LAUCO 95127 Ultima Finishing Glaze Instructions

: August 31, 2024
: LAUCO

Table of Contents

95127 Ultima Finishing Glaze
Product Information
Specifications:
Product Usage Instructions:

95127 Ultima Finishing Glaze

“`html

Product Information

Specifications:

Product Name: 95127 Ultima Finishing Glaze (BPO)
Designed for: Eliminating pinholes and surface imperfections
before applying the next painting coat
Formulation: Self-leveling for a smooth ultra-fine finish
Adhesion: Superb adhesion to bare steel, galvanized steel,
aluminum, polyester body filler, and fiberglass

Product Usage Instructions:

SURFACE PREPARATION:

Clean and degrease the entire panel with soap and water,
followed by a mild cleaning solvent. Ensure the surface is
thoroughly dry before repairing. Use 80 grit to remove paint and
feather edges.

APPLICATION & SANDING:

Mix BPO and Hardener in the specified ratio. Follow the gel time
recommendations. Apply in layers with even firm pressure, avoiding
applying all at once. Sanding should be done initially with P180
grit and finally with P180-P240.

REMARKS:

Do not exceed the specified hardener amount
Mix thoroughly before application
Apply in layers with even firm pressure
Do not return mixed filler to the can
Store in a cool, dry place with the can closed

STORAGE:

Store in a cool, dry place with the can closed.

FAQ (Frequently Asked Questions):

Q: Can I apply this product directly on bare steel?

A: Yes, this product has superb adhesion to bare steel.

Q: What should I do if I accidentally add more hardener than

specified?

A: Avoid adding more hardener than specified as it may affect
the product performance. If added, consult a professional for
further guidance.

Q: How should I store the product after use?

A: Store the product in a cool, dry place with the can tightly
closed to prevent drying or contamination.

“`

95127 Ultima Finishing Glaze (BPO)
PRODUCT DESCRIPTION
95127 Ultima Glaze is a premium finishing glaze designed to eliminate pinholes and surface imperfections before move to next painting coat. Its self-leveling formulation produces a smooth ultra fine finish and requires minimal sanding. It has superb adhesion to bare steel, galvanized steel, aluminum,polyester body filler and fiberglass.
TECHNICAL CHARACTERISTICS
Color: turquoise Specific weight: 1.0 kg/l at 20ºC Shelf life of Body Filler : 24 months Shelf life of BPO Hardener: 12 months
SURFACE PREPARATION
Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Use 80 grit to remove the paint and feather edge.
APPLICATION & SANDING

BPO
Hardener

Gel time

10ºC(50) 20oC(68) 30oC(86)

100:3 100:2 100:2

6- 7 4- 6 4- 5

20 15-20
15

Infrared Bake: 50 – 80 cm MAX. T: 80 °C 5 minutes

Sanding: Initial: P180 Final: P180-P240

REMARKS
Do not add more hardener than specified. Mix thoroughly. Apply in layers with even firm pressure,do not apply all at once. Never return mixed filler to can. Keep can closed and store in a cool dry place.

STORAGE
Store the product in a ventilated place far from direct exposure to sunlight. Keep between +5ºC and +30ºC.