kogan KA17KETGLSHA Double Walled Smart Kettle User Guide
- June 15, 2024
- Kogan
Table of Contents
KA17KETGLSHA Double Walled Smart Kettle
User Guide
KA17KETGLSHA Double Walled Smart Kettle
1.7L DOUBLE WALLED
SMART KETTLE
KA17KETGLSHA
SAFETY & WARNINGS
Ensure to read all the instructions in this user guide prior to first use. Retain this user guide for future reference. Misuse of the kettle may cause potential injuries.
- This kettle is not intended to be used by persons (including children under 8 years) with reduced physical, sensory or mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction regarding the use of the kettle by a person responsible for their safety.
- Close supervision is required when this kettle is used by or near children. Ensure they do not play with the appliance.
- Keep the kettle and its power cord out of reach of children aged less than 8 years.
- This kettle is intended to be used in households and similar applications such as:
- Staff kitchen areas in shops, offices, and other working environments.
- Farmhouses.
- By clients in hotels, motels, and other residential-type environments.
- Do not use this kettle outdoors.
- Do not use this kettle for any purpose other than its intended use.
- The kettle will get hot during use. Do not touch it directly. When handling, use the handle.
- To protect against fire, electric shock, or injury to persons, do not immerse any parts of the appliance into water or any other liquids.
- The kettle is only to be used with the stand provided.
- This kettle should be used with a residual current device (safety switch) to lessen the risk of scalding or other injuries from hot water that may be ejected if the heating element ruptures.
- Do not operate the kettle on an inclined plane.
- Do not operate the kettle if the kettle is not securely placed onto the base.
- Do not move the kettle whilst it is operating.
- Do not spill anything on the power cord or base.
- Avoid spillage on the connector.
- If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance.
- If the kettle is damaged or has malfunctioned, unplug the kettle and stop use immediately. Contact help.Kogan.com for assistance.
- Do not attempt to repair the kettle yourself.
- Do not operate the kettle unless the element is fully immersed.
- Unplug the kettle from the power outlet when not in use and when cleaning.
- Do not let the power cord hang over the edge of the table or counter.
- Do not allow the power cord to touch hot surfaces.
- Do not place the kettle on or near a hot stove or in a heated oven.
- Never forcibly pull on the power cord to disconnect. Turn off the power and pull the power cord out close to the wall outlet.
- Do not use the kettle to heat anything other than water.
- Do not fill above the ‘MAX’ indicator otherwise water may overflow when heating.
- Do not operate the kettle if the amount of water is below the minimum level.
- Do not use alkaline cleaning agents on this kettle.
- Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.
- Electrical appliances are not to be disposed of with domestic household waste. Consumers should take electrical appliances to waste disposal points for the correct disposal.
This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
OVERVIEW
Control Panel
Buttons
| Power: This is a multifunctional button and it can be regarded as 100°C
button, Power button or Keep-warm button (hold and press it for 3 seconds)
---|---
| Temperature selector: 50°C/70°C/80°C/90°C
Before First Use
If you are using the kettle for the first time, it is recommended that you
should clean your kettle before use by boiling a full kettle of water twice
and then discarding the water.
Note:
The max capacity of kettle is 1.7L.
Using Your Water Kettle
To fill the kettle, remove it from the power base and open the lid by pressing
the Lid Release button, fill with the desired amount of water and then close
the lid. Alternatively, the kettle may be filled through the spout. The water
level should not exceed MAX marks or sit below MIN level. Too little water
will result in the kettle switching off before the water has boiled.
Note:
Do not fill the water over the maximum level, as water may spill out of the
spout when boiling. Ensure that the lid is family in place before plugging the
power outlet.
- Place the kettle on the power base and connect the plug into a power outlet.
Note:
The power base can be rotated by 360 degree to facilitate the plug connecting
with power outlet.
