QNAP QSW-M3200R Desktop 10G Managed Switch Installation Guide

QSW-M3212R-8S4T/
QSW-M3216R-8S8T
Quick Installation Guide

QSW-M3200R Desktop 10G Managed Switch

Hardware Installation

Accessing the Web User Interface

By default, the QSW-M3216R-8S8T and QSW-M3212R-8S4T switch series support DHCP clients. When connected to a network, the switch automatically obtains an IP address from a DHCP server. You can then use Qfinder Pro to locate the switch and access QSS.
If the device is unable to connect to a DHCP server to obtain an IP address, you can access the web user interface by changing the IP address of the computer to 169.254.100.102.
Note : Ensure that you change the IP address of the computer to its previous setting after configuring the switch.
The default IP address of the switch is 169.254.100.101.

Logging into the Web User Interface
Default username : admin
Default password : The default password is the first MAC address in uppercase letters without special characters. For example, if the first MAC address is 00-08-9B-F6-15-75, then the admin password would be 00089BF61575.

Hardware Overview

Front Panel Ports

1. Reset button
2. RJ45 Management port
3. 10GbE RJ45 ports
4. 10GbE SFP+ ports
5. RJ45 Console port

LED Behavior

• The firmware is being updated.
Note : When updating the firmware, do not remove the power cord or USB cable, and do not force-exit the application.
• The device is being reset.
Red| A fatal device error occurred.
Off| The device is powered off.
② Locator| Flashing Amber| Indicates the physical location of the switch. The default timer is 30 minutes when you are configuring the switch. The locator LED flashes for 30 minutes when configuring the switch.
Off| • The switch is cloud management mode.
• The switch failed to connect to the cloud.
③ Management port (Left-speed)| Green| The link speed is operating at 1 Gbps.
Amber| The link speed is operating at 100 Mbps.
Flashes Green or Amber| Data is being transmitted.
Off| There is no network connection.
③ Management port (Right-link and activity)| Amber| The port is operating as an uplink port.
Flashes Amber| Data is being transmitted.
Off| There is no network connection.
④ 10GbE RJ45| Green| The link speed is operating at 10 Gbps.
Flashes Green| Data is being transmitted.
Amber| The link speed is operating at 5 Gbps, 2.5 Gbps, 1Gbps, or 100Mbps.
Flashes Amber| Data is being transmitted.
Off| There is no network connection.
⑤ 10GbE SFP+ (Left)| Green| The link speed is operating at 10 Gbps.
Flashes Green| Data is being transmitted.
Off| There is no network connection.
⑤ 10GbE SFP+ (Right)| Amber| The link speed is operating at 1 Gbps.
Flashes Amber| Data is being transmitted.
Off| There is no network connection.

Specifications

Download Center www.qnap.com/download
Visit Download Center for our full guides and utilities.

Conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Modifications: Any modifications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment.
This device complies with CE compliance Class A.
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP Electronics products subject to the WEEE directive.
**** This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Office in EU;
QNAP GmbH,
Karl-Arnold-Straße 26,
47877 Willich, Germany| Office in UK;
QNAP Ltd,
2 Drakes Meadow, Swindon SN3 3LL
United Kingdom
---|---

** This device complies with the UKCA requirements for products sold in Great Britain.
THIS PRODUCT CONTAINS A BUTTON BATTERY
WARNING**
If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours.
Keep batteries out of reach of children.
If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
Operation of this equipment in a residential environment could cause radio interference.

install.qnap.com| service.qnap.com| download.qnap.com
---|---|---

Documents / Resources

| QNAP QSW-M3200R Desktop 10G Managed Switch [pdf] Installation Guide
QSW-M3200R Desktop 10G Managed Switch, QSW-M3200R, Desktop 10G Managed Switch, Managed Switch, Switch
---|---

References

• download.qnap.com
• Cloud Install
• Customer Service - QNAP
• Download Center | QNAP (US)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>