MiCODUS 4G MP80G Tracker User Manual

: October 30, 2023
: MiCODUS

Table of Contents

MiCODUS 4G MP80G Tracker
Main Features
Specifications
Product Stucture
How to manage the tracker to get online?
Package Content
Functions Explanation
Full SMS Commands List
Troubleshooting
Any Questions?
Download the APP
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MiCODUS 4G MP80G Tracker

Product Information – R4G MP80G User Manual V1.0

The R4G MP80G is a compact and waterproof tracker that supports 4G LTE, 2G GSM, GNSS, WiFi, and LBS technologies. It provides real-time tracking and track playback features. The device has a 700mAh battery and comes with firmware that supports remote
upgrade. It has an IPX7 rating and supports magnetic charging. It also comes with additional features like activity monitor, electronic fence alarm, find pet by sound and light, and low power alarm. The device comes with free tracking software.

Main Features:

Compact Size
4G LTE+ 2G GSM
GNSS+ WiFi+LBS
Real-time Tracking
Track Playback
700mAh
Waterproof
Firmware
IPX7
Remote Upgrade
Magnetic Charge
Activity Monitor
Electronic Fence Alarm
Find Pet by Sound Light
Reply Google Maps Link After Calling
Network Blind Area Data Re-uploading
Low Power Alarm
Free Tracking Software

Specifications:

Device Information:

Model: MP80G
Weight: 42.2g
Dimensions: 75.8mm(L)37.6mm(W)19mm(H)
Battery: Built-in 3.7V 700mAh Polymer
Battery
Working Voltage: 3.4-4.5V DC
Working Current: 12V/Average 60mA
Sleep Current: 12V/Average 5mA
Working Temperature: -20 – 75
Working Humidity: 10%-85%RH
SIM Card: Nano SIM
Celluar Antenna: Built-in, FPC

Celluar Specifications:

Working Frequency: 2G GSM/GPRS:
850/900/1800/1900MHz, 4G LTE CAT1: LTE-FDD:
B1/B2/B3/B4/B5/B7/B8/B28/B66

GNSS Specifications:

GNSS GPS Frequency: BDS Frequency
Satellite Channels: Hot/Cold Start
GNSS Antenna: Built-in, FPC
Positioning Type: Accuracy

External Interfaces:

Magnetic Charge Port
Buzzer
Led Indicator

Product Usage Instructions:

To start using your R4G MP80G tracker, follow the steps below:

Insert a Nano SIM card into the device’s SIM card slot.
Charge the device using the magnetic charging port.
Download the free tracking software provided with the device and install it on your smartphone or computer.
Configure the device settings using the tracking software. You can set up real-time tracking, track playback, electronic fence alarm, and other features.
Attach the device to the object that you want to track, using the provided accessories like a collar or keychain.
The device will start sending location data to the tracking software, and you can monitor the location of your object in real time.

Note: The device supports 2G GSM/GPRS and 4G LTE CAT1 networks.
Make sure to check network coverage in your area before using the device.

4G MP80G User Manual V1.0
Learn how to set up your new MiCODUS Tracker

Main Features

Specifications

Device Information

| Model| MP80G
---|---|---
Weight| 42.2g
Dimensions| 75.8mm(L)37.6mm(W)19mm(H)
Battery| Built-in 3.7V 700mAh Polymer Battery

Working Parameters

| Working Voltage| 3.4-4.5V DC
Working Current| 12V/Average 60mA
Sleep Current| 12V/Average 5mA

-20℃ – 75℃

Working Temperature|
Working Humidity| 10%-85%RH

Celluar Specifications

| SIM Card| Nano SIM
Celluar Antenna| Built-in, FPC

Working Frequency

| 2G GSM/GPRS: 850/900/1800/1900MHz
4G LTE CAT1:

LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66

GNSS Specifications

Accuracy

| Location accuracy: <10m（1σ）
Timing accuracy: <30ns（1σ）
Speed accuracy: <0.1m/s（1σ）

External Interfaces

| Magnetic Charge Port| 1 Channel
Buzzer| 1 Channel
Led Indicator| Charge(Red), GPS(Blue), Celluar(Yellow), Seeking Pet(White)

Product Stucture

How to manage the tracker to get online?

