MiCODUS ML935 GPS Dog Tracking Device User Manual
- October 30, 2023
- MiCODUS
Table of Contents
- MiCODUS ML935 GPS Dog Tracking Device
- Product Information
- Main Features
- Specifications
- Product Structure
- Functions Explanation
- Product Usage Instructions
- Installation Recommendation
- Troubleshooting
- Package Content
- Functions Explanation
- Installation Recomendation
- Full SMS Commands List
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MiCODUS ML935 GPS Dog Tracking Device
Product Information
The MiCODUS Tracker is a GPS tracking device that provides real-time positioning and historical route playback. It has a 2G Quad Band and waterproof IP65 features. The device also has a 3000mAh backup battery and voice monitor geo-fence. It comes with a free tracking platform for easy management of the tracker. The device is equipped with a built-in GPS+LBS+GPRS and GNSS specifications.
Main Features
- 2G Quad Band
- GPS+LBS Dual Real-time Positioning
- Tracking Historical Route Playback
- 3000mAh Backup Battery
- Waterproof IP65
- Voice Monitor Geo-fence
- Free Tracking Platform
Specifications
- Model: ML935
- Weight: N/A
- Dimensions: N/A
- Charging Time: N/A
- Battery Working Time: N/A
- Working Voltage: N/A
- Working Current: N/A
- Sleep Current: N/A
- Battery Capacity: N/A
- Working Temperature: N/A
- Working Humidity: N/A
- Working Frequency: N/A
- SIM Card: Normal SIM
- Cellular Antenna: Built-in
- Positioning Type: GPS+LBS+GPRS
- GPS Antenna: Built-in
- Cold Start: 32 Seconds
- Hot Start: 1 Second
- Tracking Sensitivity: -162 dBm
- GPS Channels: 64
- Position Accuracy: 5-10m
Device Information
| Model| ML935
---|---|---
Weight| 116g
Dimensions| 94mm(L) 46mm(W) 31mm(H)
Charging Time| Around 7 hours
Battery Working Time| Tracking Mode, 1 minutes’ reporting: 7-15 days
Working Parameters| Working Voltage| DC 3.4V – 4.5V
Working Current| 4V/Average 45mA
Sleep Current| 4V/less than 5mA
Battery Capacity| 3.7V 3000mAh Lion Polymer Battery
Working Temperature| -20℃ – 75℃
Working Humidity| 10%-85%RH non-condensing
Cellular Specifications| Working Frequency| 2G GSM/GPRS:
850/900/1800/1900MHz
SIM Card| Normal SIM Card
Cellular Antenna| Built-in
GNSS Specifications
| Positioning Type| GPS+LBS+GPRS
GPS Antenna| Built-in
Cold Start| ≤32 Seconds
Hot Start| ≤1 Second
Tracking Sensitivity| -162 dBm
GPS Channels| 64
Position Accuracy| 5-10m
Product Structure
The product package includes a GPS main unit, USB charging cable, user manual,
pet collar, and genuine packing box.
Functions Explanation
- Managing Multiple Devices: Register an account on the tracking platform and add all the ID numbers to the account to manage them together.
- Voice Monitor: Set admin number and switch the tracker to voice monitor mode to remotely monitor the voice around it.
Product Usage Instructions
How to Manage the Tracker to Get Online?
Step 1: Please get a suitable SIM card from your local place. The SIM card must meet below points:
Get a suitable SIM card from your local place. The SIM card must meet the following points:
- It must be compatible with the 2G GSM network.
- Please enable SMS, call, internet data traffic of the SIM card.
- Enable the caller ID display feature.
- Remove the PIN code.
- Use Normal size SIM card for the tracker.
- Please inquire the SIM card provider for the exact correct APN information.
Step 2:
The indicator status description:
LED | Yellow Light | Blue Light | Red Light |
---|---|---|---|
Event | No GPRS signal | GPRS connection | No GPS signal |
State | Solid | Flash | Solid, Flash, or Off |
State | Solid | Full charged or ran out of battery | |
LED | Event | State | |
--- | --- | --- | |
Yellow light | No GPRS signal | Solid | |
GPRS connection | Flash | ||
Blue light | No GPS signal | Solid | |
GPS connection | Flash | ||
Red light | Charging | Solid | |
Full charged or ran out of battery | Off |
Step 3:
Configure APN:
-
Get the exact correct APN name from the local SIM card provider.
-
Take the tracker to a good signal place for operation and configure the APN for it as below:
-
SMS Command Format: apn123456+space+apn name
-
Reply: apn ok
-
Example: apn123456 cmnet
-
Note: Please get the exact correct APN name from the local SIM card provider. cmnet is just an example of APN name.
