HORSE DENTAL EQUIPMENT DENTALSCOPE Starter Kit Instruction Manual
- June 5, 2024
- HORSE DENTAL EQUIPMENT
Table of Contents
HORSE DENTAL EQUIPMENT DENTALSCOPE Starter Kit Safety Instructions
WARNING. Read safety warnings and instructions. Failure to follow safety warnings and instructions of use may result to electric shock, fire, and/or serious injury for the user. HDE company declines all responsibility in the event of damage resulting from improper use or non-compliance with these safety instructions.
Technical Features
General features
Box Overall Dimensions Length of dentalscope Dimension of head Main tube + head
Handle Weight
|
850 x 135 x 80 mm
692 mm
Width 17mm x Thickness 17,2 mm, round shape on top Stainless steel, Ø12 mm, length 482 mm
Plastic POM, Ø12 mm, Length 210 mm 0,360 kg
---|---
Camera
Camera type Video Resolution Video System
Optics Angle of view
|
CMOS
704 x 576 pixel PAL
4 glass lenses
70°
LED lighting
LED color temperature
|
5.000° K
Video transmission
Wireless Technology
Wire technology
|
Radio Frequency signal 5,86 GHz, transmitter integrated inside the handle (need a RF receiver)
AV connection, cable supplied, length 1,5 mm
Battery and Charger
Battery Battery Protection
Charger In Charger Out
Time required to charge the battery
|
Lithium-Ion Polymer, Rechargeable single cell 3,7 Volts 600 mAh
100-230 V AC 50/60 Hz 0,4 A
5 V DC 2,0 A
3 hours
Autonomy| 1 hours with full battery charge
Those characteristics are given for information purposes only. They are in no way contractual and may be modified for improvement purpose without prior notice.
Product Description – Basic set
- Dentalscope equipment
- Charger
- Video Cable, length 1,5 meter
- Storage and transportation case – rigid plastic with protective foam
Easy to use : Plug and play system Sequence for
- Connect cable with a dedicated plug on the bottom of the Dentalscope
- Connect the other extremity of the cable (AV plug) on a screen equipped with an AV-Video plug
- Press the green button on the scope,
- And watch in live streaming.
Available options for monitoring
Option 1: Monitoring on Smartphones, Tablets, and Computer
Plug an RF converter on a USB socket, install DVR /OTG Software on the device
(Smartphone, Tablet, Computer), and watch in live streaming.
Using the software, you can take pictures and record videos.
Only available on PC Win 7, Win 10, or Android Tablet. Not available on MAC or
iOS Tablet. Option 2 : Monitoring an external monitor
10” DVR Viewing Monitor with recording on SD-CARD (video + picture)
5. 5- 10” Monitor
6. Charger for the monitor
7. Storage and transportation case – a rigid plastic with protective foam
Delivery conditions – First Use
Battery
The battery is delivered with almost 30% of charge. Fully charge the battery
before first use.
Insert the charger cable into the backside of the scope, and plug the charger
into the electrical socket.
Set up for Computer
First, you need to install software, for monitoring.
Several free software is available on the internet.
HDE recommends AMCAP or OTG View. HDE supplies AMCAP for free.
Connect the USB converter directly to the USB socket of the computer.
An auto-install processus starts, it creates an interface “AV TO USB2.0”
Starts AMCap software, select “Devices” → “AV TO USB2.0”
There is no setup to do with the dental scope, the converter is already connected to the right frequency with the scope.
Set up for Androïd Tablet or Smartphone
First, you need to install software, for monitoring.
Go to PlayStore, or GooglePlay, and install OTG View – free software
recommended.
Connect the USB converter to your support device (Computer, Tablet, or
Smartphone). Choose the adaptor that fits to your USB connexion (USB-C or
Micro-USB)
There is no more setup to do, the USB converter it directly paired by
radiofrequency to the dental scope.
Set up for Monitor
Please refers to the Appendix “Monitor Setup sheet” to pair the monitor with the dental scope.
Standard Use
-
With the AV-cable
- Connect AV-cable from both sides:
- Small-pin connected to the bottom of the dental scope,
- Large pin connected to the screen.
- Press the green button on the scope,
And you can work!
-
With the USB converter
- Connect the USB converter to your support device (Computer, Tablet or Smartphone),
- Start visualization software,
- Press the green button on the scope
And you can work!
-
With the Monitor
- Turn on the monitor, and choose the right mode (DVR or RF),
- Press the green button on the scope,
And you can work!
Annex: Monitor
Monitor Set up
The monitor is equipped with several modes. Only 2 modes are useful for the
dental scope :
- RF Mode: dedicated to direct visualization
- DVR Mode : dedicated for visualization + screenshot + video capture.
To choose the mode :
- Press “SOURCE/EXIT” to scroll to the dedicated mode,
- Press “CH/+” to validate,
Set up of the frequency – to pair with the dental scope :
- Turn on the dental scope by pressing the green button on the handling,
- Set up of the Band:
- Press 1 time on “+/CH”
- Press on “-/BAND” and scroll until Band A
- Set up of the Channel:
- Press on “+/CH” and scroll until Chanel 1: 5865 MHz
- Remark: by long press on “+/CH” the device automatically launches a scanning procedure to detect the channel of the dental scope.
Monitor Recordings – Taking pictures and/or videos
- Introduce microSD inside the socket
- Choose DVR mode,
- Turn on the dental scope → image appears.
- To take a picture: press on “SC SHOT” → and it is done!
- To take a video :
- Press 1 time on “REC/OK” to start recording,
- Press a second-time en “REC/OK” to stop recording.
To view what has been recorded :
- Press “MODE”
- With keys “UP” and “DOWN” scroll pictures and videos recorded on MicroSD-card
- Press “REC/OK” to start playing the video.
- Caution: with “MENU” you can delete the recordings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>