kogan KAKIDSMWTBA Play 2 Kids Smart Watch User Guide
- June 15, 2024
- Kogan
Table of Contents
kogan KAKIDSMWTBA Play 2 Kids Smart Watch
SAFETY & WARNINGS
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.
- This watch must be charged for at least 3 hours before first use.
- Misuse of batteries can lead to them bursting, causing a fire, or chemical burns.
- Do not disassemble this watch.
- Do not crush or expose the battery to shock or force (for example, dropping or stepping on it).
- Do not short circuit the watch.
- Do not expose the watch to high temperatures or place it near heat sources (fires, stoves, heaters).
- Do not expose the watch to direct sunlight.
- Do not expose the watch to high moisture areas, and do not allow it to touch or submerge in water or any other liquid.
- If the battery within the watch is damaged or leaking, stop use immediately and contact help.Kogan.com for assistance.
- Keep the battery dry and out of the reach from children.
- If the watch is damaged, stop use immediately and contact help.Kogan.com for assistance.
- Charging should only be performing by an adult.
- The battery within cannot be disposed in normal waste. If disposing, follow local regulations.
Care Instructions for Waterproof and Dustproof Features
The watch is waterproof and dustproof. Follow the below guidelines to maintain the waterproof and dustproof function. Otherwise, your device may be damaged.
- Do not use the watch under high pressure water.
- Do not use the watch when diving, snorkeling or other sports in turbulent water.
- Do not use the watch in sauna rooms. The waterproof function may be impacted.
- Always dry your hands and watch fully before operating.
- If the watch is exposed to water, dry it fully with soft cloth. If it is exposed to other liquids (such as salt water, pool water, soapy water, oil, perfume, sunscreen, hand sanitizer) or chemicals, wash it with clean water and dry it completely with a soft cloth.
- If the watch is dropped or hit, the waterproof and dustproof function may be impacted.
- Do not disassemble your watch. The waterproof and dustproof function may be damaged.
- Do not use the watch in extremely high or low temperature environments.
- Do not use blowers or heating equipment to dry the watch.
Cleaning and Maintenance
Follow the below points to ensure that the watch operates normally and continues to look good. Failure to do so may cause skin irritations.
- Protect the watch from dust, sweat, ink, oil and chemical products (cosmetics, antibacterial sprays, sanitizers and insecticides etc.). Otherwise, the internal and external parts may be damaged or causes performance degradation.
- If the watch becomes stained, clean it with lint-free soft cloth.
- When cleaning the watch, do not use soap, detergent, abrasive materials, compressed air, ultrasonic waves or external heat sources. Otherwise, the watch may be damaged. Soap, detergent, hand sanitizer or detergent residue may cause skin irritation.
- After exercising or excessive sweating, clean your wrist and watch strap. Use water to clean the watch. A small amount of alcohol can be used to wipe the watch. Allow the watch to dry thoroughly.
- If the watch is stained, use a wet soft toothbrush to clean it.
Allergies and Skin Irritations
- This watch has been tested for hazardous materials both internally and externally, including testing of all materials that contacts skin, skin toxicity testing and wear testing.
- This watch contains nickel. If your skin is very sensitive or you are allergic to the materials used in the watch, take necessary precautions.
- The watch contains a small amount of nickel. The content is lower than the reference value of European REACH regulations. You will not be exposed to the nickel in the watch. However, if you are allergic to nickel, use this watch with caution.
- All materials used in the watch comply with relevant inspection standards such as REACH and RoHS.
OVERVIEW
COMPONENTS
- Smart Watch
- User Guide
- Charging cable
OPERATION
Note:
Ensure the smart watch is charged fully before first use.
Charging
The watch automatically turns on once it has been charging for at least 30
minutes. To charge, attached the supplied magnetic charging cable to the
magnetic charging contacts on the back of the smart watch.
Attach the opposite end of the cable into a USB power adapter (not supplied).
Ensure the adapter meets the specified voltage and current (5V/2A).
Notes:
Do not use a charger exceeding 5V/2A for charging.
Wearing
Wear it correctly: make sure that the bottom sensor is properly attached to the skin and the strap shall be one finger away from the wrist.
Operating the Watch
- Powering on : When the watch is off, press and hold the touch screen for 5 seconds to turn it on. The home screen of the watch will be displayed.
- Touch screen operation : From the home screen;
- Swipe to the left to access the menu, then tap the function icon to enter the corresponding sub-menu.
- Swipe to the right to the games list menu, then choose one to play (“3 to win” & “Racing Car”).
- Wake up screen : When the watch screen is off, you can touch the screen to wake up the screen. If the gesture control button has been enabled in the app, you can also wake up the screen by turning your wrist.
- Shutdown : Swipe down, click the setting icon and then select “System → Shut down”. Tap the green tick to confirm and shut down.
Removing the Strap
To remove the straps from the watch, slide the quick release towards the
outside of the watch and pull the strap away from the watch.
PAIRING WITH THE APP
For Android users, open Google Play Store on your smartphone.
For iOS users, open app Store on your iPhone.
Search for “HitFit Pro” and download the app.
Alternatively, scan this QR code on your device to open the appropriate store
for your device and go straight to the app download page.
Bluetooth Connection
-
Ensure Bluetooth and GPS has been enabled on your phone.
