MiCODUS MV730 GPS Tracker User Manual

MiCODUS MV730 GPS Tracker

Product Information

The MiCODUS Tracker MV730 is a GPS tracking device that can be remotely controlled. It is equipped with GLONASS+LBS technology, vibration sensors, and can detect ACC status. It has a wide working voltage range of 9-90V and can resume fuel. The device can track historical and real-time routes, has a tow alarm and power disconnect alarm, and can set up a geo-fence. It also has an engine on/off alarm and can automatically arm by ACC. The device has an overspeed alarm and a lifetime free tracking platform.

Main Features

• GPS+GLONASS+LBS Positioning Type
• Remotely Cut Off Engine On/Off
• Historical Route Playback
• Real-time Tracking
• 9-90V Wide Working Voltage Range
• Vibration Sensors
• Resume Fuel
• ACC Status Detection
• Tow Alarm
• Power Disconnect Alarm
• Geo-fence ON/OFF
• Auto Arm by ACC
• Overspeed Alarm
• Lifetime Free Tracking Platform

Specifications

Device Information

• Model: MV730
• Weight: 53g
• Dimensions: 31mm(L) 31mm(W) 57mm(H)

Working Parameters

• Working Voltage: DC 9-90V
• Working Current: N/A
• Sleep Current: N/A
• Battery Capacity: N/A
• Working Temperature: N/A
• Working Humidity : N/A
• Working Frequency: N/A

Cellular Specifications

• SIM   Card: N/A

GNSS Specifications

• Positioning Type: GPS+GLONASS+LBS
• GPS Antenna: Yes
• C old Start: N/A
• Hot Start: N/A
• Tracking Sensitivity: N/A
• GPS Channels: N/A
• Position Accuracy: N/A

Product Usage Instructions

To set up the MiCODUS Tracker MV730, follow these steps:

1. Ensure the device is connected to a power source within the working voltage range of 9-90V.
2. Insert a SIM card into the device.
3. Place the device in an appropriate location within your vehicle or asset.
4. Download the tracking platform app and register for an account.
5. Log in to the tracking platform app and add the device by entering its unique ID number.
6. You can now track the device’s location in real-time and view historical routes.
7. You can also remotely cut off the engine, set up a geo-fence, and receive alarms for ACC status, tow, power disconnect, overspeed, and more.

Main Features

Specifications

• Device Information

  • Model: MV720
  • Weight: 53g
  • Dimensions: 31mm(L) 31mm(W) 57mm(H)

• Working Parameters

  • Working Voltage: DC 9-90V
  • Working Current: <30 mA
  • Sleep Current: <15 uA
  • Battery Capacity: 3.7V 80mAh Lion Polymer battery
  • Working Temperature: -20℃ – 75℃
  • Working Humidity: 10%-85%RH non-condensing

• Cellular Specifications

  • Working Frequency: 2G GSM/GPRS: 850/900/1800/1900MHz 
    SIM Card: Nano SIM Card 
    Cellular Antenna: Built-in

• GNSS Specifications

  • Positioning Type: GPS+GLONASS+LBS
  • GPS Antenna: Built-in
  • Cold Start: ≤32 Seconds
  • Hot Start: ≤1 Second
  • Tracking sensitivity: -162 dBm
  • GPS Channels: 64
  • Position Accuracy: 5-10m

How to manage the tracker to get online?

• Step 1: Please get a suitable SIM card from your local place. The SIM card must meet below points:

  • It must be compatible with the 2G GSM network
  • Please enable SMS, call, internet data traffic of the SIM card
  • Enable the caller ID display feature
  • Remove the PIN code
  • Use Nano size SIM card for the tracker
  • Please inquire the SIM card provider for the exact correct APN information

• Step 2: SIM card installation

• Step 3 Wiring

NOTE: : After installed SIM card correctly , it is very important to connect the tracker with external power no less than 12V for power supply before operation!

• Step 4: Configure APN
  Please get the exact correct APN name from local SIM card provider.Take the tracker to a good signal place for operation and configure the APN for it as below:

Note: The APN information is very important, it must 100% correct to match with the sim card of the tracker, if you configured wrong APN, the tracker also will reply “SET APN ok” but it will can’t get online!

• Step 5 Indicator status description

Package Content

• GPS Main Unit x1
• Function Cable x1
• Pick x1
• Harness x1
• User Guide x1
• Genuine Packing Box x1

Functions Explanation

Please follow with the quick user guide carefully!

• Vibration Alert:
  This vibration alert function just work under stationary status. How to use this function:

  • Set admin number by this sms command: admin123456+space+mobile number with country code

  • Enable the device to enter into arm mode by this sms command: 111

  • Conifgure the alarm ways by this sms command: vibalm123456

  • Keep the device under stationary status more than 5min to let it enter into sleep arm mode;

  • Vibrate the device then the tracker will send the vibration alarm messages

• Cut Off Fuel/Resume Fuel

  • Set admin number by this sms command: admin123456+space+mobile number with country code
  • Send this sms command from the admin number to cut off fuel: 555
    NOTE :About the cut off fuel function, firstly please make sure the fuel circuit is connecting to main power. Secondly, it has 3 different performance, please read it carefully:

  * If the network signal and satellite signal both are available, when the equipment speed exceeds 20km/h, the fuel circuit will not be cut off immediately, it will cut off intermittently till the speed is below 20km/h, then just can be completely cut off.
  * In the tracker has network signal and but no satellite signal, the fuel circuit will be cut off intermittently, after 2, 3 minutes it will be cut off completely;
  *  If the tracker stopped more than 5 minutes, the fuel circuit will be cut off immediately, and then connected, but if you vibrate the tracker or vibrate the tracker the fuel cirsuit will be cut off immediately;

• Engine On/Off Alarm
  • Set admin number by this sms command: admin123456+space+mobile number with country code
  • Configure the alarm ways via this sms command: autorep123456,AB
  • A=0 (Engine ON : No Alarm);
  • A=1 (Engine ON: SMS only);
  • A=2 (Engine ON: Platform only);
  • A=3 (Engine ON: SMS+Platform)
  • B=0 (Engine OFF: No Alarm);
  • B=1 (Engine OFF: SMS only);
  • B=2 (Engine OFF: Platform only);
  • B=3 (Engine OFF: SMS+Platform)

Installation Recomendation

1. The decice should face up to the sky.
2.  Metal therma barrier of heating layer of the windshield affects the signal.

Troubleshooting

Full SMS Commands List

Any Questions?

• E-mail: [email protected]
• Skype: MiCODUS

Download the APP

Search “MiCODUS” in iOS APP store or Google Play Store, or just scan the QR code as below to download MiCODUS APP:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>