QNAP QSW-3216R-8S8T Desktop 10G Switch Installation Guide
- June 15, 2024
- QNAP
Table of Contents
QNAP QSW-3216R-8S8T Desktop 10G Switch
Product Information
Specifications
- Model: QSW-3216R-8S8T
- Front Panel Ports: 10GbE RJ45 ports, 10GbE SFP+ ports
Hardware Overview
The QSW-3216R-8S8T is a network switch with 16 10GbE RJ45 ports and 8 10GbE
SFP+ ports. It is designed for high-speed data transmission and is suitable
for use in enterprise networks.
LED Behavior
| LED | Description |
|---|---|
| System Status | The device is powered off. |
| Loop detection LED | A network loop occurred. |
| 10GbE RJ45 | Data is being transmitted. The link speed is operating at 10 |
Gbps.
10GbE SFP+ (Left)| Data is being transmitted. The link speed is operating at 5
Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps.
10GbE SFP+ (Right)| Data is being transmitted. There is no network connection.
Product Usage Instructions
Hardware Installation
- Attach the foot pads to the bottom of the switch.
- If needed, use the rack mount kits to mount the switch in a rack.
- Secure the switch in place using the bracket screws.
- Connect the power cord to the power input on the switch.
LED Status
The LED indicators on the front panel provide information about the status
of the switch. Refer to the LED behavior table for detailed descriptions of
each LED status.
Port Configuration
- 10GbE RJ45 ports: These ports support data transmission at 10 Gbps.
- 10GbE SFP+ ports: These ports support data transmission at 5 Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps, depending on the connected device.
FAQ
-
Q: What should I do if the device is not powering on?
A: Check if the power cord is securely connected to the switch and the power outlet. If the issue persists, contact customer support for further assistance. -
Q: How can I detect and resolve network loops?
A: The loop detection LED will indicate if a network loop has occurred. To resolve the issue, disconnect any looped connections and ensure proper network cabling.
WHAT’S INCLUDE
Hardware Installation
Hardware Overview
Front Panel Ports
- 10GbE RJ45 ports
- 10GbE SFP+ ports
LED Behavior
Description
| LED | Status | Description |
|---|---|---|
| 1. System Status | Green | The device is ready. |
| Flashes green | • The device is being initialized. |
• The firmware is being updated.
Note: When updating the firmware, do not remove the power cord or USB cable, and do not force-exit the application.
• The device is being reset.
Red| A fatal device error occurred.
Off| The device is powered off.
2. Loop detection LED| Red (Port LEDs encountering loops are off)| A network
loop occurred.
Off| No loops detected.
3. 10GbE RJ45| Green| The link speed is operating at 10 Gbps.
Flashes green| Data is being transmitted.
Amber| The link speed is operating at 5 Gbps, 2.5 Gbps, 1Gbps, or 100Mbps.
Flashes amber| Data is being transmitted.
Off| There is no network connection.
4. 10GbE SFP+ (Left)| Green| The link speed is operating at 10 Gbps.
Flashes green| Data is being transmitted.
Off| There is no network connection.
5. 10GbE SFP+ (Right)| Amber| The link speed is operating at 1 Gbps.
Flashes amber| Data is being transmitted.
Off| There is no network connection.
Specifications
- Model QSW-3216R-8S8T
- Dimensions (H x W x D) 43.3 x 207 x 197 mm
- Net weight 1.52kg
- Input voltage range 100 ‒ 240 VAC
- Switching bandwidth 320 Gbps
- 10GbE SFP+ ports 8
- 10GbE RJ45 ports 8
- Operating temperature 0˚C to 40°C (32°F to 104°F)
- Relative humidity 5% to 95% (non-condensing)
Download Center www.qnap.com/download
Visit Download Center for our full guides and utilities.
FCC
Conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
Modifications: Any modifications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment.
This device complies with CE compliance Class A.
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP Electronics products subject to the WEEE directive. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product
Office in EU;
QNAP GmbH,
Karl-Arnold-Straße 26,
47877 Willich, Germany
Office in UK;
QNAP Ltd,
2 Drakes Meadow, Swindon SN3 3LL
United Kingdom
This device complies with the UKCA requirements for products sold in Great Britain.
THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed, a lithium button battery can cause severe or fatal injuries
within 2 hours. Keep batteries out of reach of children. If you think
batteries may have been swallowed or placed inside any part of the body, seek
immediate medical attention. Operation of this equipment in a residential
environment could cause radio interference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>