Step 1
SIM card requirements

Please get a suitable SIM card from your local place. The SIM card must meet below points:

It must be compatible with the 4G LTE or 2G GSM network
Please enable SMS, call, internet data traffic of the SIM card
Remove the PIN code
Enable the caller ID display feature
Use Nano size SIM card for the tracker
Please inquire the SIM card provider for the exact correct APN information

Step 2
SIM card installation

Step 3
Configure APN

Please get the exact correct APN name from local SIM card provider.Take the tracker to a good signal place for operation and configure the APN for it as below:

SMS Command Format	Reply	Example	Note

APN,ApnName,User, Password#

|

SET APN OK

|

APN,orange, orange,orange#

|

If the SIM card has APN user and APN password, then use this command.

APN,ApnName#

|

SET APN OK

|

APN,internet#

| If the SIM card operator doesn’t have APN user and APN password, then please use this command.

Note: The APN information is very important, it must 100% correct to match with the sim card of the tracker, if you configured wrong APN, the tracker also will reply “SET APN ok” but it will can’t get online!

Step 4 Indicator status description

LED

|

Event

|

State

---|---|---

POWER LED (RED)

| Charging| Solid
Fully charged/Ran out of battery| Dark

CELL LED (YELLOW)

| Searching and registering network| Flash every 2 seconds
Registered network successfully| Solid
Celluar module sleep or turn off|

Dark

GPS LED (BLUE)

Flash fastly

Package Content

GPS Main Host x 1
Collar x 1
Charging cable x 1
Screwdriver x 1
Rubber clip x 1
User Guide x 1
Genuine Packing Box x 1

Functions Explanation

Working Modes Setting

SMS command format: MODE, A, T1, T2#
A=1/2/3, 1: Realtime tracking mode 2: Regular
reporting mode 3: Power saving mode; Default mode: 1

A=1 (For example: MODE,1,10,3600# means the tracker will work under mode 1, it will upload every 10s under moving status and 3600s under static status)
T1：upload interval of GPS data in moving status,unit: second,10-3600s; default: 10s
T2：upload interval of GPS data in static status, unit: second, 180-86400s; default: 3600s

NOTE:

Device sends data to server according to the time interval and always stays online.
User needs to set reporting time to server when moving and when no moving. GPS/WIFI on when moving and off when not moving.

A=2 (For example: MODE,2,0800,1# means the tracker will work with mode 2 since the 08:00am, and upload every 1 hour )
T1: interval start time,format: HHMM
T2: time interval,range: 1-72 unit: hour,default interval: 24hours

NOTE:
Under Mode 2 the device will disconnect with server after reporting, but it still can receive SMS and Call.

A=3 (For example: MODE,3# )

NOTE:

Under mode 3, no need set reporting time interval, the device will always keep connect with server with the heartbeat data.
Device only sends data to server when an alarm occurs.
GPS/WiFi only triggers when there is an event. (the rest of the time, GPS is off)

Full SMS Commands List

Query Commands

Query Commands

Functions| Command Format| Explanation

Version Inquiry

|

VERSION#

| Device Reply Example： ID: ID number of the tracker

IMEI: IMEI number of the tracker

ICCID: The ICCID number of the SIM card in the tracker VERSION: The firmware version of the tracker

Parameter Inquiry

|

PARAM#

| Device Reply Example： ID: ID number of the tracker IMEI: IMEI number of the

ICCID: The ICCID number of the SIM card in the tracker APN: APN name,APN user,APN password,

IP: Domain name and port number or IP address,port pumber MODE: Working mode;interval or starting time,upload interval SPEEDLIMIT: The overspeed threshold

CENTER: Center number of the tracker SOS: SOS1,SOS2,SOS3

GMT: Time zone

Status Inquiry

|

STATUS#

| TRAFFIC: ON/OFF

BATTERY: XX% (Built-in Battery Power Percent) INTERNET: CLOSED (No Network)

FAILED (Connecting Network or Failure) SUCCESS (Connected to Network）

NET: NONE (No GSM Signal) , HIGH / MED / LOW (Signal Strength) 18

GPS: CLOSED (GPS Module Closed), FIXED,N (Positioned and satellite number), UNFIX,0 (Not Positioned yet) SPEED:30KM/H (The current speed of the target)

Alarms Parameters

|

ALARM#

| ID: 19172012644 (Device ID number)

SPEED: ON(OFF); 30km/h(speed limit); alarm ways MOTION: ON(OFF); 300s(static time);alarm ways

