting
- Full SMS Commands List
- Alarm Setting Commands
- After-sale Contact Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MiCODUS ML300G Rastreador 4G GPS Mini Localizador
Main Features
Specifications
Activate Device
First Step: Prepare and Install a SIM Card
- If use your local SIM card, please make sure the SIM card already enabled SMS, internet data traffic, call, and caller ID displaying functions;
- If use our Spionlink SIM card, then please recharge it via this website www.spionlink.com to get a data plan first.
Second Step: Configure APN
Please get the exact correct APN name from the local SIM card provider. Take
the tracker to a good signal place for operation and configure the APN for it
as below:
Note: The APN information is very important, it must be 100% correct to match with the sim card of the tracker, if you configured the wrong APN, the tracker also will reply “SET APN ok” but it won’t get online!
Package Content
- ML300G Tracker: × 1
- USB Charging Cable: × 1
- User Guide: × 1
- Packing Box: × 1
Functions Explanation
Voice Monitor
- Set up a center number for the device:
- CENTER,A, CENTER NUMBER#
- For example, if you want to set up this number as the center number: +8613366668888, the command should be sent like this:
- CENTER, A, +8613366668888#
Note: Please put the country code as a prefix with the center number!
- Use the center number to set up a number for the tracker to call back: MONITOR, number for monitor#
- For example, if you send this command:
- MONITOR, +8613366668888#, then the tracker will make a call to this number +8613366668888 and this number can pick up the call to monitor the voice around it.
Set Working Mode
- Command format: MODE,A, T1,T2#
- For example: Realtime Tracking Mode:
- MODE, 1,10,3600#
- This means the tracker will upload every 10 seconds when it is moving, and every 3600 seconds when it is static.
- For example: Power Saving Mode:
- MODE,2,0800,1#
- This means the tracker will enter into power saving mode at 08:00am and upload every 1 hour. If now is 09:00 am, then the tracker will enter power saving mode at 08:00 am tomorrow.
- For example: Hibernation Mode: MODE,3,0800,1 #
- This means the tracker will enter into power saving mode at 08:00 am and upload every 1 hour.
- Note: The difference between mode 2 and mode 3 is that, under mode 2, the device can be waked up by sms, call, and light sensor, under mode 3 the device will just can be waked up by light sensor.
Vibration Alarm
- Set up a center number for the device:
- CENTER,A, CENTER NUMBER#
- For example, if you want to set up this number as the center number: +8613366668888, the command should be sent like this:
- CENTER.A.+8613366668888#
- For example
- Note: Please put the country code as a prefix with the center number!
- Set up SOS contact numbers:
- SOS,A,SOS1,SOS2,SOS3#
- For example, SOS, A,+8613366667777, +8613366667778,+8613366667779#
- Note: You can set up 3 SOS alarm numbers for the device at the same time
- Set up the vibration alarm way: SENALM, ON,2#
Installation Recommendation
- Driving seat sundries box
- Front bumper
- Driving sundries box
- Under the chassis
- Rear windscreen
- Rear bumper
Trouble Shooting
Full SMS Commands List
Query Commands
Setting Commands
Alarm Setting Commands
After-sale Contact Information
- E-mail: support@micodus.com
- Skype: MiCODUS
Download APP
Search “MiCODUS” in the iOS APP store or Google Play Store, or just scan the
QR code below to download the MiCODUS APP:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>