britax BROOK and GROVE Stroller CozyFit Insert Instructions

June 13, 2024
Britax

britax BROOK and GROVE Stroller CozyFit Insert

Product Information

The BROOKTM, BROOKTM +, & GROVE Stroller CozyFitTM Insert is a specially designed insert for use with GroveTM, BrookTM, and BrookTM + Strollers.
It provides additional comfort and support for infants weighing 10 lbs (4.5 kg) or more until they have sufficient head and neck control. The CozyFitTM Insert includes a liner, shoulder strap slots, waist strap slots, buckle slot, head pad, and wedge insert.

CozyFitTM Insert Overview

  1. Liner
  2. Shoulder Straps Slots (2)
  3. Waist Straps Slots (2)
  4. Buckle Slot
  5. Head Pad
  6. Wedge insert

Product Usage Instructions

  1. Press both brake pedals down to lock the parking brake.
  2. Recline the seat by lifting and holding the recline handle on the back of the seat, and recline it into the lowest position.
  3. Release the harness by pressing the button in the center of the buckle while pulling the two tongues away from the buckle assembly.
  4. Pinch the waist strap tongues while separating them from the shoulder strap and place them aside.
  5. Place the wedge with the curved side facing upward.
    • Note: The wedge should only be used for infants weighing 10 lbs (4.5 kg) or more until they have sufficient head and neck control.
  6. Attach the head pad hook and loop behind the liner.
    • Note: The head pad should be used for infants weighing 10 lbs (4.5 kg) or more until they have sufficient head and neck control.
  7. Place the liner on the toddler seat, aligning its openings with the respective straps.
  8. Route the waist straps, shoulder straps, and the buckle through the liner slots.
  9. Align the waist strap tongues with the shoulder strap retainers and slide through until they click locking into place.
  10. Slide the head pad up or down for proper adjustment.

Removing the CozyFitTM Insert

  1. Press both brake pedals down to lock the parking brake.
  2. Release the harness by pressing the button in the center of the buckle while pulling the two tongues away from the buckle assembly.
  3. Pinch the waist strap tongues while separating them from the shoulder strap.
  4. Pull out the waist straps and buckle from the seat insert slots.
  5. Remove the seat insert from the stroller.
  6. Reconnect the shoulder strap retainers with the waist strap tongues.

Care and Maintenance Please refer to the care and maintenance instructions in the user manual for detailed information on cleaning and maintaining the CozyFitTM Insert.

Warranty Please refer to the warranty information in the user manual for details about the product’s warranty coverage.

  • Britax recommends you consult with your pediatrician regarding whether your child has sufficient head and neck control.

WARNING

  • Failure to follow all warnings and instructions could result in SERIOUS INJURY or DEATH.
  • Never leave child unattended.
  • Until the child is ready to transition into the CozyFitTM insert the infant car seat must be used as instructed with the stroller.
  • The CozyFitTM insert is ONLY intended for use with the toddler seat. Do NOT use outside of the toddler seat.
  • The liner, wedge and the head pad is for infants weighing 10 lbs (4.5 kg) or more ONLY and MUST be used until the infant has sufficient head and neck control.
  • The wedge and the head pad MUST ONLY be used with the stroller harness straps to secure the child in the most reclined position of the toddler seat.
  • The liner and the head pad may continue to be used with children after they have sufficient head and neck control.
  • Do not allow the infant to lie face down on the insert or any padded material.
  • Do not allow infant to sleep in stroller. The CozyFitTM insert is not intended for sleep.
  • Do not allow this item or any other product to interfere with proper fit and function of stroller restraint system according to manufacturer’s instructions. See your stroller manufacturer’s user guide for more information.
  • Discontinue use of this accessory immediately if it interferes with proper fit or function of your stroller.
  • Use for intended purposes only.
  • Care should be exercised near open flame or with burning cigarettes.
  • There is no warranty either expressed or implied that use of this product will eliminate the possibility of any injury that may otherwise occur.
  • This is not a toy. Do not allow children to play with this product. When not in use, keep out of reach of children.

