kogan KALAMPMG31A Rechargeable Magnetic Table and Wall Lamp User Guide

User Guide RECHARGEABLE MAGNETIC
TABLE AND WALL LAMP

SAFETY & WARNINGS

• Do not expose the lamp to water or other liquids.
• Only use a 5V power supply when charging the lamp. Do not use any charging cables or adapters above 5V.
• Do not attempt to open the lamp or modify its components in any way.
• Keep the lamp away from heat sources and flammable materials.
• Do not place the lamp in a position where it may fall or be knocked over.
• Do not use the lamp if it appears damaged or defective in any way.
• Do not touch the lamp’s internal components while it is charging or in use.
• Keep the lamp away from children and pets.
• Do not use the lamp in wet or damp conditions.
• Do not look directly into the light source, as this may cause eye strain or damage.
• Use the lamp only for its intended purpose, as described in this user guide.
• If the lamp overheats or emits an unusual odour, cease use immediately and contact help.Kogan.com for support.
• Always ensure that the lamp is properly mounted or secured when using it as a wall lamp.
• Avoid touching the lamp’s metal surfaces while it is in use, as they may become hot.

COMPONENTS

OVERVIEW

OPERATION

The rechargeable magnetic table and wall lamp is designed to be used in a variety of settings. It can be used as a table lamp, bedside lamp, or mounted on a wall.
Lamp Stand

1. Secure the stand base to the stand arm using the supplied screw and Allen key.
2. Attach the lamp to the steel ball on the stand.
3. Adjust the angle (360° rotation) of the lamp as required.

Wall Mount

1. Select a clean, flat location for the wall mount.
2. Peel off the adhesive backing and adhere the wall mount to the wall.
3. Attach the lamp to the steel ball on the wall mount.
4. Adjust the angle (360° rotation) of the lamp as required.

Charging the Lamp

1. Locate the charging input on the rear of the lamp.
2. Connect the USB-C end of the charging cable into the charging input.
3. Insert the other end of the cable into a USB port on your computer or a 5V USB power adapter.
4. During charging, the charging indicator will be RED. Once the lamp is fully charged the indicator will turn GREEN.
   Note: If the lamp is in use during operation, the lamp will take longer to fully charge.

Using the Lamp
Touch the power button to turn the lamp on. To turn off the lamp, press and hold the power button.
The lamp has three brightness settings that can be cycled through by tapping the power button.

CLEANING & CARE

• Use a soft, dry cloth to clean the lamp and remove any dust or debris.
• Do not use any cleaning agents or water on the lamp, as this could damage the electronics.
• If the lamp becomes soiled, you can use a slightly damp cloth to wipe it down. Make sure to dry the lamp thoroughly before use.
• Do not use any corrosive liquids to clean the lamp or its components.
• Do not immerse the lamp in water or any other liquids.
• Keep the lamp away from sources of moisture, such as bathrooms or kitchens.
• If you need to store the lamp for an extended period of time, make sure to fully charge it before doing so.
• Do not expose the lamp to extreme temperatures or humidity.
• If you notice any issues with the lamp, such as a malfunctioning touch button or dimming light, contact help.Kogan.com for support.
• Do not attempt to repair the lamp yourself, as this could be dangerous.
• When mounting the lamp on a wall, make sure the mounting surface is clean and free of any debris or particles that could interfere with the lamp’s magnetic attachment.

TROUBLESHOOTING

If the lamp does not turn on:

• Check if the lamp is charged. Make sure the lamp is fully charged by connecting it to a power source using the included charging cable. Wait for a few hours to ensure the lamp is charged, and then try turning it on again.

• Ensure the power button is not covered with dust or debris. Clean the button with a soft, dry cloth if required.

• There may be a problem with the charging cable. If the charging cable is damaged or not working correctly, the lamp may not charge, which can prevent it from turning on.
  Try using a different charging cable to see if this resolves the issue.

• Check the power supply. Try using a different power outlet or USB port to see if this resolves the issue.

• If none of these troubleshooting steps resolve the issue, contact help.Kogan.com for support.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>