-
Install and open the “HitFit Pro” app.
-
In the home screen, press “Personal centre → Device” to begin searching for nearby devices.
-
You will see a list of devices. Select the watch and continue with the pairing process.
-
Light up the smart watch screen and bring it close to your phone.
-
In “Setting” menu on the watch, select “System → System version” to confirm the watch’s Bluetooth name.
-
If connected successfully, the paired icon will be displayed in the watch’s status bar.
-
During the pairing process, you will be prompted to enable GPS and Bluetooth and authorize “HitFit Pro” to get access to the GPS on your mobile phone. Agree to all the permission prompts.
-
In order for iOS devices order to receive notifications or information from the watch, you need to first establish a Bluetooth connection by pairing the watch with your phone’s built-in Bluetooth after the initial binding process.
Notes:
For iOS devices, it’s necessary to agree to pair your phone with the Smart
Watch in order to display iPhone notifications. The successful connection of
the Smart Watch will be indicated in the Bluetooth menu of the phone
interface, as shown below.
Synchronizing Data
Ensure you have paired your watch with the “HitFit Pro” app.
Open the app, in the home page screen, swipe down on the screen and release or
click the Sync icon in the upper right to synchronize data. Your data will be
shown on the App accordingly.
Tips:
- Do not pair the watch directly from the Bluetooth menu in your mobile phone’s settings. Always use the “HitFit Pro” app to pair the watch to your phone.
- While clearing software in the background or closing background applications, avoid disabling the Bluetooth notification service, as doing so can impact the synchronization between the watch and the phone.
- If you want your watch to receive third-party notifications, you will need to turn on the respective notification permissions.
OPERATION
- Swipe right: Display the games list (3 to win, Racing car).
- Swipe down: Display Battery, Bluetooth, Time, Date, Brightness, Timer, Alarms, Setting.
- Swipe up: Messages, Heart rate monitoring, Daily activity.
- Swipe left: Select from one of the features “Daily activity, Sports, Sports record, Alarms, Heart rate, Sleep, Weather, Settings” tap to enter the corresponding function, swipe right to return to the previous level.
Watch Faces
Press and hold the touchscreen to select the one of the six available watch
faces.
Screen Lock
You can turn on the Screen lock or Games lock after setting a password to prevent your child from overusing. If the Screen lock is enabled, a password will be required to unlock the watch.
- Tap the profile icon in the upper left corner of the app’s home screen.
- Select “Screen lock” and tap the toggle to enable it.
- Tap “Password”, select a 6-digit password and tap “OK” to confirm.
- Synchronise your watch.
Games Lock
You enable a game lock to limit the times your child can access the games on their watch.
- Tap the profile icon in the upper left corner of the app’s home screen.
- Select “Games lock” and tap the toggle to enable it.
- Tap “Time setting” to select the time restrictions and tap “OK” to confirm.
- Tap “Password”, select a 6-digit password and tap “OK” to confirm.
- Synchronise your watch.
Basic Functions
-
Daily activity
The watch will display the user’s total number of steps on the day, walking distance, calories burned on the same day and the data will be cleared at 0 o’clock (midnight) every day. -
Sports
In sports mode: the single-point function icon allows you to enter sports modes such as Walking, Running, Climbing, Riding, Basketball and Free sports. -
Sports record
If you have done any sports and saved the data, in this function will show the information of sports record. -
Alarms
You can set alarms in the app. The watch will show the alarm details. When the alarm time is up, the watch will pop up as a reminder. -
Heart rate
Function introduction : The watch will measure the user’s heart rate using the heart rate sensor.
After the test is completed, the watch will display the result. If there is no user input, the screen will automatically turn off.
Operating instructions : Swipe to the left on the main interface and click the heart rate icon. Once the interface is entered, the measurement will start. During the measurement, the interface value will be zero. After the measurement is completed, the value will be displayed.
-
Sleep
Function introduction : The watch will display the user’s sleep time the night before. (Sleep measurement time 21:30 – 12:00 next day)
Operation instructions : Swipe the main interface left and right, click sleep to switch to the sleep interface, you can view the sleep time of the previous day.
-
Weather
After connected with “HitFit Pro” app, the watch will show local weather and the updated time.
-
Settings -
Language : Select different languages.
-
Screen display : Change dial, Brightness, Screen time, Turn wrist wake setting.
-
Do not disturb : Enable/disable “Do not disturb” mode.
-
Vibration : Set vibration intensity.
-
Time : Set the time.
-
Date : Set the date.
-
Time display : Choose the time display mode.
-
System : System version, Shutdown, Reset settings.
SPECIFICATIONS
- CPU RTL8762CK
- ARM Cortex-M0 53MHz
- Memory RAM 128KB + ROM 128Mb
- Capacitive touch screen 1.4” IPS 240×240 screen
- Bluetooth version 5.0
- Battery Lithium-ion 3.7V/180mAh
- Function IP68 waterproof, Games, Heart Rate, Sleep, Daily activity, Sports, Stylish Dials Push, DIY favourite dial customized, Weather, Notification (Ins/Facebook/Skype/WhatsApp etc.)
- Other features Timer, do not disturb mode, Screen lock, Alarms, show time setting, multi-Languages supported, replaceable strap
Customer Support
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>