hollis morris Stem Pendant Lamp Instruction Manual
- June 12, 2024
- hollis morris
Table of Contents
hollis morris Stem Pendant Lamp
Product Information
The Stem Pendant is a stylish lighting fixture that combines solid wood, hand- blown glass, metal, and a G9 LED light bulb. It features a fabric-covered power cord and is finished with hard wax oil. The pendant is designed for 120V 50/60 Hz input (Canada + US)and has an output of 4.5W, 450 lumens, and 3000K with a CRI of 85 or higher. The suspension includes a single-point suspension per fixture, a single canopy connection, and a 10′ cord-length power cable. Custom lengths are available upon request. The fixture comes with a mounting plate and the standard mount finish is ceiling white, but custom finishes are available upon request.
Certification
The Stem Pendant is certified for safety and quality.
To install the pendant, follow these steps:
- Locate the desired canopy location on the ceiling.
- Connect the cloth-covered suspension cable from the fixture to the cable gripper on the canopy.
- Feed the insulated power line into the canopy as illustrated.
- Have a certified electrician connect the leads to the 120V domestic power.
- Secure all connections.
- Adjust all cables to the desired heights (the standard length maximum is 120 inches).
- Remember that the white wire is positive and the black wire is negative.
Product Usage Instructions
Hardware Replacement
To replace the hardware of the Stem Pendant, follow these steps:
- Unscrew the glass bulb from the wood top.
- Remove the G9 LED bulb from the socket by gently pulling.
- Insert a new G9 LED bulb.
- Screw the glass bulb onto the wood top.
PRODUCT CODE
STEM MATERIALS
- Solid wood
- Hand-blown glass
- Metal
- G9 LED light bulb
- Fabric-covered power cord
FINISH
- Hard wax oil
INPUT
- 120V 50/60 Hz (Canada + US)
OUTPUT
- 4.5W
- 450 lumens
- 3000K with CRI of 85 or higher
SUSPENSION
- Single-point suspension (per fixture)
- Single canopy connection
- 10’ cord length power cable
- Custom lengths upon request
- Mounting plate included with fixture
- Standard mount finish: ceiling white
- Custom finish available upon request
dimensions installation
CANOPY CONNECTION
- Locate desired canopy location on ceiling.
- Connect cloth-covered suspension cable from fixture to cable gripper on canopy.
- Feed insulated power line into canopy as illustrated on the right.
- Have a certified electrician connect +/- leads into 120 V domestic power.
- Secure all connections.
- Adjust all cables to desired heights (standard x length max. = 120”).
hardware replacement
- Unscrew the glass bulb from wood top
- Remove the G9 LED bulb from the socket by gently pulling
- Insert a new G9 LED bulb
- Screw glass bulb onto the wood top
CONTACT
- 501 Alliance Ave. Suite 213b Toronto,
- ON M6N 2J1
- phone: +1 647 970 9716
- email: [email protected].