MEMPHIS AUDIO TLN65FE OEM Direct Fit Front Speaker Enclosures

MEMPHIS AUDIO DIRECT FIT OEM POWERSPORTS SPEAKERS

Memphis Audio direct fit OEM audio systems include everything you need to make your machine the loudest on the trails. These kits are designed to fit directly into your vehicle with zero custom fabrication required. Lightweight durable polypropylene speaker enclosures are tuned for maximum output and feature RGB LED lighting which illuminates the speaker cone, Memphis badge and provides down lighting making your machine stand out from the crowd. All the components used in this kit are marine grade IP66 rated and designed to withstand water and the elements allowing you to bring the party wherever the trails take you.

BEFORE YOU BEGIN

If you are uncertain about any aspect of this installation process check out the complete walk-through video in the link below:
WWW.MEMPHISCARAUDIO.COM/INSTALLATION-CENTER

Memphis Audio recommends all installations be completed by a certified authorized Memphis Audio dealer.

Warranty Information

This product has a 2-year warranty from the date of purchase for defects in material or workmanship. This warranty will be extended to 3 years when installed by a Memphis-authorized dealer using Memphis Connection products. The warranty is void if the product has been physically damaged by improper usage or abuse. If repairs are attempted outside of a Memphis Audio facility, the warranty is void. This warranty is limited to the original retail purchaser and does not cover any expenses incurred in the removal or re- installation of the product. This warranty does NOT apply to product exterior and cosmetics. Memphis Audio disclaims any liability for incidental or consequential damages caused by product defects. Memphis Audio’s liability will not exceed the purchase price of the product and the warranty period specified.

What is NOT covered under warranty

• Damage due to improper installation
• Damage caused by exposure to moisture, excessive heat, chemical cleaners and/or UV radiation
• Damage through negligence, misuse, accident or abuse. (Repeated returns for the same damage may be abuse)
• Product damaged in an accident and/or due to criminal activity
• Service performed by anyone other than Memphis Audio
• Subsequent damage to other components
• Any cost or expense related to the removal or re-installation of the product
• Products with tampered, missing, altered or defaced serial numbers/labels
• Freight damage
• The cost of shipping product to Memphis Audio
• Return shipping on non-defective items
• Any product not purchased from an authorized Memphis Audio dealer

Some states do not allow the exclusion or limitation of incidental or consequential damages. The above limitations or exclusions may not apply to you. This warranty gives you specific rights, you may have other rights which vary from state to state. If warranty service is required, a return authorization number is required to return the product to Memphis Audio. Warranty shipments to Memphis Audio are the responsibility of the purchaser. Pack the product carefully in the original carton if possible Memphis Audio will not be responsible for damages incurred in shipment or due to improper packaging materials used by the purchaser. If determined to be within warranty your product will be repaired or replaced at the discretion of Memphis Audio.

SPEAKER POD INSTALLATION

WARNING:
These instructions are designed to be used on 2019 and newer Honda Talon models. These pods are designed specifically to work with these types of machines. If you have a different year or model machine, check with your authorized Memphis Audio dealer or contact Memphis Audio customer service at 800-489-2300 prior to attempting installation. These kits are not designed to be used with any other model or year vehicle. Attempting to install these speakers on any other vehicle may result in permanent damage to your vehicle.

DRIVER SIDE SPEAKER INSTALLATION

• STEP 1
  Remove the 11 trim clips and 2 Hex head screws along the lower side cover on the driver and passenger side.

• STEP 2
  With the outside panel removed, position the corresponding template as shown in the photo above. Scribe the 2 bolt hole locations and the wire hole in the center.

• STEP 3
  Remove the trim clip here. The hole above the kick plate will be used to bolt the attached brackets to the vehicle on each side. Each side will use 1 M4 bolt, 1 M4 nut and 2 M4 washers.

• STEP 4
  Remove the template after the locations are marked on the panel.
  Drill the CENTER HOLE using a 3/4” bit. Drill the OUTSIDE HOLES using a 1/4” bit.

• STEP 5
  Run the wire through the 3/4” CENTER HOLE. Use the remaining 4 – 6M bolts and washers to bolt the enclosures from the back of the panel as shown.
  Once the installation is complete, turn it on and turn it up! Want more speakers? Check out our MXA60PS rear Powersports pods!

EXPAND YOUR SYSTEM WITH THESE ADDITIONAL PRODUCTS DESIGNED FOR YOUR MACHINE

MXAMCAPP APP CONTROLLED SOURCE UNIT

Need to control your audio system but don’t want to alter your dash? The MXAMCAPP App-controlled source unit gives you all the features and control of a traditional head unit directly from your phone or Bluetooth device. The black box hideaway unit is a fully functional Bluetooth streaming, AM/FM Radio with all the features of a traditional radio in a small IP66-rated marine grade package. To learn more visit www.memphiscaraudio.com or call us at 800-489-2300.

MXAMCAPP – Headless Unit

• 5 Source Options: AUX/BT/AM/FM/WB
• USB charging
• 50W x 4 built-in amplifier
• RGB LED control output
• Front/Rear/Subwoofer RCA output
• 5 Volt pre-amp output
• Conformal coated PCB IP66 Rated
• Wired remote fits standard rocker cutouts
• Wired remote buttons illuminate

REAR SPEAKERS

Add to your system with these rear Powersports pods. The kits include all the hardware needed to mount directly to your machine. These high-performance speakers are equipped with RGB LED lighting and are IP66 rated to withstand water and the elements. Contact your local Memphis Audio Dealer or contact us at 800.489.2300 to determine if you will need a bracket kit for your specific machine to mount these speakers.

CONTACT US

MEMPHISAUDIO

@MemphisCarAudioUSA
@MemphisCarAudio
800.489.2300
www.memphiscaraudio.com

References

• MEMPHIS AUDIO - Memphis Audio

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>