NO MOTION: ON(OFF);3600s(static time);alarm ways LOW BATTERY: ON(OFF);alarm ways

FENCE1: ON(OFF), 500m(Radius) , alarm ways FENCE2: ON(OFF), 300m(Radius) , alarm ways FENCE3: OFF

FENCE4: OFF

Latitude&Longitude Inquiry|

WHERE#

| LAT:N23.02930,LON:E114.32180,SPEED:0.00KM/H, DATETIME:2015-05-23 14:39:11

Map URL Inquiry

|

URL#

| http://map.google.com/?q=22.557868,113.935090

<0.0km/h 0.0> <2014-12-12 07:32:13> IMEI:354188047752402

Setting Commands

Setting Commands

Functions| Command Format| Explanation

APN Setting

|

APN,APN name,APN user, APN password#

| Example: APN,CMNET# (if no APN User & APN Password) APN,internet,internet,internet# (if with APN User & APN Password)

Server Setting

Internet Traffic Switch

| TRAFFIC,ON#| OPEN TRAFFIC OK
TRAFFIC,OFF#| CLOSE TRAFFIC OK

Time Zone Setting

| GMT,Time zone orientation,Whole Time Zone[,Half Time Zone]#| Example: GMT,E,8# (if no half time zone) GMT,W,9,30# (if has half time zone)

NOTE: Parameter : E / W; 0 ~ 12; 0/15/30/45

Mileage Statistics

|

MILEAGE,A,B#

| A=ON/OFF, On/Off mileage calculation, default: Off B=0～999999，Mileage initial value , unit：km ; default: 0, mileage return to zero
MILEAGE#| Query current mileage

Add SOS Administrator Number

|

SOS,A,1st number,

2nd number,3rd number#

| Set 3 numbers at a time: SOS,A,13800138000,1380013800 1,13800138002#

Set the first numberseparately: SOS,A,13800138000#

Set the second number separately: SOS,A,,13800138001#

Means to set 3rd number separately: SOS,A,,,13800138002#

Delete SOS Administrator Number

|

SOS,D,1st number,2nd number,3rd number# or SOS,D,1,2,3#

| Directly delete the number: SOS,D,13800138000#

Delete 1st number: SOS,D,1#

Delete 2nd number: SOS,D,2#

Delete the 2nd and 3rd number: SOS,D,2,3#

Add Center Number

| CENTER,A,

center number#

| Example: CENTER,A,+8613800138000#

Note: Please set up the center number with the country code as prefix!

---|---|---

Delete Center Number

|

CENTER,D#

|

DEL CENTER OK

Set Up GEO-Fence

|

FENCE,S,R,LNG,LAT#

| Example:

FENCE,1,500,22.65897,114.985231# ( Means set

up the fence 1 as center dot 22.65897,114.985231, radius 500m )

FENCE,2,300,,# ( Means set up the fence 2 with the center dot as the last GPS fixed position, radius: 300m)

S=1～4, fence serial number R=100-65535m, Radius value LNG=Longtidue of the center dot LAT=Latitude of the center dot

NOTE: 1. Fence only can be setup when the device has GPS signal, if no GPS signal, then reply: Unable to set GEO fence now, please fix the GPS location firstly!

2. User can set with or without coordinates in the command, if without coordinates then it will set up as the last GPS fixed position

Geo-fence Parameters

|

FENCE#

| ID: 19172012644 (Device ID number) FENCE1: 500m(Radius), 22.65897,114.985231(center coordinate) FENCE2: 300m(Radius), 22.65897,114.985231(center coordinate) FENCE3: 400m(Radius), 22.65897,114.985231(center coordinate) FENCE4: 400m(Radius), 22.65897,114.985231(center coordinate)

Delete GEO-Fence

|

DFENCE,S#

| Example:

DFENCE,1# (Means delete the fence 1) DFENCE,0# (Means delete all fence) S=0～4, fence serial number

Search Mode

|

SEARCH#

| Example: SEARCH#

Note: 1. After received this command, device will start live tracking every 10 seconds and last for 10 minutes.

