All American TQB4050 Proxima Auto Dual Heat Press User Manual
- June 4, 2024
- All American
Table of Contents
All American TQB4050 Proxima Auto Dual Heat Press User Manual
Installation
- Requires air hose with 5mm inner diameter & 8mm outer diameter.
- Requires air compressor with minimum 1.5kw, 50L hold tank, and 0.7M pa
Control Panel
| Press SET button one time to start adjusting the temperature. Press it again to adjust the time. Press it for the third time to exit the setting interface.
Press and hold SET button to enter the parameter setting interface. Press and hold SET button again or power off the machine to exit parameter setting interface.
---|---
| **** Press this key to decrease the corresponding parameter value after the
machine enters the parameter setting interface.
| Press this key to increase the corresponding paramater value after the
machine enters the parameter setting interface. Press and hold this key to
start self-tuning (°C or °F symbol on the panel will begin blinking). Once the
machine begins self-tuning, do not unplug or press any key until self-tuning
has finished (°C or °F symbol stops blinking).
NOTE: Before applying self-tuning, set temperature to normal working temperature and let the heat plate cool down to room temperature. Implement self-tuning after changing the heat plate, thermo couple wire, or control panel.
Pressure Reducing Valve
Instructions
- Pull pressure adjusting knob and rotate to adjust press pressure.
- Push the drain valve at the bottom to release water from the air filter.
Instructions
Press Auto/Manual switch button to change operating modes.
- Auto Mode: Press foot pedal switch and the heat plate will move and press automatically.
- Manual Mode: Press foot pedal switch, and the heat pate will move to the other work station.
Press both “Press Buttons” at the same time to press.
Specifications
Plate Size (in)| Voltage| Power| Dimensions (in)| Actual Weight (lbs)|
Shipping Weight (lbs)
---|---|---|---|---|---
15.75 x19.69| 110V| 1.8kw| 42.5(L)x28.7(W)x23.2(H)|
260.15| **** 308.65