QNAP TVS-h874T-i9-64G Diskless NAS Intel 16 Core CPU 64GB RAM Installation Guide
- June 15, 2024
- QNAP
Table of Contents
QNAP TVS-h874T-i9-64G Diskless NAS Intel 16 Core CPU 64GB RAM
Product Information
The product is a storage device manufactured by QNAP Systems, Inc. It is designed to support 3.5-inch HDDs, 2.5-inch HDDs/SSDs, and M.2 NVMe SSDs. The device is compatible with both Windows and Mac operating systems. It complies with Part 15 of the FCC Rules and CE compliance Class B. It also meets the UKCA requirements for products sold in Great Britain. The product is subject to the WEEE directive and QNAP GmbH and QNAP Ltd are the designated offices in the EU and UK respectively.
Specifications
- Supported Drives: 3.5-inch HDD, 2.5-inch HDD/SSD, M.2 NVMe SSD
- Operating Systems: Windows, Mac
- Compliance: Part 15 FCC Rules, CE Class B, UKCA requirements
Product Usage Instructions
Installation
To install the product, follow these steps:
- Connect the power cable to the device and plug it into a power outlet.
- Connect the device to your computer using the provided USB cable.
- Power on the device by pressing the power button.
Cloud Installation
To set up the product using cloud installation, follow these steps:
- Visit https://install.qnap.com/ using a web browser.
- Scan the QR code or click on “Cloud Installation” to initiate the process.
- Follow the on-screen instructions to complete the cloud installation.
Support and Troubleshooting
If you encounter any issues with the product, you can try the following:
- Visit the QNAP Service Portal by scanning the QR code or going to https://service.qnap.com/install.
- Create a support ticket for assistance.
- Download the necessary software or firmware updates from the QNAP Download Center at www.qnap.com/download.
WHAT IN THE BOX
INSTALLATION
http://www.qnap.com/qfinderpro
Cloud Installation: https://install.qnap.com/
Visit the Download Center for our full guides and utilities:
Download Center: www.qnap.com/download
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operatioa
FCC Class a Notice:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation [f this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/television technician for help.
Modifications
Any modifications made to this device that are not approved by ONAP Systems,
Inc. may void the authority granted to the user by the FCC to operate this
equipment.
This device complies with CE compliance Class B.
According to the requirement of the WEEE legislation, the following user
information is provided to customers tor all branded ONAP products subject to
the WEEE directive.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where vou purchased the product.
Office in EU;
- ONAP GmbH,
- Karl-Arnold-Straße 26,
- 47877 WilliCh, Germany
Office in the UK;
- ONAP Ltd,
- 2 Drakes Meadow, Swindon SN3 3LL
- United Kingdom
This device complies with the IJKCA requirements for products sold in Great
Britain.
www.qnap.com/regulatory/
THIS PRODUCT CONTAINS A BUTTON BATTERY
- If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours.
- Keep batteries out of reach of children.
- If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
SCANNER
install.qnap.com
service.qnap.com
download.qnap.com
FAQ
FAQ (Frequently Asked Questions)
-
Q: What types of drives are compatible with the product?
A: The product supports 3.5-inch HDDs, 2.5-inch HDDs/SSDs, and M.2 NVMe SSDs. -
Q: Which operating systems are supported?
A: The product is compatible with Windows and Mac operating systems. -
Q: Where can I find software or firmware updates?
A: You can download the necessary updates from the QNAP Download Center at www.qnap.com/download.
References
- download.qnap.com
- Cloud Install
- Customer Service - QNAP
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Compatibility List - QNAP
- Download Center | QNAP (US)
- Cloud Install
- Support - Service Portal - QNAP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>