-
SMS Command Format: apnuser123456+space+apnuser
-
Reply: apnuser ok
-
Example: apnuser123456 cmnet
-
Note: lf the SIM card operator doesn’t have APN user name, then
please ignore this configuration. -
SMS Command Format: apnpasswd123456+space+apnpassword
-
Reply: apnpasswd ok
-
Example: apnpasswd123456 123
-
Note: The APN information is very important, it must be 100% correct to match with the sim card of the tracker, if you configured the wrong APN, the tracker also will reply SET APN ok, but it will not get online.
-
Please get the exact correct APN name from local SIM card provider.Take the tracker to a good signal place for operation and configure the APN for it as below:
SMS Command Format | Reply | Example | Note |
---|---|---|---|
apn123456+space+ apn name | apn ok | apn123456 cmnet | Please get the exact |
correct APN name from local SIM card provider.“cmnet” is just an example of
APN name.
apnuser123456+ space+apnuser| apnuser ok| apnuser123456 cmnet| lf the SIM card
operator doesn’t have APN user name, then please ignore this configuration
apnpasswd123456+ space+apnpassword| apnpasswd ok| apnpasswd123456 123
Note: The APN information is very important, it must be 100% correct to match with the sim card of the tracker, if you configured wrong APN, the tracker also will reply “SET APN ok” but it will can’t get online!
Installation Recommendation
Troubleshooting
- Fail to turn it on: Please check if the battery is charged.
- No GSM signal or No GPS: N/A
Type | Use |
---|---|
Fail to turn it on | Please check if battery is charged. |
No GSM signal |
- Please check if SIM card installed correctly.
- Please check if SIM card is GSM network.
- Don’t turn on the PIN code.
- No calls can bediverted.
No GPS| A more open view of the sky is recommended to make sure the device can
receive the GPS signal normally.
No reply to SMS command| Password wrong or the format is wrong.
No reply to calling & No alarm message| Authorized / admin phone number is
incorrect or has not setup.
SMS position OK, cannot use the APP and web platform.| Pls check if APN is
correctly set. And pls find out the correct APN content of the SIM card.
Platform position is difference from the actual position.|
- The GPS doesn’t have GPS signal and it shows the last GPS positioning location
- The GPS doesn’t reach the next uploading time
You can call the SIM number of the tracker to get the latest position
Package Content
- GPS Main Unit × 1
- USB Charging Cable × 1
- User Manual × 1
- Pet Collar × 1
- Genuine Packing Box × 1
Functions Explanation
-
How to manage multiple devices together in one account?
- Firstly you need register an account on the tracking platform
- Click”+ “icon to add all the ID numbers in the account and then you will can manage them together
-
Voice Monitor:
-
Set admin number by this sms command:
admin+123456+space+admin number with country code -
Switch the tracker to voice monitor mode by this sms command:monitor123456
-
Dial the sim number of the tracker from the admin number, then the tracker will pick up the call automatically and you will can remote monitor the voice around it.
-
For example:
Installation Recomendation
Full SMS Commands List
Functions | Command Format | Explanation |
---|---|---|
GPRS | GPRS+123456 | Open GPRS |
noGPRS+123456 | Shut GPRS | |
Set APN | apn+123456+apn content | Set APN (old one will be replaced) |
APN user | apnuser+123456+space+content | Set APN username (If without, please |
ignore)
APN password| apnpasswd+123456+space+content| Set APN password (If without,
please ignore)
Set authorized number| admin+123456+space+number| Set authorized number, only
these numbers can control the unit
noadmin+123456+space+number
Set password| password+old 123456+space+ new 123456| Set password
Retrieve password| cpwd|
Timezone| timezone+123456+space+GMT No.| Set GMT time zone number. (default:
0)
Monitor mode| monitor123456| Switch to the monitor mode. You will hear sounds
near the unit after you call it
Tracking mode| tracker123456| Switch to the tracking mode, you will get geo-
info after you call it
SMS Tracker| G+123456#| Latitude & longitude query
Sleep mode| sleep+123456+space+time; sleep+123456+space+time10 (Change
interval time)| Efault mode-save much power, tracker will fall asleep in 5
minutes (default: 5 minutes)
sleep+123456+space+shock; sleep+123456+space+shock10 (Change interval time)|
Tracker will enter sleep mode after detect no shock in 5 minutes
sleep+123456+space+off| Tracker will continue working
Upload command| upload+123456+space+15(Ranged: 10-43200)| Upload information
every 15 second (default: 120 seconds)
Shock alert| shock+password| Arm
noshock+password| Unarm
Vibrator sms alarm on/off| vibalm123456| Defaulted:ON
novibalm123456|
Query parameters| check123456|
---|---|---
Adminip| adminip+123456+space+ip+space
+port| Set Home IP and Port of the server, and update gps info by cell id
noadminip+123456+space+ip+ space+port
Restore to factory| begin+123456| Restore to factory
Any Questions?
E-mail: support@micodus.com
Skype: MiCODUS
Download the APP
Search “MiCODUS” in iOS APP store or Google Play Store, or just scan the QR
code as below to download MiCODUS APP:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>