My CrossWave® / CrossWave® Pet Pro has No Spray | Support
- June 7, 2024
- Bissell
Table of Contents
If experiencing No/Low Spray, follow these steps to resolve:
*The trigger on handle must be held in order for machine to produce spray
-
Clean water tank on back of the machine should be full
- Clean water tank should be sitting flush with the machine
-
Remove tank and firmly push it back into place
-
Plug machine in with a full clean water tank
-
Hold the spray trigger down for 10-15 seconds and test for spray
-
Is there spray?
- Yes > Great! Glad we could get you back to cleaning!
- No > Unplug machine and remove water tank
- Inspect water tank for cracks and leaks
- If your tank is leaking or damaged, a new one should be ordered > Go to Parts & Supplies
-
With water tank still removed, check for cracks on cap and rubber gasket
- If your cap or gasket is damaged, a new one should be ordered > Go to Parts & Supplies
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Go to Brush Roll and Nozzle
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>