milleteknik A-0000000ADP01 Adapter FLX to Battery Shelf User Guide
- June 15, 2024
- Milleteknik
Table of Contents
milleteknik A-0000000ADP01 Adapter FLX to Battery Shelf
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS: ADAPTER FLX TO BATTERY SHELF
Adapter FLX to Battery Shelf is an adapter cable to be able to use a power supply from Milleteknik, (NEO, NOVA or EN54-FLX M) together with the battery shelf Battery Shelf 24V M or Battery Shelf 24V M.
Safety – the risk of accessing the battery terminals
- The product must be installed in a locked and protected indoor environment. Risk of access to battery terminals
- Only authorized persons should install and maintain the system.
- It is the installer’s responsibility that the system is suitable for intended use.
- Documents accompanying the system must be stored in it or in its immediate vicinity.
- The mains voltage should be disconnected during installation.
Connecting to battery backup
Battery backup must be de-energized during installation and connection.
- The cable entry is on the underside of the battery backup and must be disconnected before assembly. Loosen any tensioning straps around the batteries to access the cable entry from the floor of the unit.
- Connect the white socket of the Adapter FLX to the Battery Shelf in the battery backup, see image below.
- Connect batteries with the truck glove on adapter FLX to the Battery Shelf.
- Power up battery backup.
Connecting Battery Shelf 24V M / Battery Shelf 24V L for battery backup The battery shelf must be mounted in the rack before batteries are placed on it.
- Connect the connector on Adapter FLX to battery shelves, green circle.
- Connect batteries.
- 3. Switch on the circuit breaker, yellow circle.
| Color | Explanation |
|---|---|
| Green circle | Connector |
| Yellow circle | Automatic fuse |
| Red circle | Connection for fuse to motherboard in battery backup, (not yet in |
use).
Technical data
Technical data
Product description| The adapter should be used when you want to connect a
battery shelf to NEO / NOVA / EN54 FLX M battery backups. NEO / NOVA / EN54
FLX M has a 9-pin connector for connection to the battery box as standard. The
adapter has a truck glove on one end of the cable and a 9-pin connector on the
other end of the cable for easy pairing.
Item number| A-0000000ADP01
E-number (sv)| 5257447
Recommended environment| Environmental class 1, Indoor, 20% ~ 90% relative
humidity
The product meets the requirements ac- according to| EMC Directive 2014/30EU,
Low Voltage directive: 2014/35/EU CE directive according to 765/2008,
Emission: EN61000-6-:2001,
EN55022:1998:-A1:2000, A2:2003 Class B, EN61000-3 -2:2001. Im-
munity: EN61000-6-2:2005, EN61000-4-2, -3, 4, -5, -6, -11.
Guarantee| 2 years
Manufacturer| Milleteknik AB
Country of origin| Sweden
This document is subject to change without notice. This translation is not verified and should be cross-referenced with the Swedish original before use. All information is published subject to typographical errors.
ABOUT TRANSLATION OF THIS DOCUMENT
The user manual and other documents are in the original language in Swedish.
Other languages are machine-translated and not reviewed, errors may occur.
Address and contact details
- S-433 30 Partille
- +46 31 340 02 30
- www.milleteknik.com