Kogan KAWPWTRFNTA 1.9L Pet Water Fountain Instruction Manual

kogan.com
USER GUIDE
KOGAN SMARTERHOME™
1.9L PET WATER FOUNTAIN
KAWPWTRFNTA

SAFETY & WARNINGS

To protect against electric shock, avoid immersing the power cord in water or any other liquid.

• Close supervision is necessary when children are using or are near the appliance.
• Unplug the appliance from the outlet when it is not in use and before cleaning.
• Do not operate the appliance if the cord is damaged. If the appliance malfunctions or has been damaged in any way, cease use immediately and contact help.Kogan.com for support.
• Do not use any accessory or attachments that have not being supplied with this product.
• Do not use this appliance outdoors.
• Avoid letting the power cord hang over the edge of a table or counter or come into contact with hot surfaces.
• Do not place the appliance on or near a hot gas or electric burner or in a heated oven.
• Always attach the plug to the appliance first, and then connect it to an electrical outlet.
• Use the appliance only for its intended purpose.
• This appliance is not intended for use by individuals (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have received supervision or instructions on how to use the appliance safely from a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Avoid looking directly into the UVC light during operation.
• Over time, yellowing inside the product is normal.
• Please ensure that the unit is placed on a flat surface to prevent accidental overturning, which can cause the fountain or function incorrectly.
• Ensure the power cord is properly shielded and organised in a way that prevents pets from biting the cable and causing dangerous situations, such as electric shock.
• This product is suitable for cats or small to medium sized dogs.

COMPONENTS

OVERVIEW

ASSEMBLY

1. Clean the inside of the tank, the lid and the filter tray using a soft cloth.

2. Soak the water filter in clean water for 5 minutes.

3. Fill the tank with clean water.
   Note: Do not exceed the maximum water level.

4. Place the pre-soaked filter into the filter tray.

5. Place the filter tray on the tank and then place the lid onto the filter tray.

6. Connect the power cord to a USB (5V 1A) power adaptor then plug it into an electrical outlet. Note: USB power adapter is not supplied.

CONNECT TO SMARTERHOME™ APP

Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).

https://play.google.com/store/apps/details?id=com.kogan.smarterhome
Play Store (Android)| https://apps.apple.com/au/app/kogan-smarter- home/id1394930704
App Store (iOS)
---|---

To register:

1. If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
2. The system will automatically recognise your country. If needed, you can manually select your country from the drop-down box. Enter your email address and tap ‘Get Verification Code’ to continue.
3. A 6-digit code will be sent to the submitted email address. Enter this code before the one-minute timer expires.
4. Continue to the next page and complete your SmarterHome profile.

Add device through network

1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper right corner, to add a new device through the network.
2. The SmarterHome™ app will begin scanning for nearby devices. If it doesn’t automatically detect the product, proceed to Step 3.
3. Select the product type from the list of options in the app (Other > Kogan Smart Pet Fountain).
4. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.

Notes:

• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order.

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator is flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in pairing mode:

1. Disconnect the power adapter, wait 10 seconds then reconnect it and tap “Next”.
2. Press and hold the mode button for 5 seconds until the Wi-Fi indicator begins flashing rapidly. If the indicator is flashing slowly, press and hold the mode button again for 5 seconds until the Wi-Fi indicator begin flashing rapidly and tap “Next”.
3. Tap “Confirm the indicator is fast blinking” and click “Next”.
4. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
5. After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.

Note:
Once connected, you can select Create Scene from the “+” in the upper right corner (or from the Scene tab) to group connected SmarterHome™ products and automate their functions.
The prior steps detail the process for “EZ Mode” connection. If that does not work for your connection, we suggest trying it again, and if still no success, attempting the following method for “AP Mode” connection.
Using AP Mode to add device

1. Follow the previous steps to select your product type (Other > Kogan Smart Pet Fountain).

2. Adjust your connection method by tapping on the mode type in the top-right corner of the screen. Select “AP Mode” for the set-up type.

3. Disconnect the power adapter, wait 10 seconds then reconnect it and tap “Next”.

4. Press and hold the mode button for 5 seconds until the Wi-Fi indicator begins flashing slowly. If the indicator is flashing rapidly, press and hold the mode button again for 5 seconds until the Wi-Fi indicator begin flashing slowly and tap “Next”.

5. Tap “Confirm the indicator is slowly blinking” and click “Next”. Notes:
   • The device and the app have to use the same Wi-Fi network.
   • The device is only compatible with 2.4Ghz networks.

6. Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. This may be named “SL-KoganSmart”, “SmartLife-XXXX”, or another similar name.
   Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly. Try repeating the steps outlined above to ensure your device is ready for connection.

7. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.

8. After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.

Note:
Once connected, you can select Create Scene from the “+” in the upper right corner (or from the Scene tab) to group connected SmarterHome™ products and automate their functions.

OPERATION

Switching Modes
This product features two different modes: normal and geyser. To switch between the two modes, press the Mode button. Alternatively, you can swap modes using the app.

• Normal Mode: In this mode, water will flow continuously without any interruptions.
• Geyser Mode: When this mode is activated, water will flow for 5 minutes, then pause for 5 minutes before resuming. It’s important to note that during the pause, water will collect in the lid, allowing your pet to continue drinking.

Settings

1. Tap the settings icon in the top right corner of the app to access the device settings.
2. Tap the “Indicator” toggle to turn the device’s indicator ON/OFF.
3. Tap “Working period” to schedule the desired running time of the water fountain and click “OK” to save it.

CLEANING & CARE

• Clean the fountain at least once a week to prevent the build-up of dirt, debris, and bacteria.
• Before cleaning, always unplug the fountain from the power source. Disassemble the fountain components, including the pump, filters, and water tank.
• Rinse all removable parts with warm water to remove any loose debris. Use a mild detergent and a soft brush to scrub away stubborn stains or residue. Avoid using abrasive cleaners or harsh chemicals that could damage the fountain.
• Clean the pump thoroughly as it plays a vital role in maintaining water circulation. Remove any hair, debris, or clogs from the pump to ensure its optimal performance.
• Regularly empty the water reservoir and refill it with fresh water. Stagnant water can promote bacterial growth and affect the water quality.
• Do not overfill the tank beyond the maximum water level indicator. Overfilling can lead to spillage and potential damage to the fountain.
• Perform a deep cleaning of the entire fountain, including all nooks and crannies, every month. This thorough cleaning helps eliminate any hidden debris or bacteria.
• Ensure that your pet’s mouth is clean and free from any debris or foreign objects before they use the fountain.

Filter replacement
It is recommended to replace both the water filter and foam filter every 30 days.
Note: Soak the water filter in clean water for 5 minutes before installing it into the filter tray.

TROUBLESHOOTING

Indicator Status

Mode)
Wi-Fi indicator flashing slowly| Ready to pair with SmarterHome™ App (AP Mode)

SPECIFICATIONS

NOTES
……………………..

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.comkogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>