VEVOR HRAT24A Speed Sandbag User Manual
- June 15, 2024
- VEVOR
Table of Contents
VEVOR HRAT24A Speed Sandbag
NEED HELP?
CONTACT US!
Have product questions?
Need technical support? Please feel free to contact
us:CustomerService@vevor.com
IMPORTANT
Be sure to review the contents of this manual before attempting to operate the
equipment. This manual should be located where all machine users can easily
reference it.
IMPORTANT PRECAUTIONS
FOR HOUSEHOLD USE ONLY
WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS.
SAVE THESE INSTRUCTIONS
Read all instructions before using this Treo Boxing Stand. It is the
responsibility of the owner to ensure that all users of this Boxing Stand are
adequately informed of all warnings and precautions.
- Close supervision is necessary when this Boxing Stand is used by, on, or near children or disabled persons.
- Use this appliance (or Boxing Stand) only for its intended use as described in this manual. Do not use heavy bags weighing more than 50kg.
- Never drop or insert any object into any hole.
- The Boxing Stand is intended for home use only. Do not use this Boxing Stand in any commercial, rental, school or institutional setting. If you don’t comply with this, the warranty will expire.
- Do not use outdoors.
- Keep the Treo Boxing Stand indoors, away from moisture and dust.
- Place the Treo Boxing Stand on a levelled surface, with a mat beneath it to protect the floor or carpet.
- Make sure that there is enough clearance around the Treo Boxing Stand to mount, dismount, and use the Treo Boxing Stand.
- Keep hands and feet away from moving parts.
At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.
PART LIST
| No. | Part Name | Q’ty | No. | Part Name | Q’ty | |
|---|---|---|---|---|---|---|
| 1 | Rear Base Tube | 1 | 17 | Bolt M10*65 | 9 | |
| 2 | Side Base Tube | 2 | 18 | Bolt M10*60 | 2 | |
| 3 | Upright Tube | 1 | 19 | Nut M10 | 17 | |
| 4 | Front Base Tube | 2 | 20 | Flat Washer M6 | 4 | |
| 5 | Heavy Bag Tube | 1 | 21 | Spring Washerφ6 | 4 | |
| 6 | Speed Bag Platform Rack | 1 | 22 | Screw M6*30 | 4 | |
| 7 | Support Bar (Right) | 1 | 23 | Bolt M10*70 | 4 | |
| 8 | Support Bar (Left) | 1 | 24 | Bolt M10*50 | 1 | |
| 9 | Weight Peg | 4 | 25 | Eye Bolt M10*120 | 1 | |
| 10 | Horizontal Support Bar | 1 | 26 | Big Washer M10 | 1 | |
| 11 | U-type Connecting Plate | 2 | 27 | Foot Cap 45*45 | 4 | |
| 12 | Speed Bag Swivel | 1 | 28 | Outside Plug 50-45 | 1 | |
| 13 | Speed Bag Platform | 1 | 29 | Plug 38*38 | 1 | |
| 14 | Pop Pin | 1 | 30 | Plug 45*45 | 1 | |
| 15 | Flat Washer M10 | 34 | 31 | Plug φ25 | 4 | |
| 16 | Bolt M10*150 | 2 | 32 | Speed Ball | 1 |
The parts In red serial numbers are pre-assembled by the manufacturer. 03
DRAWING ASSEMBLY
Step 1
Step 2
Step 3
PHYSICAL ASSEMBLY
Step 1: Install the base (Parts 1, 2, 3, 4).
Step 2: Install the Speed Ball (Parts 12, 13, 32) attached to the Center Tube (Parts 5, 6, 14).
Step 3: Connect to the base and centre tube (Parts 11), and install the support bar and weight hook (Parts 7, 8, 9, 10, 25 ).
E-mail: CustomerService@vevor.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>