Ronix RH-4307 12l High Pressure Air Grease Injector Instruction Manual

Ronix RH-4307 12l High Pressure Air Grease Injector Instruction Manual

TECHNICAL SPECIFICATIONS

4m×6mm ×16mm high pressurerubber hose; 1PC-30cm gun hose 1PC-pointed type nozzle1set-repair kit

**PART LIST

**

GENERAL POWER TOOL SAFETY WARNINGS

WARNING!

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and or serious injury.
• Save all warnings and instructions for future reference.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Don’t operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
•  Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRIC SAFETY

• Power tool plugs must match the outlet.
• Avoid body contact with earthed or grounded surfaces such as pipe, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Don’t abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increased the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Using a cord suitable for outdoor use will reduce the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Don’t use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Don’t overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Don’t wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose cloths, jewelry or long hair can be caught in moving parts.

WARNING!
Do not make any modifications to the device and only use it for its intended purpose. Improper use or modification might lead to property damage and personal injury.
Caution!
Danger of slipping due to lubricants. Immediately remove spilled or leaked lubricant and dispose of it properly. Lubrication material are toxic and leaking lubricant can cause environmental damages!

Device USE AND CARE
Ronix high-pressure grease injector uses compressed air as drive, the pump creates the high-pressure by pressing the grease, and the oil injected by the high pressure.
The grease injector is becoming an essential equipment due to the need for lubrication industrialization.
Its features are good reliability, low air consumption, high working pressure, convenient usage, high efficiency of production, capability of injecting grease of high viscidity. Applying in automobile, tractors, and other dynamic machines’ grease injection aspects.
This machine can be used all year round Normal in .

• In winter use grease grade 0 and 1 lithium grease.
• In spring use grease grade 2 lithium grease.
• In summer use grease grade 2 and 3 lithium grease.
  In order to avoid oil viscosity too hard, you can add a little engine oil and mix thoroughly

Caution:

• Recommended temperature range: between -20 and 120 Celsius .
• Recommended humidity range: between 20% and 80%.
  The lithium grease used is made of higher fatty acid lithium soap thickening medium viscosity mineral oil added antioxidant and anti-rusting agents. It has good performance in water resistance, mechanical stability, oxidation stability and rust protection

NLGI Grade| NLGI Grade| Fluid

Very Hard
---|---|---
000| 445-475
00| 400-430
0| 355-385
1| 310-340
2| 265-295
3| 220-250
4| 175-205
5| 130-160
6| 85-115

Machine noise at work is around 90Db

APPLICATIONS
grease inject called pressure ratio
The grease injector pump is combined with an upper air pump and lower plunger piston pump for compressing grease.
Air pump is the driving pump of plunger piston pump; compressed air is used to drive the plunger piston pump in reciprocating motion for grease inlet grease outlet and creating the grease pressure. Because the valid area of the piston of the cylinder is bigger than that of the cylinder of plunger piston pump, so pressure can be greatly enhanced, the valid area ratio is 50:1(it is called pressure ratio).
When 0.6Mpa compressed air is inputted, the output grease pressure can reach 30 Mpa.

Operation theory
The driving force of plunger piston pump is coming from the air pump, connected with the connecting pole, and have reciprocating motion with the air pump synchronously, in the motion, grease is inhaled and output high pressure. replace working position
When grease pump replace working position through horizontal short distance, it would depend upon the two wheels to carry on the migration;
When grease pump replace working position through long distance, first  the grease should be poured out of the container. The grease should transport alone.
Transportation
Before transportation, the grease must be removed from grease pump should be bonded in order to prevent the movement bringing the danger or damage.
Storage
Before storage, firstly you should recycle the grease in the container, then wash the container, clean the Pump body and pipelines with cleaning oil. After cleaning, you should make it dry then it will get a long service life Storage condition The clean grease pump should be put on the dry, ventilated condition to, it should be avoid high temperature, solarization or inflammable gas .

Troubleshot

season: 1–2 times in winw ter, 2 times in spring and autumn, and 2–3times in summer.
d) Dirty valve| Remove dirt.
e) Not enough grease incone tainer| **** Top up with grease.

www.ronixtools.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>