2. When there is an Geo-fence alarm, this search mode will be activated automatically

Buzzer Switch

|

BEEP,A#

| Example: BEEP,ON# BEEP,OFF#

LED Switch

|

LED,A#

| Example: LED,ON# LED,OFF#

Working Mode Setting

|

MODE,A,T1,T2#

| A=1/2/3, 1： Realtime tracking mode 2： Regular reporting mode 3: Power saving mode; Default mode: 1

A=1 (For example: MODE,1,10,3600# means the tracker will work under mode 1, it will upload every 10s under moving status and 3600s under static status)

T1：upload interval of GPS data in moving status,unit: second,10-3600s; default: 10s

T2：upload interval of GPS data in static status, unit: second, 180-86400s; default: 3600s

NOTE: Device sends data to server according to the time interval and always stays online.

User needs to set reporting time to server when moving and when no moving. GPS/WIFI on when moving and off when not moving.

A=2 (For example: MODE,2,0800,1# means the tracker will work with mode 2 since the next 08:00am, and upload every 1 hour )

T1: interval start time,format: HHMM

T2: time interval,range: 1-72 unit: hour,default interval: 24hours

Note: Under Mode 2 the device will disconnect with server after reporting, but it still can receive SMS and Call.

A=3 (For example: MODE,3# )

NOTE: Under mode 3, no need set reporting time interval, the device will always keep connect with server with the heartbeat data.

Device only sends data to server when an alarm occurs. GPS/WIFI only triggers when there is an event. (the rest of

the time, GPS is off)

---|---|---

Heartbeat Packet Upload

|

HBT,time#

| Example: HBT,3# ( Means the tracker will send hearbeat data package to server very 3min to keep the network connected )

Time: 1-60min, default 3min

Alarm Commands
Functions| Command Format| Explanation

Overspeed Alarm Setting

|

SPEED,A,B,M#

|

Example: SPEED,ON,120,1# ( Means the speed limit is 120km/h and the alarm way is via SMS and Server ) A=ON/OFF, open or close over speed alarm, default：OFF B=1～255(km/h), speed limit, default：100(km/h);

M=0/1/2, way of alarm, 0 : SERVER only, 1: SERVER+SMS, 2: SERVER+SMS+CALL; default: 1

SPEED,OFF#

|

CANCEL OVERSPEED ALARM OK

Set Up

GEO-Fence Alarm

|

FENCE,A,S,M#

| Example: FENCE,ON,2,1# ( Means the fence 2 alarm already been enabled, once the device enter or leave the fence 2 the alarm message will be sent via server and SMS)

A=ON/OFF, open or close over speed alarm, default：

OFF

S=1～4, fence number

M=0/1/2, way of alarm, 0 : SERVER only, 1: SERVER+SMS, 2: SERVER+SMS+CALL; default: 1

---|---|---

Cancel

GEO-Fence Alarm

|

FENCE,A,S#

| FENCE,OFF,2# (Means cancel alarm of the fence 2) A=OFF

S=1～4, Fence serial number

No Motion Alarm Setting

|

NMOTION,A,T,M#

| Example: NMOTION,ON,3600,1# ( Means if device doesn’t move (no motion) for 60 minutes, within 61 minutes, the no motion alarm will be activated, device will send alarm message to platform and SMS )

A=ON/OFF, open or close over speed alarm, default：OFF

T=60～36000s, Static time, Unit: second, Default: 3600s ; M=0/1/2, way of alarm, 0 : SERVER only, 1: SERVER+SMS, 2: SERVER+SMS+CALL; default: 1

NMOTION,OFF#

|

CANCEL NO MOTION ALARM OK

Motion Alarm Setting

|

MOTION,A,T,M#

|

Example: MOTION,ON,300,1# ( Means if device doesn’t move for 5 minutes and then start move and lasts for 3 seconds, this motion alarm will be activated and the alarm message will be sent via server and SMS )

A=ON/OFF, open or close over speed alarm, default：OFF

T=60～36000s, static time, unit: second, default: 300s ; M=0/1/2, way of alarm, 0 : SERVER only, 1: SERVER+SMS, 2: SERVER+SMS+CALL; default: 1

MOTION,OFF#| CANCEL MOTION ALARM OK

Low Battery Alarm Setting

|

BATALM,A,M#

|

Example: BATALM,ON,1# ( Means the low battery alarm already been enabled and the alarm message will be sent via Server and SMS )

A=ON/OFF, default：ON; M=0/1/2, way of alarming, 0:

SERVER only, 1: SERVER+SMS, 2: SERVER+SMS+Call,

default:1；

NOTE: Once the battery level is below 20% device will alarm