Compatibility:

  • This CozyFitTM Insert is designed for use with GroveTM, BrookTM, and BrookTM + Strollers.

CozyFitTM Insert Overview

  1.  Liner
  2. Shoulder Straps Slots (2)
  3. Waist Straps Slots (2)
  4. Buckle Slot
  5. Head Pad
  6. Wedge insert

Installing the CozyFitTM Insert

  1. Press both brake pedals down to lock the parking brake (Fig. 1)
  2. Recline the seat.
    • a. Lift and hold the recline handle on the back of the seat, and recline into the lowest position (Fig. 2).
  3. Release the harness by pressing the button in the center of the buckle while pulling the two tongues away from the buckle assembly (Fig. 3).
  4. Pinch the waist strap tongues while you separate them from the shoulder strap. Place them to the side (Fig. 4).
  5. Place the wedge with the curved side facing upward (Fig. 5).
    • Note: The wedge is for infants weighing 10 lbs (4.5 kg) or more ONLY and MUST be used until the infant has sufficient head and neck control.
  6. Attach the head pad hook and loop behind the liner (Fig. 6).
    • Note: The head pad MUST be used for infants weighing 10 lbs (4.5 kg) or more until the infant has sufficient head and neck control.
  7. Place the liner on the toddler seat aligning its openings with the respective straps (Fig. 7).
  8. Route the waist straps, shoulder straps, and the buckle through the liner slots (Fig. 8).
  9. Align the waist strap tongues with the shoulder strap retainers and slide through until they click locking into place (Fig. 9).
  10. Slide the head pad up or down for a proper adjustment (Fig. 10).

Removing the CozyFitTM Insert

  1. Press both brake pedals down to lock the parking brake (Fig. 11).
  2. Release the harness by pressing the button in the center of the buckle while pulling the two tongues away from the buckle assembly (Fig. 12).
  3. Pinch the waist strap tongues while you separate them from the shoulder strap(Fig. 13).
  4. Pull out the waist straps and buckle from the seat insert slots (Fig. 14).
  5. Remove seat insert from stroller.
  6. Reconnect the shoulder strap retainers with the waist strap tongues.

Care and Maintenance

  • Refer to product care label for wash instructions.
  • If care label indicates machine washable, always refer to us.britax. com/faqs for important care information.

Warranty

  • This CozyFitTM insert was manufactured by Britax Child Safety, Inc. (“Britax”). To the extent allowed by law, Britax warrants this product to the original retail purchaser as follows:

LIMITED ONE-YEAR WARRANTY

  • This product is warranted against defective materials or workmanship for one (1) years from the date of original purchase. Proof of purchase is required for any warranty claims. Your exclusive remedy for this warranty is that Britax will, at its option, provide repair or replacement components to the original purchaser of this product. Britax reserves the right to discontinue or change fabrics, parts, models or products, or to make substitutions.
  • This warranty does not cover damages that arise from negligence, misuse or use not in accordance with the product instruction. Additionally, Britax products purchased from unauthorized retailers, online auction sites, or as second hand items are not covered under this warranty.
  • The use of non-Britax covers, inserts, toys, accessories, or tightening devices is not approved by Britax. Their use could cause this child restraint to fail safety standards. Their use also may void the Britax warranty.
  • To make a claim under this warranty, you must contact Britax Consumer Services at 1-888-427-4829 or 1-704-409-1699, or write to us using the address on the back cover of this User Guide.

DISCLAIMER OF WARRANTIES

  • The following disclaimer shall apply to you to the maximum extent permitted by applicable law. THE LIMITED WARRANTY SET FORTH ABOVE IS THE EXCLUSIVE WARRANTY MADE BY BRITAX. ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY,