OPERATION
-
Boil water Place the kettle onto the power base, press “100°C” button, the kettle starts to work and heat the water up to 100°C directly, at that time, the indicators in the control panel do not light up and the indicator in the kettle illuminates red. When the water temperature reaches 100°C, the indicator in the kettle will turn off and two beeps can be heard.
-
Heat water to selected temperature Place the kettle onto the power base, press the “+/-” button to select your desired water temperature (50°C, 70°C, 80°C, 90°C), after selecting it, its corresponding indicator turns on. Press “100°C” button, the kettle starts to work and heat the water to the selected temperature, at that time, all the indicators turn off and two beeps can be heard.
-
Keep warm at the selected temperature Place the kettle onto the power base, press “+/-” button to select your desired keep-warm temperature (50°C, 70°C, 80°C, 90°C), after selecting it, its corresponding indicator turns on.
Press the “100°C” button for 3 seconds and the kettle will enter into keep- warm mode after heat the water to the selected temperature, at that time, the indicator of the selected keep warm temperature keeps blinking.
When the water temperature reaches the selected temperature, one beep can be heard and the kettle will enter into the keep-warm condition.
After keeping warm for 30 minutes, the kettle will shut off automatically and all the indicators will turn off.
Note:
Ensure that switch is free of obstructions and the lid is firmly closed. The kettle will not turn off if the switch is constrained or if the lid is opening. -
Lift the kettle from the power base and then pour the water.
Note:
Operate carefully when pouring the water from your kettle as boiling water may result in scald, besides, don’t open the lid while the water in the kettle is hot.
The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power base when not in use.
Note:
Ensure power supply is turned off when kettle is not in use.
Keep warm mode
- In this mode, after heating, the kettle will keep water at the desired temperature and the keep warm indicator will be illuminated. The kettle will then automatically switch on/off to maintain the water’s temperature.
- With power-on, place the kettle onto the power base, all four indicators in the control panel turn on and one beep can be heard.
- At the same time, the indicator in the kettle lights up in red, green, blue in sequence and then turns off and the indicators in the control panel turn off simultaneously, together with one beep heard.
- Different colours for indicating different temperatures: The indicator in the kettle will illuminate in different colours under different water temperature at any condition.
o 50°C (blue)
o 70°C (green)
o 80°C (yellow)
o 90°C (orange)
o 100°C (red).
Boil-Dry Protection
Should you accidentally let the kettle operate without water, the boil-dry
protection will automatically switch off the power. If this occurs, allow the
kettle to cool before filling with cold water to re-boil.
CLEANING & CARE
The kettle should be cleaned regularly to remove any mineral deposits and to
prolong its service life.
Ensure the kettle is unplugged and allowed to cool before cleaning.
Kettle
- Fill the kettle with 500ml of white vinegar and then fill it to the top with water. Allow to stand for at least 1 hour.
- Empty the kettle. Wipe off any remaining deposits with a damp cloth.
- Fill the kettle with fresh water. Bring to the boil, then discard the water. Repeat this process once more. The kettle will then be ready to use.
Note:
If necessary, repeat the cleaning process multiple times.
Exterior
Wipe the exterior with a soft cloth and mild detergent, then wipe dry with a
dry cloth.
Notes:
- Do not use chemicals, steel wool, or other abrasive cleaners to clean the exterior as these will scratch the surface and cause the colour to fade.
- Do not use alkaline cleaning agents when cleaning.
Removal Of Scale
Your kettle should be periodically descaled by virtue of the mineral deposits
in tap water may form scale on the bottom of kettle so as to cause the
efficiency of operation less. You can use the commercially available descales
and follow the instructions on the package of descales. Alternatively, you
may follow the instructions as below to use the white vinegar.
- Fill the kettle with 3 cups of white vinegar, then adding water to the amount so as to cover the bottom of kettle completely. Leave the solution in the kettle overnight.
- Then discard the mixture in the kettle, filling the kettle with clean water, boiling and then throw it away. Repeat several times until the Odor of vinegar has been flushed away. Any stains remaining inside the spout can be removed by rubbing with a damp cloth.
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>