Wings UpBeat 101 Speakers User Manual
- June 15, 2024
- WINGS
Table of Contents
Wings UpBeat 101 Speakers User Manual
INTRODUCTION
Welcome to the Wings Portable Device Generation with the all new Wings UpBeat 101, We hope you are as excited as us to feel and flaunt your latest Sound gear. But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains important technical information to ensure you have a seamless audio experience with us. Once you are done reading the manual. We are sure you will be all set to.
FEEL IT!
FLAUNT
WHAT’S IN THE BOX
UPBEAT LAYOUT
- Power Button :- Long Press: Switch ON/ OFF the speaker. Double Press: TWS Connection
- “<” Button: – Short Press: Volume Down Long Press: Previous Track
- Play/Pause button: – Short Press: Pause/ Play/hands-free Calling
- “>” Button: – Short Press: Volume Up. Long Press: Next Track
- USB Drive slot
- Micro SD Card Slot
- Charging port
- Status Light
- Shoulder strap hooks
- RGB LED Light
HOW TO PAIR
Step 1: Switch ON the device by Long pressing the Power ON /OFF Button for 2 sec.
Step 2: You will hear a prompt. The status light will flash in blue, indicating that the device is powered ON and in pairing mode.
Step 3: Switch ON Bluetooth on your pairing device and search for “UpBeat 101′ in the Bluetooth menu.
Step 4: Select ”UpBeat 101″ from the list of found devices.
Step 5: After successful pairing, you will hear a prompt indicating that the device is paired, and the Poring status Blue LED Will turn to always ON.
Note: When the Speaker is not connected to any device in Bluetooth Mode, then the Speaker will turn off automatically after 10min.
SD CARD / USB MODE
Stream music from an SD card or USB flash drive
. Tum ON the device. • Insert the SD card or USB flash drive preloaded with
songs, into the SD card slot or USB flash drive slot of the device
correspondingly, you will hear a voice prompt for “USB mode” or ‘IF card mode”
, respectively. • Device would automatically start playing songs from the
micro SD Card or USB flash. TWS MODE 0•
TWS mode enables Two Upbeat 101 to connect in stereo • Turn ON the “UpBeat
101” that needs to be connected in TWS mode. • Double Press the “Power” button
on either device in Bluetooth mode, and you will hear a ringtone prompt. This
confirms that the devices am connected successfully in MS mode. • Search for
‘UpBeat 101″ on your mobile phone and pair it with this device. • If you don’t
need TWS mode. Please Double press the “Power’ button on either device. You
will hear a ringtone. The devices are now disconnected in TWS mode.
CHARGING THE DEVICE 14
When the device needs to be charged, plug the Micro USB end of the charging
cable Into the charging port.
Plug the other end into a USB port or your computer or compatible power
adapter (5V/1A; otherwise, it may cause damage to the device).
The Status Light will be ON constantly, indicating that the device is being
charged. Once the device is fully charged, the status light will tum OFF.
BUTTON FUNCTION 4§,t,
Playing Music
Music Mode Function Operation Buttons Playing Music Increase Volume Short
Press > key Playing Music Decrease Volume Short Press < key Playing Music
Pause Short Press [I key Playing Music Play Short Press [I key Playing Music
Previous Track Long Press < key Playing Music Next Track long Press > key
CALLING FUNCTION
Hands Free Mode Function Operation Buttons Incoming Call Answer IncomingCall
Short Press I ] key Incoming Call Reed IncomingCall Double Press I ] key
Incoming Call End the Call Short Press I ] key Standby mode and Radial last
number Short Press [ ] key 2 connected to a device times
TECHNICAL SPECIFICATIONS Pal
PARAMETERS VALUES Bluetooth Version: 5.1 Wireless distance: Uptol °meters
Output power: 5Watt Unit size: 11cm(L)*8cm(W)13cm(B) Power input: DC 5V/1A
Charging time: About 1.5 hours Play time: Upto 20 hours Micro SD(TF)card/USB
flash drive: Supports up to 32GB Multiple functions: Wireless play/ USB flash
drive/ Hands Free calling/ Micro TF card/RGB lights
TROUBLESHOOTING £b„
Some terminal music players are without an automatic switching play function.
In this case, a ‘pop’ noise may be heard between ongs. If you cannot connect
to your mobile device. Try removing the speaker from your mobile device’s
saved devices and re-connect as instructed above.
The sound performance may also be affected when there is a weak connection
between the mobile device and the speaker. To improve connection, bring the
mobile device closer to the speaker or remove any obstacles between the two
devices.
The sound performance may also be affected if the speaker’s battery power
level is low. Please make sure the speaker is fully charged to improve this
issue.
Note: • Charge the speaker fully before first use. . The charging time depends
on the baiten/s existing charged levels and the USB adaptor’s specifications.
• The LED indicator rums off automatically (during charging) when the battery
is fully charged. • The speaker’s usage time depends on the charge in the
battery, mode, volume level, etc.
10
SAFETY AND MAINTENANCE 0
Please read the below suggestions to help prolong the product lifespon and
clearly understand the warranty clauses:
• Keep the product dry, do not put it in humid medicos, to avoid a short
drcuif.
• Do not expose it to the peak sun or high heat for extended period as this
will shorten the Rieman of electronic componenth damage battery and deform
some plastic parts.
• Do not put it In cold circumstances to avoid damage to PCB board
• Do not attempt to dementia the product, as it may be unsafe especially for
nothproFeroonals.
• Do not use Chemical products or detergent. Oily liquids to clean the item.
• Do not scratch the surface with sharp items to avoid damaging the case and
appearance.
Note: Any damage to the product that is not a manufacturing defect will render the warranty null and void. Therefore, please take Oncost some of your product.
DOWNLOAD
Wings UpBeat 101 Speakers User Manual -[Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>