INCLUDING WITHOUT

  • LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. Some states do not allow certain exclusions or limitations on warranties, so the above may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state. Neither Britax, nor the retailer selling this product, authorizes any person to create for it any other warranty, obligation, or liability in connection with this product.
  • LIMITATION OF DAMAGES
  • The following limitation of damages shall apply to you to the maximum extent permitted by applicable law.
  • THE REMEDIES CONTAINED IN THE LIMITED WARRANTY SET FORTH ABOVE ARE THE EXCLUSIVE REMEDIES PROVIDED BY BRITAX. IN NO EVENT SHALL BRITAX  BE LIABLE TO YOU FOR ANY INCIDENTAL, SPECIAL, PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE RELATIONSHIP BETWEEN YOU AND BRITAX (INCLUDING DISPUTES RELATED TO THE MARKETING OR SALE OF BRITAX PRODUCTS), ANY PROVISIONS IN THIS USER GUIDE, AND/OR YOUR PURCHASE OR USE OF ANY PRODUCTS DESIGNED, MANUFACTURED, DISTRIBUTED, MARKETED, OR SOLD BY BRITAX.
  • PLEASE COMPLETE AND MAIL THE OWNER REGISTRATION CARD WITHIN (30) DAYS OF PURCHASE.
  • You may also register online at us.britax.com/registration.

