Shenzhen Anruiwei Electronic Technology Co Ltd CX032 45x32x7mm Watch Wireless Charger Instruction Manual
- June 1, 2024
- Shenzhen Anruiwei Electronic Technology Co Ltd
Table of Contents
Shenzhen Anruiwei Electronic Technology Co Ltd CX032 45x32x7mm Watch
Wireless Charger
Product Information
Specifications
- Name: Watch Wireless Charger
- Dimensions: 45x32x7mm
- Material: Cellulose acetate
- Output: 1.5W, 2.5W(MAX)
- Input: 5V/1A
- Charging Port: USB-C
Product Usage Instructions
- Power Adapter: Use a PD20W or above power adapter (sold separately) for optimal performance.
- Protection Function: The charger has input overcurrent and overvoltage protection. If used improperly, it may shut down or reduce output power. Check for abnormal device usage.
- Ambient Temperature: Keep the ambient temperature between 0-25°C. Avoid exposing the product to water, fire, or temperatures above 40°C.
FAQ
-
Q: What happens if I use a power adapter below 20W?
A: Using a power adapter below 20W may result in slower charging speeds or reduced performance of the wireless charger. -
Q: Can I leave the charger plugged in overnight?
A: It is recommended not to leave the charger plugged in overnight to prevent overcharging or potential safety hazards. -
Q: Is the charger waterproof?
A: No, the charger is not watrproof. Do not expose it to water to avoid damage and safety risks.
CX032
Product parameters
- Name Watch wireless charger
- Product dimensions 45x32x7mm
- Material Cellulose acetate
- Output 1.5W 、2.5W(MAX)
- Input 5V/1A
- Charging port USB-C
Tips
- Recmmended:PD20W or above power adapter(sold separately)
- This product has an input overcurrent and overvoltage protection function,lf it is usedimproperly it willshut down or reduce the output power,please check whether the device is abnormal or used improperly
- Keep the ambient temperature at 0-25℃, Do not put the product in water,fire,high temperature(>40℃<) or low temperature(>20<)environment,keep it away from children.
- Please use a dry soft cloth to clean the surface, do not use chemicals, soap or detergent to clean.
- Improper use or improper placement may reduce the life of the product or damage it, which is not covered by the warranty.
Product analysis
Application scenarios
When charging, the center of the watch should be aligned with the center of
the charging position, then it can be charged wirelessly. If the watch can not
be charged normally, adjust the position of the watch until the watch can be
charged 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
The distance between user and products should be no less 20cm