Kogan KASMW60LT1A Motion Sensor Cupboard and Wardrobe Light User Guide
- June 15, 2024
- Kogan
Table of Contents
kogan.com
MOTION SENSOR CUPBOARD &
WARDROBE LIGHT
(60-LED WITH RECHARGEABLE BATTERY)
KASMW60LT1A
OVERVIEW
1. LED lamp
2. Motion (PIR) Sensor
3. Lamp cover
4. Built in magnet
5. Aluminium shell| 6. Mounting bracket
7. USB charging port
8. Mode button
9. Power Switch
---|---
INSTALLATION
- Attach the Mounting Bracket to the underside of the LED lamp. The built in magnet will hold the Bracket in place.
- Peel off the 3M adhesive backing from the Mounting Bracket and attach the lamp to a flat surface in your desired location.
OPERATION
Charging
- Attach the supplied USB cable to the USB charging port on the lamp.
- Connect the USB cable to an AC power adaptor (phone charger) and plug it into a power outlet.
- Charge the lamp for approximately 3-4 hours to ensure it is fully charged.
- If during operation, the lights appear dim or begin flickering, the battery is low, and it will need to be charged.
Using the lamp
On (Always on mode): Slide the Power Switch to the “On” position to turn
the lights on. The indicator will flash RED 3 times.
OFF: Slide the Power Switch to the “OFF” position to turn the lamp off.
A1 (Motion & light sensor mode):
- Slide the Power Switch to the “A1” position. The indicator will flash GREEN 3 times.
- The lights will turn on automatically when detecting movement in dark lighting conditions.
A2 (Motion sensor mode):
- Slide the Power Switch to the “A2” position. The indicator will flash BLUE 3 times.
- The lights will turn on automatically when detecting movement even in ambient lighting conditions.
Adjusting Brightness: Short press the Mode button to select from the
different modes.
Pressing and holding the Mode button will adjust the brightness of the lights.
Tips:
If the lights are not automatically turning on in Motion & light sensor mode,
there may be too much light. Move the lamp to a darker location.
SPECIFICATIONS
| Power | DC 3.7V |
|---|---|
| Detection range | Up to 3m |
| LED angle | 120° |
| Material | Aluminium alloy & ABS |
| LED life | > 80000 hours |
NOTES
……………………………..
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com.
Documents / Resources
|
Kogan KASMW60LT1A Motion Sensor Cupboard and Wardrobe
Light
[pdf] User Guide
KASMW60LT1A Motion Sensor Cupboard and Wardrobe Light, KASMW60LT1A, Motion
Sensor Cupboard and Wardrobe Light, Sensor Cupboard and Wardrobe Light,
Wardrobe Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>