Arbitration Agreement

  • MANDATORY ARBITRATION & CLASS ACTION WAIVER (“ARBITRATION AGREEMENT”) PLEASE READ THIS SECTION CAREFULLY BECAUSE IT AFFECTS YOUR LEGAL RIGHTS, REQUIRES YOU TO ARBITRATE DISPUTES, AND LIMITS THE MANNER IN WHICH YOU CAN SEEK RELIEF.
  • Arbitration is a process in which persons with a dispute waive their rights to file a lawsuit and proceed in court and to have a jury trial to resolve their disputes and, instead, agree to submit their disputes to a neutral third person (an “arbitrator”) for a decision. Each party to the dispute has an opportunity to present some evidence to the arbitrator. Pre-arbitration discovery may be limited. Arbitration proceedings are private and less formal than court trials. The arbitrator will issue a final and binding decision resolving the dispute, which may be enforced as a court judgment. A court rarely overturns an arbitrator’s decision.
  • YOU AND BRITAX AGREE THAT ANY DISPUTE BETWEEN US, WHETHER BASED IN CONTRACT, TORT, STATUTE OR OTHERWISE, SHALL BE RESOLVED IN BINDING INDIVIDUAL ARBITRATION. For purposes of this Arbitration Agreement, the word “dispute” and “disputes” are given the broadest possible meaning and include, without limitation, all claims, disputes, and/or controversies arising out of or relating in any way to the relationship between you and Britax (including disputes related to the marketing or sale of Britax products), any provisions in this User Guide or this Arbitration Agreement (including the interpretation and scope of this Arbitration Agreement and the arbitrability of any dispute), and/or your purchase or use of any products designed, manufactured, distributed, marketed, or sold by Britax. The Federal Arbitration Act (“FAA”) and federal arbitration law apply to this Arbitration Agreement. Notwithstanding the foregoing, you and Britax each agree that you and Britax shall retain the rights to bring an individual suit in small claims court for disputes within the scope of such court’s jurisdiction and/or to bring an individual suit in court to enjoin infringement or other misuse of intellectual property rights. In no way shall the foregoing sentence allow for an action to be brought on a class or collective basis.
  • YOU HAVE THE RIGHT TO OPT OUT OF THIS ARBITRATION AGREEMENT, BUT YOU MUST EXERCISE THIS RIGHT WITHIN THIRTY (30) DAYS OF YOUR PURCHASE OF A BRITAX PRODUCT. If you do not wish to be bound by this Arbitration Agreement, you must notify Britax by mailing or e-mailing a written opt-out notice, postmarked or electronically delivered within thirty (30) days of your purchase of a Britax product, to: ATTN: Legal Department, 4140 Pleasant Road, Fort Mill, South Carolina 29708. Your opt-out notice must include your full name, address and/ or e-mail address, the model and serial numbers of the purchased product, a copy of your proof of purchase, and a statement that you intend to opt out of this Arbitration Agreement. If you do not opt out within thirty (30) days of your purchase, then this Arbitration Agreement will apply and you understand and agree that you are waiving your right to maintain other available resolution processes, such as a court action or administrative proceeding, to resolve your dispute with Britax.
  • The arbitration will be conducted confidentially by a single arbitrator and administered by the American Arbitration Association (“AAA”) under its Consumer Arbitration Rules most recently in effect to the extent such rules and procedures do not contradict the express terms of this Arbitration Agreement. To learn more about the rules and how to begin an arbitration, you may call any AAA office or go to www.adr.org. If you demand arbitration, then at your request Britax will advance your portion of the expenses associated with the arbitration, including the filing, administrative, hearing and arbitrator’s fees (“Arbitration Fees”) to the extent such Arbitration Fees exceed $200. If Britax demands arbitration, then at your request Britax will advance your portion of the Arbitration Fees. For claims of $10,000 or less, you can choose whether you would like the arbitration carried out based only on documents submitted to the arbitrator or by a hearing in person or by telephone. The arbitration hearing will be conducted in the county of your residence, within 30 miles of such county, or in such place as shall be ordered by the arbitrator. Throughout the arbitration, each party shall bear his, her or its own attorneys’ fees and expenses, including any witness and expert witness fees. The arbitrator shall apply applicable substantive law consistent with the FAA, shall apply statutes of limitation, and shall honor claims of privilege recognized at law. The arbitrator shall decide, with or without a hearing, any motion that is substantially similar to a motion to dismiss for failure to state a claim or a motion for summary judgment. In conducting the arbitration proceeding, the arbitrator shall not apply any federal or state rules of civil procedure or evidence. The arbitrator shall not consolidate the claims of multiple parties unless you and Britax agree to do so. At the timely request of any party, the arbitrator shall provide a written explanation for the award. The arbitrator’s award may be filed with any court having jurisdiction.
  • THIS ARBITRATION AGREEMENT DOES NOT ALLOW CLASS OR COLLECTIVE ARBITRATIONS EVEN IF THE AAA RULES OR PROCEDURES WOULD. IN OTHER WORDS, YOU AND BRITAX EACH AGREE THAT ALL DISPUTES SHALL BE ARBITRATED ON AN INDIVIDUAL BASIS AND WAIVE ANY RIGHT TO PROCEED IN A CLASS, CONSOLIDATED, OR REPRESENTATIVE FASHION. THE ARBITRATOR MAY AWARD MONEY OR INJUNCTIVE RELIEF ONLY IN FAVOR OF THE INDIVIDUAL PARTY SEEKING RELIEF AND ONLY TO THE EXTENT NECESSARY TO PROVIDE RELIEF WARRANTED BY THAT PARTY’S INDIVIDUAL CLAIM. NO CLASS, REPRESENTATIVE OR PRIVATE ATTORNEY GENERAL OR GENERAL INJUNCTIVE RELIEF THEORIES OF LIABILITY OR PRAYERS FOR RELIEF MAY BE MAINTAINED IN ANY ARBITRATION CONDUCTED PURSUANT TO THIS ARBITRATION AGREEMENT.
  • If the foregoing class action waiver and prohibition against class arbitration is determined to be invalid or unenforceable for any reason, then this entire Arbitration Agreement shall be void. If any portion of this Arbitration Agreement other than the class action waiver and prohibition against class arbitration is deemed to be invalid or unenforceable for any reason, it shall not invalidate the remaining portions of this Arbitration Agreement. If for any reason a dispute proceeds in court rather than in arbitration, you and Britax each waive any right to a jury trial.
  • GroveTM,BrookTM, BrookTM +, CozyFitTM,and Britax® are trademarks owned by Britax Child Safety, Inc. All rights reserved. ©2023 Britax Child Safety, Inc.
  • This product and its components are subject to change without notice. Printed in China. Britax Child Safety, Inc., 4140 Pleasant Road, Fort Mill, SC 29708, U.S.A. Consumer Services: 888.427.4829 or 704.409.1699 www.Britax.com

Documents / Resources

| britax BROOK and GROVE Stroller CozyFit Insert [pdf] Instructions
BROOK, BROOK, GROVE, BROOK and GROVE Stroller CozyFit Insert, GROVE Stroller CozyFit Insert, Stroller CozyFit Insert, CozyFit Insert, Insert
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals